|
Std ID |
Description (Standard Title) |
|
SY/T 6302-2019
|
(Test method for fracturing proppant conductivity)
|
|
SY/T 6526-2019
|
(Method for measuring dynamic reaction rate of hydrochloric acid and carbonate rock)
|
|
SY/T 6645-2019
|
(Code for design and completion of injection and production well completion engineering of oil and gas reservoir type underground gas storage)
|
|
SY/T 7455-2019
|
(Viscosity reducing process specification for heavy oil well)
|
|
SY/T 5587.12-2018
|
Codes for conventional workover job. Part 12: Releasing and fishing
|
|
SY/T 5587.5-2018
|
Codes for conventional workover job - Part 5: Wellbore preparation for downhole operation
|
|
SY/T 5792-2018
|
(Side drilling construction operation and completion technology requirements)
|
|
SY/T 5849-2018
|
The evaluation method for removing plugging by chemicals in production and injection well
|
|
SY/T 6130-2018
|
The parameter test and injection profile explaination method for steam injection well
|
|
SY/T 6487-2018
|
Recommended practice for liquid carbon dioxide huff and puff
|
|
SY/T 6644-2018
|
Technical specification for design and downhole operation of continuous flow gas lift installations using injection pressure operated valves
|
|
SY/T 6989-2018
|
Technical specification for snubbing operation
|
|
SY/T 5695-2017
|
Viscosity reducers for drilling fluid. Amphoteric zwitterionic polymers
|
|
SY/T 5744-2017
|
The pressure testing procedures in the annulus of pumping wells
|
|
SY/T 6124-2017
|
Practice for water drainage and gas production by gas lift
|
|
SY/T 6126-2017
|
Statistics method of production indication used in the pumping unit, electric submersible centrifugal pump and progressive cavity pump
|
|
SY/T 6127-2017
|
Specification of data collection items for downhole operation in oil，gas，water wells
|
|
SY/T 6258-2017
|
Design calculations for sucker rod pumping systems(conventional units)
|
|
SY/T 6485-2017
|
Specification for oil production engineering design in polymer flooding
|
|
SY/T 6486-2017
|
Process specification of antiswelling and preventing fine-migration in acid treatment of injection wells
|
|
SY/T 6525-2017
|
Recommended practice for water drainage and gas production by foaming method
|
|
SY/T 6570-2017
|
Regulations drafted for the lift technology design of oil wells
|
|
SY/T 6646-2017
|
Well abandonment and inactive well practices
|
|
SY/T 5873-2017
|
Practice for design and execution of sucker rod pumping system
|
|
SY/T 0600-2016
|
Prediction methods for scaling tendency in oil-field water
|
|
SY/T 0601-2016
|
Determination of emulsified oil and soluble oil in produced water
|
|
SY/T 5107-2016
|
The evaluation measurement for properties of water-based fracturing fluid
|
|
SY/T 5183-2016
|
(Evaluation Method of Sand Prevention Effect of Oil Well)
|
|
SY/T 5185-2016
|
Evaluation methods of water-based carrying fluid for gravel packing sand control
|
|
SY/T 5252-2016
|
Specification for measurement of rocf natural gamma spectrometry in laboratory
|
|
SY/T 5274-2016
|
Technical requirements for resin coated sand
|
|
SY/T 5289-2016
|
Fracturing design, treatment and post-frac effect evaluation methodsof oil, gas and injection well
|
|
SY/T 5337-2016
|
Technical requirements for gravel packing tools
|
|
SY/T 5587.11-2016
|
Codes for conventional workover job. Part 11-Milling operation of packer and bridge plug
|
|
SY/T 5627-2016
|
Technical requirements for sliding sleeve and ball deliver
|
|
SY/T 5733-2016
|
Method of well completion and layered testing and adjustment for zonal injection wells
|
|
SY/T 5753-2016
|
The performance evaluation method of surfactants for oil well acidizing and water well stimulation
|
|
SY/T 5754-2016
|
Methods for evaluating performances of mutual solvent in acidizing
|
|
SY/T 5755-2016
|
The performance evaluation method of cleanup additive for fracturing and acidizing
|
|
SY/T 5971-2016
|
The performance evaluation method of clay stabilizer for fracturing, acidizing and water injection in oil and gas fields
|
|
SY/T 6213-2016
|
Fluoroboric acid for acidizing
|
|
SY/T 6214-2016
|
Gelling agent for viscous acid
|
|
SY/T 6265-2016
|
(Diagnosis Method of Pumping Well Condition)
|
|
SY/T 6464-2016
|
(Horizontal well completion technology requirements)
|
|
SY/T 6596-2016
|
The technical specification of produced-water injection in gas field
|
|
SY/T 6690-2016
|
Specification for well-control technology of downhole operation
|
|
SY/T 7305-2016
|
(Technical Specification for Continuous Tubing Extinguishing and Air Drainage)
|
|
SY/T 7329-2016
|
The measuration of organochlorine content in oil field chemicals
|
|
SY/T 5108-2014
|
