|
Std ID |
Description (Standard Title) |
|
QC/T 1145-2021
|
Technical specifications of diesel/methanol dual-fuel engine
|
|
QC/T 29061-2013
|
Engineering specification for auto engine wax thermostat
|
|
QC/T 526-2013
|
Automobile engine. Engineering approval evaluation program
|
|
QC/T 833-2010
|
Technical specifications of pressure relief valve for automobile air conditioning system
|
|
QC/T 834-2010
|
Variable displacement swash plate type compressor assembly for automobile air conditioning
|
|
QC/T 835-2010
|
Fixed displacement compressor assembly with double headed swash plate for automobile air conditioning system
|
|
QC/T 812-2009
|
Specifications and test methods for oil separator for crankcase ventilation of diesel engine
|
|
QC/T 637-2000
|
Automotive engine crankshaft bending fatigue strength test method
|
|
QC/T 526-1999
|
(Automotive engine test procedures stereotypes)
|
|
QC/T 901-1998
|
(Automotive engine products quality inspection and assessment methods)
|
|
QC/T 1174-2022
|
High voltage fuse for electric vehicles
|
|
QC/T 1175-2022
|
High voltage contactor for electric vehicles
|
|
QC/T 1156-2021
|
Recycling of traction battery used in electric vehicle - Specifications for secondary cell disassembly
|
|
QC/T 938-2013
|
The test specification of protection for pedestrians in the events of collisions
|
|
QC/T 843-2011
|
General specifications for limousine
|
|
QC/T 766-2006
|
The escape hatch of bus
|
|
QC/T 571-1999
|
(Car cleanliness for the work of a noun, the term)
|
|
QC/T 572-1999
|
Directives for motor vehicle cleaness-Measuring method
|
|
QC/T 573-1999
|
Car cleanliness working guideline - People, objects and environments
|
|
QC/T 574-1999
|
(Car cleanliness for the work of the sampling rules)
|
|
QC/T 575-1999
|
Work guide for automobile cleanness - Analysis method for impurity
|
|
QC 244-1997
|
(Car seat belts dynamic performance requirements and test methods)
|
|
QC/T 57-1993
|
(Constant speed car interior noise measurement methods)
|
|
QC/T 58-1993
|
(Vehicle acceleration with the vehicle noise measurement method)
|
|
QC/T 796-2008
|
Automobile fuel consumption labels
|
|
QC/T 625-1999
|
(Automotive Coating and chemical treatment layer)
|
|
QC/T 1185-2023
|
(Remanufacturing of auto parts - Specifications for thermal spray repair process)
|
|
QC/T 721-2013
|
Non-electrolytically applied zinc flake coatings for automobile
|
|
QC/T 275-2008
|
Metallographic examination of piston with ringcarrier for automotive engines
|
|
QC/T 274-1999
|
(Automotive leaf spring peening procedures)
|
|
QC/T 275-1999
|
(Automotive engine piston ring wear and metallurgical standard inserts)
|
|
QC/T 276-1999
|
(Car parts heat treatment hardness specification)
|
|
QC/T 502-1999
|
(Auto parts induction hardening metallurgical test)
|
|
QC/T 29018-1991
|
Metallographic test for carbonitriding gear of automobile
|
|
QCN 29018-1991
|
(Car carbonitriding gear metallography)
|
|
QC/T 942-2021
|
Test methods of hexavalent chromium in automotive materials
|
|
QC/T 794-2020
|
Internal-combustion engine industry filter paper
|
|
QC/T 1000.1-2015
|
Performance requirements and test methods of nonwoven on automotive filter - Part 1: Non-woven of filters for passenger compartment
|
|
QC/T 1000.2-2015
|
Performance requirements and test methods of nonwoven on automotive filter - Part 2: Non-woven of filters for air filter
|
|
QC/T 941-2013
|
Test Method for Mercury in Automobiles Materials
|
|
QC/T 942-2013
|
Test methods of hexavalent chromium in automobiles materials
|
|
QC/T 943-2013
|
Test methods of lead and cadmium in automobiles materials
|
|
QC/T 944-2013
|
The methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials
|
|
QC/T 79.1-2008
|
Road vehicles. Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles. Part 1: Dimensions
|
|
QC/T 676-2001
|
Auto Body roll profiles, coated roll profile technical conditions
|
|
QC/T 272-1999
|
(Automotive aluminum castings)
|
|
QC/T 273-1999
|
(Automotive zinc alloy, aluminum alloy, copper alloy die castings)
|
|
QC/T 236-1997
|
Test method for material performance of automotive interior decorations
|
|
QC/T 220-1996
|
(Automotive fusible wire)
|
|
QC/T 79-1993
|
(Automotive Brake System Spiral)
|
|
QC/T 80-1993
|
(Automotive Brake System nylon tube)
|
|
QC/T 15-1992
|
General test method for automobile plastic products
|
|
QC/T 29089-1992
