HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (2 Nov 2024)

CNCA C06-01-2014 PDF in English


CNCA C06-01-2014 (CNCAC06-01-2014) PDF English
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
CNCA C06-01-2014English145 Add to Cart 0-9 seconds. Auto-delivery. China Compulsory Certification Implementation Rules - Welder
Standards related to (historical): CNCA C06-01-2014
PDF Preview

CNCA C06-01-2014: PDF in English

CNCA-C06-01.2014 CNCA / CCC Serial No.. CNCA-C06-01.2014 CNCA-C06-01-2014 China Compulsory Certification Implementation Rules - Electric Welding Machine ISSUED ON. JULY 16, 2014 IMPLEMENTED ON. SEPTEMBER 1, 2014 Issued by. Certification and Accreditation Administration of the People's Republic of China now the Sales Manager (Founder and Managing Director) at expertise and hands-on working experiences, through his then-employment as “China Certification Program Manager” at BlackBerry Beijing, and “Product Safety & Compliance (PS&C) Manager” at Motorola Singapore. - CNCA / China Compulsory Certification (CCC) regulations. - Hands-on program experience with regulator CNCA for CCC mark’s compliance, approval and management. - Was an authorized representative by then-employer BlackBerry (RIM) to liaise with Chinese regulators, authorities, certification bodies and delegated laboratories – including CNCA, CQC, Beijing Communication Authority, Beijing Administration of Quality Supervision Inspection and Quarantine. - Hands-on program experience with certification body CQC for “certification entrusting”, type test, initial factory audit, regular / annual factory audit (i.e. the “supervision after certification” in this Rules). - Manage, plan, guide and site-visit the global factories / suppliers’ global factories (i.e. the “manufacturing enterprises” in this Rules) in North America, Europe and China for CQC initial factory audit and regular annual factory audit (supervision after certification). - ISO Process Auditor, certified by Motorola USA & Motorola Singapore - PMP, certified by Project Management Institute USA. < 2 hours in office time; < 10 hours in off-office time. Table of Contents 0 Introduction ... 4  1 Application scope ... 4  2 Certification standards ... 5  3 Certification modes ... 5  4 Classification of certification units ... 6  5 Certification entrusting ... 6  6 Certification implementation ... 7  7 After-certification supervision ... 9  8 Certificate ... 11  9 Certification marks ... 13  10 Charges ... 13  11 Certification responsibility ... 13  12 Certification Implementation Detailed-Rules ... 14  0 Introduction This Rules is established based on the security risk and certification risk of welder. It stipulates the basic principles and requirements for the implementation of China Compulsory Certification for welder. This Rules can be used with other general rules issued by Certification and Accreditation Administration (CNCA), such as “China Compulsory Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination”, “China Compulsory Certification Implementation Rules - Utilization of Manufacturing Enterprise Testing Resource and Other Certification Results”, “China Compulsory Certification Implementation Rules - Factory Inspection General Requirements”. The certification body shall make principles for certification according to the general implementation rules and this Rules and implement them accordingly. Manufacturing enterprise shall ensure that their certified products are capable of sustaining the compliance with the certification and are compatible with the requirements of the standards. 1 Application scope This Rules applies to welder products. Specifically it applies to the low voltage powered- or mechanical driven welding equipment, the equipment and auxiliary equipment that use similar processes, including. small-sized AC arc welding machines, AC arc welding machines, DC arc welding machines, TIG arc welding machines, MIG / MAG arc welding machines, submerged arc welding machines, plasma arc welding machines, plasma arc cutting machines, resistance welding machines, welding transformer’s anti-electric shock devices, welding cable coupling devices, wire feeders, TIG welding torches, MIG / MAG guns, and welding pliers. Due to the changes in the law, regulations or related product standards, technology, industry policies and other causes which may change the applicable scope, the announcement released by CNCA shall be final and conclusive. to determine the certification mode that is applicable to the certification client. [TRNASLATOR NOTE is not part of this Rules. Translator note. “certification client”, the counterpart of certification body, refers to the Applicant / Manufacturer or its proxy (Power of Attorney). For ease of reading, hereinafter abbreviated as “CLIENT”]. 4 Classification of certification units  For products that are subjected to same-standards, same-function, same-working principle (main circuit and control mode), and same-structure (power supply voltage, cooling mode, assembly structure of main components, etc.), they be applied as a certification unit. For small-sized AC arc welding machines, AC arc machines, resistance welding machines, welding cable coupling devices, welding torches (guns), welding pliers, etc., it shall also consider the consistency of critical materials. For the products that are same and produced by the same-producer (manufacturer) or different manufacturing enterprises, or the products that are same and produced by different producers (manufacturer) or same-manufacturing enterprise, the type test may be conducted on only 1 certification unit; the products of other manufacturing enterprises / manufacturers must provide documents for conformity inspection. Certification body shall be based on relevant provisions of the documents issued by CNCA, and combine with manufacturing enterprise classification management, to clarify the specific requirements of division of certification unit in Certification Implementation Detailed-Rules. 5 Certification entrusting 5.1 Application and acceptance of certification entrusting CLIENT must put forward the certification entrusting to the certification body, in an appropriate way. Certification body shall process the certification entrusting; and feedback the acceptance or rejection according to the time limit in the certification implementation rules. When it does not comply with national laws and regulations AND relevant industry policies, the certification body must not accept the certification entrusting. 5.2 Application materials The certification body shall, in accordance with the laws and regulations, standards and other requirements, specify the checklist of application materials in the Certification Implementation Detailed-Rules (It shall at least includes certification application form or contract, registration certificates of the CLIENT / manufacturer / manufacturing enterprise etc.). samples. If laboratory has any doubt on the authenticity of the samples, it shall explain the situation to certification body and handle accordingly. According to relevant regulations and documents issued by CNCA, certification body shall, in the Certification Implementation Detailed-Rules, define the “product critical components and raw materials list” AND relevant requirements. For the critical components and materials that are within the CCC certification scope and are purchased in domestic market, manufacturing enterprise shall provide the CCC certificate. For the critical components and materials that are not within the CCC certification scope, certification body shall clarify, in Certification Implementation Detailed-Rules, the conditions and specific requirements of acceptable or recognizable voluntary certificates or type test reports. 6.1.3 Inspection items of type test In principle, except those involving GB/T8118 are only required to test 6.15 Noise and 6.16 Damp-heat, test items of type test of the rest welding machines shall be all applicable items as specified by product standards. 6.1.4 Implementation of type test In principle, type test shall be conducted in the laboratory designated by CNCA. Laboratory shall conduct the type test to the samples, integrally record the whole test and archive for retaining, so that the test process and results are traceable. On the premise that the validity of certification result is not affected, certification body may base on “China compulsory certification Implementation Rules – Utilization of Manufacturing Enterprise Test Resource and Other Certification Results”, to formulate relevant management procedure; then the designated laboratory disperses test personnel, according to standard’s requireme... ......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.