|
Std ID |
Description (Standard Title) |
|
YS/T 1262-2018
|
Method for chemical analysis of titanium sponge,titanium and titanium alloys -- Determination of multielement content-Inductively coupled plasma atomic emission spectrometry
|
|
YS/T 1263.1-2018
|
Methods for chemical analysis of lithium nickel cobalt aluminum oxide--Part 1: Determination of nickel content. Dimethylglyoxime gravimetric method
|
|
YS/T 1263.2-2018
|
Methods for chemical analysis of lithium nickel cobalt aluminum oxide, Part 2: Determination of cobalt content. Potentiometric titration
|
|
YS/T 1263.3-2018
|
Methods for chemical analysis of lithium nickel cobalt aluminum oxide--Part 3: Determination of lithium content. Flame atomic absorption spectrometric method
|
|
YS/T 1263.4-2018
|
Methods for chemical analysis of lithium nickel cobalt aluminum oxide--Part 4: Determination of aluminum, iron, calcium, magnesium, copper, zinc, silicon, sodium, manganese contents. Inductively coupled plasma atomic emission spectrometry
|
|
YS/T 1264-2018
|
Test method for thermal stability of titanium alloys
|
|
YS/T 1265-2018
|
Rare earth zirconate powders
|
|
YS/T 1266-2018
|
Plates and rods of refractory metals. Test method for creep properties
|
|
YS/T 1267-2018
|
Sintered CuAl intermetallic compound flexible film
|
|
YS/T 1268-2018
|
Nickel-based alloy powder for selective laser melting process
|
|
YS/T 1269-2018
|
Composition and property requirements for metal injection molding materials
|
|
YS/T 1270-2018
|
Yttria stabillized zirconia powders
|
|
YS/T 1271-2018
|
Cemented carbide composite substrate
|
|
YS/T 1272-2018
|
FeAl intermetallic compound porous membrane material
|
|
YS/T 1273-2018
|
Fe-Ni-Al alloy composite plates for railway traffic
|
|
YS/T 1274-2018
|
Bis(2, 4-pentanedionato)palladium(Ⅱ)
|
|
YS/T 1275-2018
|
Bis(2, 4-pentanedionato) platinum(Ⅱ)
|
|
YS/T 1276-2018
|
Tris (2, 4-pentanedionato)rhodium(Ⅲ)
|
|
YS/T 1277-2018
|
Tris(2, 4-pentanedionato) ruthenium(Ⅲ)
|
|
YS/T 1278-2018
|
Tris(2, 4-pentanedionato) iridium
|
|
YS/T 1279-2018
|
Diammine diiodoplatinum
|
|
YS/T 1280-2018
|
Tetraamminepalladium(Ⅱ)sulfate
|
|
YS/T 1281-2018
|
Ethylenediamine sulfate palladium
|
|
YS/T 1282-2018
|
Dihydrogen hexahydroxy platinate
|
|
YS/T 1283-2018
|
Potassium hexachloroplatinate(IV)
|
|
YS/T 1284-2018
|
(2,4-dinitrochlorobenzene)
|
|
YS/T 1286-2018
|
Crude zinc
|
|
YS/T 1287-2018
|
Method for chemical analysis of high purity cadium. Determination of magnesium, aluminum, calium, chromium, iron, nickel, copper, zinc, silver, tin, antimony, lead, bismuth contents. Inductively coupled plasma-mass spectrum method
|
|
YS/T 1288.1-2018
|
Methods for chemical analysis of high purity zinc--Part 1: Determination of magnesium, aluminum, cobalt, iron, nickel, copper, arsenic, silver, cadium, indium, tin, lead, bismuth contents. Inductively coupled plasma-mass spectrum method
|
|
YS/T 1288.2-2018
|
Methods for chemical analysis of high purity zinc--Part 2: Determination of lead, cadium contents. Polarography method
|
|
YS/T 1288.3-2018
|
Methods for chemical analysis of high purity zinc--Part 3: Determination of arsenic content. Hydride generation-atomic fluorescence spectrometry
|
|
YS/T 1288.4-2018
|
Methods for chemical analysis of high purity zinc--Part 4: Determination of trace impurity elements content. Glow discharge mass spectrometry
|
|
YS/T 1289-2018
