|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 1033.2-2010
|
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
|
GB/T 1033.2-2010
|
|
GB/T 1033.3-2010
|
Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pycnometer method
|
GB/T 1033.3-2010
|
|
GB/T 25278-2010
|
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
|
GB/T 25278-2010
|
|
GB/T 26253-2010
|
Determination of water vapour transmission rate for plastics-film and sheeting -- Infrared detection sensor method
|
GB/T 26253-2010
|
|
GB/T 16578.2-2009
|
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method
|
GB/T 16578.2-2009
|
|
GB/T 2406.2-2009
|
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
|
GB/T 2406.2-2009
|
|
GB/T 12006.1-2009
|
Plastics -- Polyamides -- Part 1: Determination of viscosity number
|
GB/T 12006.1-2009
|
|
GB/T 12006.2-2009
|
Plastic polyamide -- Part 2: Determination of moisture
|
GB/T 12006.2-2009
|
|
GB/T 12008.1-2009
|
Plastics -- Polyether polyols -- Part 1: Designation system
|
GB/T 12008.1-2009
|
|
GB/T 12008.3-2009
|
Plastics -- Polyether polyols -- Part 3: Determination of hydroxyl number
|
GB/T 12008.3-2009
|
|
GB/T 12008.4-2009
|
Plastics -- Polyether polyols -- Part 4: Determination of sodium and potassium
|
GB/T 12008.4-2009
|
|
GB/T 12009.3-2009
|
Plastics -- Polyethylene polyphenol isocyanate -- Part 3: Determination of viscosity
|
GB/T 12009.3-2009
|
|
GB/T 15596-2009
|
Plastics -- Determination of changes in colour and variation in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
GB/T 15596-2009
|
|
GB/T 19466.6-2009
|
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
GB/T 19466.6-2009
|
|
GB/T 24127-2009
|
Testing method for determining algal resistance of plastics
|
GB/T 24127-2009
|
|
GB/T 24128-2009
|
Method for testing resistance of plastics to mold
|
GB/T 24128-2009
|
|
GB/T 24148.1-2009
|
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system
|
GB/T 24148.1-2009
|
|
GB/T 24148.2-2009
|
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 24148.2-2009
|
|
GB/T 24148.4-2009
|
Plastics -- Unsaturated polyester resin -- Part 4: Determination of viscosity
|
GB/T 24148.4-2009
|
|
GB/T 24148.6-2009
|
Plastics -- Unsaturated-polyester resins -- Part 6: Determination of reactivity at 130 Celsius
|
GB/T 24148.6-2009
|
|
GB/T 24282-2009
|
Plastics -- Determination of xylene-soluble matter in polypropylene
|
GB/T 24282-2009
|
|
GB/T 24396-2009
|
Test Method of Adsorption Resin for Food Industrial Use
|
GB/T 24396-2009
|
|
GB/T 8813-2008
|
Rigid cellular plastics -- Determination of compression properties
|
GB/T 8813-2008
|
|
GB/T 14486-2008
|
Dimensional tolerances for moulded plastic parts
|
GB/T 14486-2008
|
|
GB/T 1844.2-2008
|
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
|
GB/T 1844.2-2008
|
|
GB/T 1844.3-2008
|
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
|
GB/T 1844.3-2008
|
|
GB/T 2406.1-2008
|
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance
|
GB/T 2406.1-2008
|
|
GB/T 2408-2008
|
Plastics -- Determination of burning characteristics -- Horizontal and vertical test [Including 2018XG1]
|
GB/T 2408-2008
|
|
GB/T 2411-2008
|
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (shore hardness)
|
GB/T 2411-2008
|
|
GB/T 9341-2008
|
Plastics -- Determination of flexural properties
|
GB/T 9341-2008
|
|
GB/T 11546.1-2008
|
Plastic -- Determination of creep behaviour -- Part 1: Tensile creep
|
GB/T 11546.1-2008
|
|
GB/T 11991-2008
|
Determination of reversible swelling of exchange resins
|
GB/T 11991-2008
|
|
GB/T 11997-2008
|
Plastic -- Multipurpose test specimens
|
GB/T 11997-2008
