GB/T 20049-2025 PDF English
Price & Delivery
US$155.00 · In stock · Download in 9 secondsGB/T 20049-2025: Ride identification number
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 20049: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 20049-2025 | 155 | Add to Cart | Auto, 9 seconds. | Ride identification number | Valid |
| GB/T 20049-2006 | 70 | Add to Cart | Auto, 9 seconds. | Amusement devices code name | Valid |
Click to Preview this PDF
Similar standards
GB/T 20049-2025: Ride identification number
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20049-2025GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.200.40 CCS Y 57 GB/T 20049-2025 Replacing GB/T 20049-2006 Ride identification number Issued on: MAY 30, 2025 Implemented on: SEPTEMBER 01, 2025 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Content and composition of ride identification number... 6 4.1 Basic composition of ride identification number... 6 4.2 Ride property code (RPC)... 7 4.3 Ride feature code (RFC)... 7 4.4 Manufacture identification number (MIN)... 10 4.5 Separators... 10 4.6 Determination of ride identification number... 10 5 Marking location of ride identification number... 10 6 Marking method and requirements for ride identification number... 11Foreword
This document was drafted in accordance with the provisions of GB/T 1.1-2020 “Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents”. This document replaces GB/T 20049-2006 “Amusement devices code name”. Compared to GB/T 20049-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. - MODIFY the scope (see Clause 1 of this document, Clause 1 of the 2006 edition); - DELETE “Amusement devices code name”, “Code name descriptions” and “Code name examples” (see Clauses 2, 3 and 4 of the 2006 edition); - ADD the terms and definitions (see Clause 3 of this document); - ADD the content and composition of ride identification number (see Clause 4 of this document); - ADD the marking location of ride identification number (see Clause 5 of this document); - ADD the marking method and requirements for ride identification number (see Clause 6 of this document). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by and shall be under the jurisdiction of National Technical Committee on Ropeways and Amusement Rides of Standardization Administration of China (SAC/TC 250). Drafting organizations of this document. China Special Equipment Inspection and Research Institute, Huaqiang Fantawild Culture & Technology Group Co., Ltd., Guangxi Zhuang Autonomous Region Special Equipment Inspection and Research Institute, Henan Special Equipment Inspection and Research Institute, Beijing Wiegand Slide Conveying Equipment Co., Ltd., Beijing Shibaolai Amusement Device Co., Ltd., Zhejiang Southern Cultural and Tourism Technology Co., Ltd., Ma’anshan Yuedong Amusement Device Co., Ltd., Lianyungang Yaqiao Machinery Manufacturing Co., Ltd., Zhejiang Chowchow Education Technology Co., Ltd., Chengdu Tailong Amusement Industry Co., Ltd., Guangdong Daxin Amusement Intelligent Technology Co., Ltd., Shijiazhuang Haoyunlai Slide Co., Ltd. Main drafters of this document. Shen Gongtian, Zhang Kun, Zhang Pengfei, Liang Chaohu, Liu Ran, He Shimin, Zhang Yong, Liu Hui, Ye Haibo, Ma Xiaobin, Wang Ride identification number1 Scope
This document specifies the content and composition, marking location, marking method and requirements for ride identification number. This document applies to passenger-carrying amusement rides, including large-scale amusement rides, small-scale amusement rides, inflatable amusement rides and glass water slides.2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 8408 Large-scale amusement device safety code GB/T 20306 Amusement devices terminology GB/T 28622 No power type of amusement devices - Terminology3 Terms and definitions
For the purpose of this document, the terms and definitions defined in GB 8408, GB/T 20306 and GB/T 28622, as well as the following, apply. 3.1 ride identification number; RIN A code assigned by the amusement ride manufacturer to identify a particular amusement ride. 3.2 ride property code; RPC The first part of the ride identification number (RIN), used to describe the general properties of the amusement ride. 3.3 ride feature code; RFC The second part of the ride identification number (RIN), used to describes the structural and motion characteristics of the amusement ride. 3.4 manufacture identification number; MIN The third part of the ride identification number (RIN), which is the unique manufacturer identifier of the amusement ride.4 Content and composition of ride identification number
4.1 Basic composition of ride identification number The ride identification number (RIN) consists of three parts. the ride property code (RPC), the ride feature code (RFC) and the manufacture identification number (MIN), as shown in Figure 1. 4.2 Ride property code (RPC) The ride property code (RPC) is the first part of the ride identification number, consisting of two fields. The first field indicates whether it is a special equipment, consisting of a single letter. Those falling within the scope of special equipment supervision are indicated by T, while others are indicated by F. The second field indicates the device’s design acceleration zone, consisting of a single digit. The device’s design acceleration zone is determined according to GB 8408. Devices with design acceleration zones of Zone 1, Zone 2, Zone 3, Zone 4 and Zone 5 are indicated by 1, 2, 3, 4 and 5, respectively. 4.3 Ride feature code (RFC) The ride feature code (RFC) is the second part of the ride identification number, consisting of three fields. The first field indicates the primary motion form, consisting of a single letter. Slide is indicated by H, rotation is indicated by X, lift is indicated by S, combination is indicated by Z, and others are indicated by Q. The second field indicates the device type with structural and motion characteristics, consisting of two Arabic numerals. Table 1 lists the device category and type code. The third field indicates the device’s main parameter, consisting of letters and corresponding technical parameter values. Table 1 lists the main parameters corresponding to the device category and type code. Device height is indicated by S, in meters (m); number of passengers per cabin is indicated by X, in persons; dip angle is indicated by Q, in degrees (°); swing diameter is indicated by D, in meters (m); running height is indicated by H, in meters (m); number of passengers is indicated by N, in persons; running speed is indicated by V, in meters per second (m/s); orbit height is indicated by G, in meters (m); number of passengers per vehicle (train) is indicated by Y, in persons; slide length is indicated by L, in meters (m). Technical parameter values are integers or decimals with one decimal place. The third field does not apply to devices of type codes 46 to 52. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
