HOME   Cart(9)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 20049-2025 PDF English

US$155.00 · In stock · Download in 9 seconds
GB/T 20049-2025: Ride identification number
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 20049: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 20049-2025English155 Add to Cart 0-9 seconds. Auto-delivery Ride identification number Valid
GB/T 20049-2006English70 Add to Cart 0-9 seconds. Auto-delivery Amusement devices code name Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 20049-2025
      

Similar standards

GB/T 18879   GB/T 20051   GB/T 45275   

GB/T 20049-2025: Ride identification number

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20049-2025
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.200.40 CCS Y 57 GB/T 20049-2025 Replacing GB/T 20049-2006 Ride identification number Issued on: MAY 30, 2025 Implemented on: SEPTEMBER 01, 2025 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Content and composition of ride identification number... 6 4.1 Basic composition of ride identification number... 6 4.2 Ride property code (RPC)... 7 4.3 Ride feature code (RFC)... 7 4.4 Manufacture identification number (MIN)... 10 4.5 Separators... 10 4.6 Determination of ride identification number... 10 5 Marking location of ride identification number... 10 6 Marking method and requirements for ride identification number... 11

Foreword

This document was drafted in accordance with the provisions of GB/T 1.1-2020 “Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents”. This document replaces GB/T 20049-2006 “Amusement devices code name”. Compared to GB/T 20049-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. - MODIFY the scope (see Clause 1 of this document, Clause 1 of the 2006 edition); - DELETE “Amusement devices code name”, “Code name descriptions” and “Code name examples” (see Clauses 2, 3 and 4 of the 2006 edition); - ADD the terms and definitions (see Clause 3 of this document); - ADD the content and composition of ride identification number (see Clause 4 of this document); - ADD the marking location of ride identification number (see Clause 5 of this document); - ADD the marking method and requirements for ride identification number (see Clause 6 of this document). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by and shall be under the jurisdiction of National Technical Committee on Ropeways and Amusement Rides of Standardization Administration of China (SAC/TC 250). Drafting organizations of this document. China Special Equipment Inspection and Research Institute, Huaqiang Fantawild Culture & Technology Group Co., Ltd., Guangxi Zhuang Autonomous Region Special Equipment Inspection and Research Institute, Henan Special Equipment Inspection and Research Institute, Beijing Wiegand Slide Conveying Equipment Co., Ltd., Beijing Shibaolai Amusement Device Co., Ltd., Zhejiang Southern Cultural and Tourism Technology Co., Ltd., Ma’anshan Yuedong Amusement Device Co., Ltd., Lianyungang Yaqiao Machinery Manufacturing Co., Ltd., Zhejiang Chowchow Education Technology Co., Ltd., Chengdu Tailong Amusement Industry Co., Ltd., Guangdong Daxin Amusement Intelligent Technology Co., Ltd., Shijiazhuang Haoyunlai Slide Co., Ltd. Main drafters of this document. Shen Gongtian, Zhang Kun, Zhang Pengfei, Liang Chaohu, Liu Ran, He Shimin, Zhang Yong, Liu Hui, Ye Haibo, Ma Xiaobin, Wang Ride identification number

1 Scope

This document specifies the content and composition, marking location, marking method and requirements for ride identification number. This document applies to passenger-carrying amusement rides, including large-scale amusement rides, small-scale amusement rides, inflatable amusement rides and glass water slides.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 8408 Large-scale amusement device safety code GB/T 20306 Amusement devices terminology GB/T 28622 No power type of amusement devices - Terminology

3 Terms and definitions

For the purpose of this document, the terms and definitions defined in GB 8408, GB/T 20306 and GB/T 28622, as well as the following, apply. 3.1 ride identification number; RIN A code assigned by the amusement ride manufacturer to identify a particular amusement ride. 3.2 ride property code; RPC The first part of the ride identification number (RIN), used to describe the general properties of the amusement ride. 3.3 ride feature code; RFC The second part of the ride identification number (RIN), used to describes the structural and motion characteristics of the amusement ride. 3.4 manufacture identification number; MIN The third part of the ride identification number (RIN), which is the unique manufacturer identifier of the amusement ride.

4 Content and composition of ride identification number

4.1 Basic composition of ride identification number The ride identification number (RIN) consists of three parts. the ride property code (RPC), the ride feature code (RFC) and the manufacture identification number (MIN), as shown in Figure 1. 4.2 Ride property code (RPC) The ride property code (RPC) is the first part of the ride identification number, consisting of two fields. The first field indicates whether it is a special equipment, consisting of a single letter. Those falling within the scope of special equipment supervision are indicated by T, while others are indicated by F. The second field indicates the device’s design acceleration zone, consisting of a single digit. The device’s design acceleration zone is determined according to GB 8408. Devices with design acceleration zones of Zone 1, Zone 2, Zone 3, Zone 4 and Zone 5 are indicated by 1, 2, 3, 4 and 5, respectively. 4.3 Ride feature code (RFC) The ride feature code (RFC) is the second part of the ride identification number, consisting of three fields. The first field indicates the primary motion form, consisting of a single letter. Slide is indicated by H, rotation is indicated by X, lift is indicated by S, combination is indicated by Z, and others are indicated by Q. The second field indicates the device type with structural and motion characteristics, consisting of two Arabic numerals. Table 1 lists the device category and type code. The third field indicates the device’s main parameter, consisting of letters and corresponding technical parameter values. Table 1 lists the main parameters corresponding to the device category and type code. Device height is indicated by S, in meters (m); number of passengers per cabin is indicated by X, in persons; dip angle is indicated by Q, in degrees (°); swing diameter is indicated by D, in meters (m); running height is indicated by H, in meters (m); number of passengers is indicated by N, in persons; running speed is indicated by V, in meters per second (m/s); orbit height is indicated by G, in meters (m); number of passengers per vehicle (train) is indicated by Y, in persons; slide length is indicated by L, in meters (m). Technical parameter values are integers or decimals with one decimal place. The third field does not apply to devices of type codes 46 to 52. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 20049-2025 be delivered?

Answer: The full copy PDF of English version of GB/T 20049-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 20049-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20049-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 20049-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 20049-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20049-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 20049-2025?

A step-by-step guide to download PDF of GB/T 20049-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 20049-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9