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
|
SY/T 5273-2014
|
Technical specifications and evaluating methods of corrosion-inhibitors for oilfield produced water
|
|
SY/T 5275-2014
|
Distributor for water-injection
|
|
SY/T 5825-2014
|
Procedures of temperature test with down-hole electronic thermometers
|
|
SY/T 5834-2014
|
Performance specifications and measuring methods of low-solid killing fluid
|
|
SY/T 5952-2014
|
Legends of downhole strings and tools for production and injection well
|
|
SY/T 6084-2014
|
Use and maintain for ground drive progressing cavity pumps
|
|
SY/T 6987-2014
|
The method of jam releasing and sand washing on horizontal wells
|
|
SY/T 6988-2014
|
Technical method for profile modification with foam in steam huff and puff well
|
|
SY/T 6989-2014
|
Operation method for snubbing workover for oil and water well
|
|
SY/T 6990-2014
|
Techniques for the sidetracking well completion with expandable tubular
|
|
SY/T 5587.14-2013
|
Codes for conventional workover job. Part 14: Cementing plug and drilling out
|
|
SY/T 5587.3-2013
|
Codes for conventional workover job. Part 3: Killing well, displaced flow and induced flow
|
|
SY/T 5700-2013
|
The operating specifications for conventional beam-pumping unit
|
|
SY/T 5827-2013
|
Process of releasing and fishing
|
|
SY/T 6118-2013
|
The technical specifications for water processing system operation of thermal recovery steam generator
|
|
SY/T 6120-2013
|
Specification for blowout prevention during down-hole operations in oil well
|
|
SY/T 6125-2013
|
Technology procedures for gas well testing, gas producing and performance monitoring
|
|
SY/T 6296-2013
|
Determination of the strength of gels used for oil production. Test method on rheological parameters
|
|
SY/T 6304-2013
|
Technical standard of thermal packer and expansion joint
|
|
SY/T 6334-2013
|
Acidizing designment, treatment and evaluation for production well and water injection well
|
|
SY/T 6484-2013
|
Recommended practices for operation, maintenance, surveillance and troubleshooting of gas-lift Installations
|
|
SY/T 0531-2012
|
Determination of particle size of suspended solid in oilfield injecting wate. Resistance induction method
|
|
SY/T 0532-2012
|
Analysis method of the bacteria for oilfield injecting water. Disappearing dilution method
|
|
SY/T 5275.3-2012
|
Filling with water dispenser water dispenser hoard -set
|
|
SY/T 5275-2012
|
Eccentric injection tools
|
|
SY/T 5340-2012
|
Practice for gravel pack of sand control
|
|
SY/T 5587.10-2012
|
Code for conventional workover job. Part 10: Hydroblasting perforation
|
|
SY/T 5588-2012
|
Profile modification technology and result evaluation in water well
|
|
SY/T 5807-2012
|
Technology method for hydraulic piston pump trip operation and test
|
|
SY/T 5821-2012
|
Water shutoff technology with organic plugging agent for carbonate reservoir
|
|
SY/T 5826-2012
|
Maintenance and service procedure for hydraulic piston pump
|
|
SY/T 5847-2012
|
The drawing and application method of dynamic control chart for rod-pumping well
|
|
SY/T 5863-2012
|
The procedure for the ESP pulling out and installation
|
|
SY/T 5864-2012
|
Dynamometer card test of the rod-pumping well
|
|
SY/T 5874-2012
|
Evaluation method on oil well water plugging
|
|
SY/T 5886-2012
|
Methods for evaluating performances of retarded acid
|
|
SY/T 5906-2012
|
The method for plotting chart on pressure-loss curve through water nozzle
|
|
SY/T 5923-2012
|
Operation method of water plugging in production well. Process technologies of water plugging and profile control with sodium silicate and calcium chloride
|
|
SY/T 6081-2012
|
Specifications for oil production engineering project design
|
|
SY/T 6085-2012
|
Screw foam generator for oil and gas field
|
|
SY/T 6086-2012
|
Technical standard for operation of thermal recovery steam generator
|
|
SY/T 6087-2012
|
Process of releasing and fishing for the submersible electric pump
|
|
SY/T 6089-2012
|
Operation procedure for steam huff and puff
|
|
SY/T 6119-2012
|
Instrument for system condition of pumping well
|
|
SY/T 6450-2012
|
Recommended practice for repair, testing and setting gas lift valves
|
|
SY/T 6463-2012
|
Specifications for gas production engineering project design
|
|
SY/T 6571-2012
|
Evaluation method for performance of ferric ion stabilizing agents in acidizing
|
|
SY/T 6846-2012
|
Horizontal well completion technology with stage cementing
|
|
SY/T 6847-2012
|
Technical criterion for igneous reservoir fracturing
|
|
SY/T 6887-2012
|
Design and treatment methods of foam diversion in acidizing
|
|
SY/T 6888-2012
|
Microbial flooding technical specifications
|