|
Determination of lanthanum oxide in tungsten-lanthanum alloys. Na2EDTA titration method
|
|
YS/T 1290-2018
|
Determination of silane content in tail gas of polycrystalline silicon production. Gas chromatographic method
|
|
YS/T 201-2018
|
Sheets and bands of precious metals and their alloys
|
|
YS/T 3028-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Heap leaching process
|
|
YS/T 3029-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Floatation process
|
|
YS/T 3030-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Chloridizing roasting
|
|
YS/T 3031-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Carbon-in-pulp process
|
|
YS/T 3032-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Zinc cementation process
|
|
YS/T 3033-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Bio-oxidation process
|
|
YS/T 3034-2018
|
Technical specifications for metal balance of mineral processing and metallurgy of gold. Whole-ore roasting process
|
|
YS/T 37.1-2018
|
Methods for chemical analysis of high pure germanium dioxide -- Determination of chlorine content by silver nitrate turbidimetric method
|
|
YS/T 37.2-2018
|
Methods for chemical analysis of high pure germanium dioxide -- Determination of silicon content by molybdenum blue spectrophotomertic method
|
|
YS/T 37.3-2018
|
Methods for chemical analysis of high pure germanium dioxide -- Determination of arsenic content by graphite furnace atomic absorption spectrometric method
|
|
YS/T 37.4-2018
|
Methods for chemical analysis of high pure germanium dioxide -- Determination of magnesium,aluminum,cobalt,nickel,copper,zinc indium,lead,calcium,iron and arensic content by inductively coupled plasma mass spectrometric method
|
|
YS/T 37.5-2018
|
Methods for chemical analysis of high pure germanium dioxide -- Determination of iron content by graphite furnace atomic absorption spectrometric method
|
|
YS/T 370-2018
|
Preparation method of metallographic samples for precious metals and their alloys
|
|
YS/T 5203-2018
|
(Geotechnical engineering survey chart legend)
|
|
YS/T 5204-2018
|
(Geotechnical engineering site description procedure)
|
|
YS/T 5205-2018
|
(Geotechnical static load test procedure)
|
|
YS/T 5208-2018
|
(12 kV Solid-insulated metal-enclosed switchgear and controlgear)
|
|
YS/T 5209-2018
|
(Wrecker)
|
|
YS/T 5211-2018
|
(Casting cupola soot emission limit)
|
|
YS/T 5213-2018
|
Specification for standard penetration test
|
|
YS/T 5218-2018
|
(Anaerobic adhesive)
|
|
YS/T 5222-2018
|
(Mechanical spraying plaster)
|
|
YS/T 5227-2018
|
(Lime based single layer decorative mortar)
|
|
YS/T 540.1-2018
|
Methods for chemical analysis of vanadium - Part 1: Determination of vanadium content -- Potassium permanganate-ammonium ferrous sulfate titration
|
|
YS/T 540.2-2018
|
Methods for chemical analysis of vanadium - Part 2: Determination of chromium content -- Diphenylcarbazide spectrophtometry
|
|
YS/T 540.3-2018
|
Methods for chemical analysis of vanadium - Part 3: Determination of carbon content -- High frequency combustion infrared absorption method
|
|
YS/T 540.4-2018
|
Methods for chemical analysis of vanadium - Part 4: Determination of iron content -- 1,10-phenanthroline spectrophotometry
|
|
YS/T 540.5-2018
|
Methods for chemical analysis of vanadium - Part 5: Determination of impurity contents -- Inductively coupled plasma atomic emission spectrometry