|
(Car dashboard skin softening)
|
|
QC/T 1224-2025
|
Method for judging spring effect of commercial vehicle equipped with air suspension
|
|
QC/T 266-2025
|
General principles of general tolerances for automotive parts
|
|
QC/T 272-2025
|
Technical specifications of aluminum alloy castings for automobiles
|
|
QC/T 273-2025
|
Technical specifications of aluminum-alloy die casting for automobiles
|
|
QC/T 625-2024
|
Metallic coatings and conversion coatings for automobile
|
|
QC/T 1183-2023
|
(Automotive Aerodynamics Terms and Definitions)
|
|
QC/T 265-2023
|
Coding rules of automobile part and component
|
|
QC/T 267-2023
|
(Limit Deviation of Automobile Cutting Parts without Tolerance Dimensions)
|
|
QC/T 268-2023
|
Permissible automobile cold stamping variations in dimensions without tolerance indication
|
|
QC/T 269-2023
|
(Limit Deviation of Dimensions Without Tolerance Note for Automobile Casting Parts)
|
|
QC/T 270-2023
|
Permissible variations in dimensions without tolerance indication for steel die forgings of automobile made by vertical press forging process
|
|
QC/T 29017-2023
|
(Limit deviations of untolerated dimensions for automotive molded plastic parts)
|
|
QC/T 29087-2023
|
Permissible welding variation in dimensions without tolerance indication
|
|
QC/T 1157-2022
|
Method of calculating comprehensive energy consumption for unit output of automobile products
|
|
QC/T 1158-2022
|
Method of calculating comprehensive water consumption for unit output of automobile products
|
|
QC/T 1119-2019
|
(Automobile safety glass terminology)
|
|
QC/T 1-2017
|
General requirements for automotive product drawing
|
|
QC/T 18-2017
|
Terminology for automotive product drawing and design document
|
|
QC/T 2-2017
|
Formats of Automotive Product Drawing
|
|
QC/T 3-2017
|
Completeness of Automotive Product Drawing and Design Document
|
|
QC/T 4-2017
|
Adoption and Changing Rules of Automotive Product Drawing and Design Document
|
|
QC/T 5-2017
|
Standardization examination of automotive product drawing and design document
|
|
QC/T 966-2014
|
Coating technical conditions for automotive plastic parts
|
|
QC/T 625-2013
|
Metallic coatings and conversion coatings for automobile
|
|
QC/T 894-2011
|
On-board measurement methods for emissions from heavy-duty hybrid electric vehicles
|
|
QC/T 760-2006
|
General specifications for four wheeled all-terrain vehicles
|
|
QC/T 728-2005
|
Road vehicle. Test method of exposure to weathering
|
|
QC/T 732-2005
|
Accelerated corrosion testing method for passenger car
|
|
QC/T 265-2004
|
Coding rules of automobile part and component
|
|
QC/T 698.1-2004
|
Vehicle instructions. Part 1: Vehicle registration technology parameter table
|
|
QC/T 646.1-2000
|
The car dust tightness test dust hole method
|
|
QC/T 262-1999
|
Metallographic Test of Car Carburizing Gear
|
|
QC/T 263-1999
|
(60 Degree tooth type outer cone angle inch threaded parts of the system structure size)
|
|
QC/T 265-1999
|
(Automotive parts numbering rules)
|
|
QC/T 266-1999
|
Extreme deviation for undeclared tolerance size of automobile parts - General requirements
|
|
QC/T 267-1999
|
Extreme deviation for undeclared tolerance size of automobile machining parts
|
|
QC/T 268-1999
|
Extreme deviation for undeclared tolerance size of processing parts for automobile cold stamping
|
|
QC/T 269-1999
|
Limit deviation of dimensions of automobile parts without tolerance indicated
|
|
QC/T 270-1999
|
(Automotive steel forged parts dimensions without individual tolerance limit deviations)
|
|
QC/T 271-1999
|
(Minivan rain tightness test methods)
|
|
QC/T 215-1996
|
(Automobile, motorcycle instrument Model methodology)
|
|
QC/T 59-1993
|
(Motor vehicle classification)
|
|
QC/T 29087-1992
|
Limit deviation for undeclared tolerance size of automobile welding processing parts
|
|
QC/T 29104-1992
|
(Special Purpose Vehicle hydraulic system hydraulic oil solids pollution limits)
|
|
QC/T 29105.1-1992
|
Test method for degree of solid pollution on hydraulic oil for hydraulic system of special automobile -Tems and definitions
|
|
QC/T 29105.2-1992
|
Test method for degree of solid pollution on hydraulic oil for hydraulic system of special automobile - Device and device cleaning
|
|
QC/T 29105.3-1992
|
(Special Purpose Vehicle hydraulic system hydraulic oil contamination of the test method solid sampling)
|