GB/T 1762-1980 English PDF
Price & Delivery
US$75.00 · In stock · Download in 9 secondsGB/T 1762-1980: Method of test for after-tack of paint films
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 1762-1980 | 75 | Add to Cart | Auto, 9 seconds. | Method of test for after-tack of paint films |
Click to Preview this PDF
GB/T 1762-1980: Method of test for after-tack of paint films
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1762-1980GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA GB/T 1762-1980 (GB 1762-80) Replacing GB 1762-79 Method of test for after-tack of paint films Implemented on: DECEMBER 01, 1980 Issued by. State Administration for Market Regulation; Proposed by. Ministry of Chemical Industry of the People's Republic of China Drafted by. Coatings Industry Research Institute, Ministry of Chemical Industry
Table of Contents
1 General provisions... 3 2 Measurement method... 3 3 Rating... 4 Method of test for after-tack of paint films This Standard applies to the test for after-tack of paint films. The phenomenon of paint films sticking together after drying due to the influence of certain temperature and humidity is called after-tack of paint films.1 General provisions
Materials and instruments Filter paper. Medium-speed quantitative filter paper, 20×20 mm; After-tack tester. 500 grams, base area of 1 cm², flat and smooth surface required, as shown in the figure. Tinplate. 50×120×0.2~0.3 mm; Temperature and humidity control chamber. model DL302; Magnifying glass. 4x.2 Measurement method
Prepare a paint film on a tinplate by brushing according to General method of paint film (GB 1727-79). After painting, allow to dry under constant temperature and humidity conditions for 48 hours. Place the filter paper with the smooth side down on the paint film at least 1 cm from the edge of the sample; put it into a temperature and humidity control chamber; place the after-tack tester, which has been preheated at a temperature of 40±1℃ and a relative humidity of 80±2%, in the center of the filter paper; close the temperature and humidity control chamber. Raise the temperature to 40±1℃ and the ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.