|
|
GB/T 12001.1-2008
|
Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications
|
GB/T 12001.1-2008
|
|
GB/T 12001.2-2008
|
Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 12001.2-2008
|
|
GB/T 12003-2008
|
Unplasticized polyvinyl chloride (PVC-U) windows -- Determination of dimensions
|
GB/T 12003-2008
|
|
GB/T 12010.1-2008
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
|
GB/T 12010.1-2008
|
|
GB/T 1404.1-2008
|
Plastics -- Phenolic powder moulding compounds -- Part 1: Designation system and basis for specifications
|
GB/T 1404.1-2008
|
|
GB/T 1404.2-2008
|
Plastics -- Phenolic powder moulding compounds -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 1404.2-2008
|
|
GB/T 14216-2008
|
Plastics -- Film and sheeting -- Determination of wetting tension
|
GB/T 14216-2008
|
|
GB/T 14484-2008
|
Plastics -- Determination of bearing strength
|
GB/T 14484-2008
|
|
GB/T 15223-2008
|
Plastics -- Liquid resins -- Determination of density by the pycnometer method
|
GB/T 15223-2008
|
|
GB/T 1630.1-2008
|
Plastics -- Epoxy resins -- Part 1: Designation
|
GB/T 1630.1-2008
|
|
GB/T 1631-2008
|
Designation system and basis for specifications of ion exchange resins
|
GB/T 1631-2008
|
|
GB/T 1632.1-2008
|
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
|
GB/T 1632.1-2008
|
|
GB/T 1632.5-2008
|
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
|
GB/T 1632.5-2008
|
|
GB/T 1636-2008
|
Plastics -- Determination of apparent density material that can be poured from a specified funnel
|
GB/T 1636-2008
|
|
GB/T 16578.1-2008
|
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method
|
GB/T 16578.1-2008
|
|
GB/T 16582-2008
|
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
GB/T 16582-2008
|
|
GB/T 1842-2008
|
Plastics -- Test method for environmental stress-cracking of polyethylene
|
GB/T 1842-2008
|
|
GB/T 1844.1-2008
|
Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics
|
GB/T 1844.1-2008
|
|
GB/T 18964.1-2008
|
Plastics -- Impact-resistant Polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 18964.1-2008
|
|
GB/T 2035-2008
|
Terms and definitions for plastics
|
GB/T 2035-2008
|
|
GB/T 20417.1-2008
|
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 20417.1-2008
|
|
GB/T 21333-2008
|
Cellular plastics, rigid -- Test methods for self-skinned, high-density materials
|
GB/T 21333-2008
|
|
GB/T 21460.1-2008
|
Plastics -- Styrene-acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 21460.1-2008
|
|
GB/T 21461.1-2008
|
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 21461.1-2008
|
|
GB/T 21461.2-2008
|
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 21461.2-2008
|
|
GB/T 22047-2008
|
Plastics -- Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
|
GB/T 22047-2008
|
|
GB/T 22271.1-2008
|
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 22271.1-2008
|
|
GB/T 22271.2-2008
|
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 22271.2-2008
|
|
GB/T 22295-2008
|
Standard test method for color of transparent liquids (Gardner color scale)
|
GB/T 22295-2008
|
|
GB/T 22312-2008
|
Plastics -- Polyacrylamide -- Determination for residual acrylamide
|
GB/T 22312-2008
|
|
GB/T 22313-2008
|
Plastics -- Polyols for use in the production of polyurethan -- Determination of water content
|
GB/T 22313-2008
|
|
GB/T 22314-2008
|
Plastics -- Polyacrylamide -- Determination for residual acrylamide
|
GB/T 22314-2008
|
|
GB/T 1033.1-2008
|
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
|
GB/T 1033.1-2008
|
|
GB/T 2407-2008
|
Plastics -- Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
|
GB/T 2407-2008
|