|
|
YS/T 540.6-2018
|
Methods for chemical analysis of vanadium - Part 6: Determination of silico content -- Molybdenum blue spectrophotometry
|
|
YS/T 540.7-2018
|
Methods for chemical analysis of vanadium - Part 7: Determination of oxygen content - Inert gas fusion -- Infrared method
|
|
YS/T 5433-2018
|
(Yttria stabilized zirconia powder)
|
|
YS/T 584-2018
|
Chromium copper and zirconium copper rod and bar for electrode material
|
|
YS/T 635-2018
|
Brass tube for sanitary ware
|
|
YS/T 649-2018
|
Extruded rod and bar of copper and copper alloys
|
|
YS/T 662-2018
|
Extruded tube of copper and copper alloys
|
|
YS/T 679-2018
|
Test methods for minority carrier diffusion length in extrinsic semiconductors. Surface photovoltage method
|
|
YS/T 699-2018
|
Graphitized cathode carbon block for aluminium electrolysis
|
|
YS/T 79-2018
|
Brazed cemented carbide inserts for cutting tool
|
|
YS/T 3035-2017
|
(Gold mine original rock temperature measurement technical specification)
|
|
YS/T 1208-2018
|
(Non-ferrous metal smelting product coding rules and bar code identification)
|
|
YS/T 1285-2018
|
Safety specification for silver smelting production
|
|
YS/T 1291-2018
|
Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Enriched-oxygen side-blown molten pool smelting furnace)
|
|
YS/T 1292-2018
|
Technical specification for sorting of nonferrous metals from end-of-life vehicles
|
|
YS/T 1293-2018
|
Technical specifications for non-ferrous metal recycling from waste printed-circuit board-Recovery of copper, zinc, lead, tin, gold, silver, palladium
|
|
YS/T 1065.5-2019
|
(Methods for the determination of physical and chemical properties of zeolites - Part 5: Determination of Al3+ content)
|
|
YS/T 1065.6-2019
|
(Methods for detection of physical and chemical properties of zeolites - Part 6: Determination of calcium exchange rate)
|
|
YS/T 1171.11-2019
|
(Methods of chemical analysis of chemical raw materials - Part 11: Determination of bismuth content - Inductively coupled plasma atomic emission spectrometry)
|
|
YS/T 1294-2019
|
(Copper and copper alloy wire blanks for contact wires and strands)
|
|
YS/T 1295-2019
|
(Nickel-coated graphite composite powder)
|
|
YS/T 1296-2019
|
Spherical titanium- -aluminum powder, Draft for approval
|
|
YS/T 1297-2019
|
(Titanium and titanium alloy powder sphericity determination method)
|
|
YS/T 1298-2019
|
(Carbide disc cutter blank)
|
|
YS/T 1299-2019
|
(Cemented carbide composite roll)
|
|
YS/T 1300-2019
|
(Determination of methyldichlorosilane, trimethylchlorosilane and methyltrichlorosilane in chlorosilanes)
|
|
YS/T 1301-2019
|
(Determination of phosphorus oxychloride and phosphorus trichloride in chlorosilanes)
|
|
YS/T 1302-2019
|
(Power battery electrolyte bisfluorosulfonimide lithium salt)
|
|
YS/T 1303-2019
|
(Vanadium sulfate)
|
|
YS/T 1304-2019
|
(Vanadium pentoxide)
|
|
YS/T 1305-2019
|
(Molybdenum tantalum alloy sheet)
|
|
YS/T 1306-2019
|
(Purlin)
|
|
YS/T 1307.1-2019
|
(Nickel-titanium shape memory alloys - Test methods - Part 1 : Tensile test method)
|
|
YS/T 1307.2-2019
|
(Nickel-titanium shape memory alloys - Test methods - Part 2: Bending test method)
|
|
YS/T 1308-2019
|
(Test method for vapor (water) corrosion of zirconium, hafnium and its alloys)
|
|
YS/T 1309-2019
|
(Titanium and titanium alloy coatings)
|
|
YS/T 1310-2019
|
(Barium chloride)
|