|
GB/T 2410-2008
|
Determination of the Luminous Transmittance and Haze of Transparent Plastics
|
GB/T 2410-2008
|
|
GB/T 2412-2008
|
Plastics -- Polypropylene (PP) and propylene copolymer thermoplastics -- Determination of isotactic index
|
GB/T 2412-2008
|
|
GB/T 1034-2008
|
Plastics -- Determination of water absorption
|
GB/T 1034-2008
|
|
GB/T 2547-2008
|
Plastic resins -- Sampling
|
GB/T 2547-2008
|
|
GB/T 1036-2008
|
Test method for coefficient of linear thermal expansion of plastics between 30 Celsius and 30 Celsius with a vitreous silica dilatometer
|
GB/T 1036-2008
|
|
GB/T 1041-2008
|
Plastics -- Determination of compressive properties
|
GB/T 1041-2008
|
|
GB/T 2895-2008
|
Plastics -- Polyester resin -- Determination of partial acid value and total acid value
|
GB/T 2895-2008
|
|
GB/T 3398.1-2008
|
Plastics -- Determination of hardness -- Part 1: Ball indentation method
|
GB/T 3398.1-2008
|
|
GB/T 3398.2-2008
|
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
|
GB/T 3398.2-2008
|
|
GB/T 4610-2008
|
Plastics -- Determination of ignition temperature using a hot-air furnace
|
GB/T 4610-2008
|
|
GB/T 4616-2008
|
Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
|
GB/T 4616-2008
|
|
GB/T 5470-2008
|
Plastics -- Determination of the brittleness temperature by impact
|
GB/T 5470-2008
|
|
GB/T 5471-2008
|
Plastics -- Compression moulding of test specimens of thermosetting materials
|
GB/T 5471-2008
|
|
GB/T 5478-2008
|
Plastics -- Test method for wear by rolling
|
GB/T 5478-2008
|
|
GB/T 5757-2008
|
Determination of moisture holding capacity of ion exchange resins
|
GB/T 5757-2008
|
|
GB/T 6344-2008
|
Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break
|
GB/T 6344-2008
|
|
GB/T 6669-2008
|
Flexible cellular polymeric materials -- Determination of compression set
|
GB/T 6669-2008
|
|
GB/T 6670-2008
|
Flexible cellular polymeric materials -- Determination of resilience by ball rebound
|
GB/T 6670-2008
|
|
GB/T 7141-2008
|
Plastics -- Methods of heat aging
|
GB/T 7141-2008
|
|
GB/T 8144-2008
|
Determination of exchange capacity of cation exchange resin
|
GB/T 8144-2008
|
|
GB/T 8323.1-2008
|
Plastic -- Smoke generation -- Part 1: Guidance on optical-density testing
|
GB/T 8323.1-2008
|
|
GB/T 8323.2-2008
|
Plastic - Smoke generation - Part 2: Determination of optical density by a single-chamber test
|
GB/T 8323.2-2008
|
|
GB/T 8324-2008
|
Plastics -- Determination of bulk factor of moulding materials
|
GB/T 8324-2008
|
|
GB/T 8330-2008
|
Determination of specific gravity of ion exchange resins in wet state
|
GB/T 8330-2008
|
|
GB/T 8331-2008
|
Determination of bulk density of ion exchange resins in wet state
|
GB/T 8331-2008
|
|
GB/T 8332-2008
|
Test method for flammability of cellular plastic -- Horizonal burning method
|
GB/T 8332-2008
|
|
GB/T 8333-2008
|
Test method for flammability of rigid cellular plastic -- Vertical burning method
|
GB/T 8333-2008
|
|
GB/T 8661-2008
|
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
|
GB/T 8661-2008
|
|
GB/T 8811-2008
|
Test method for dimensional stability of rigid cellular plastics
|
GB/T 8811-2008
|
|
GB/T 9343-2008
|
Test method for flammability of plastics -- Determination of flash-ignition temperature and self-ignition temperature
|
GB/T 9343-2008
|
|
GB/T 9352-2008
|
Plastic -- Compression moulding of test specimens of thermoplastic materials
|
GB/T 9352-2008
|
|
GB/T 9639.1-2008
|
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods
|
GB/T 9639.1-2008
|
|
GB/T 9640-2008
|
Flexible and rigid cellular polymeric materials -- Accelerated ageing tests
|
GB/T 9640-2008
|