|
Std ID |
Description (Standard Title) |
|
GB/T 15107-2013
|
[Including 2018XG] Athletic shoes
|
|
GB/T 151-2014
|
Heat exchanger
|
|
GB/T 15185-2016
|
Flanged iron and copper ball valves
|
|
GB/T 15252-2014
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (shore hardness)
|
|
GB/T 15279-2002
|
The specifications of automatic telephone set
|
|
GB/T 15336-2013
|
Phthalic anhydride
|
|
GB/T 1540-2002
|
Paper and board -- Determination of water absorption -- Cobb method
|
|
GB/T 15478-2015
|
Test methods of the performances for pressure transducer/sensor
|
|
GB/T 15516-1995
|
Air quality - Determination of formaldehyde - Acetylacetone spectrophotometric method
|
|
GB/T 15543-2008
|
Power quality -- Three-phase voltage unbalance
|
|
GB/T 1574-2007
|
Test method for analysis of coal ash
|
|
GB/T 15812.1-2005
|
Catheters other than intravascular catheters -- Part 1: Test methods for common for properties
|
|
GB/T 15856.1-2002
|
Cross recessed pan head drilling screws with tapping screw thread
|
|
GB/T 16157-1996
|
[Including 2017XG] The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
|
|
GB/T 1617-2002
|
Barium chloride for industrial use
|
|
GB/T 16288-2008
|
Marking of plastics products
|
|
GB/T 1634.1-2004
|
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
|
|
GB/T 1634.2-2004
|
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastids, ebonite and long-fibre-reinforced composites
|
|
GB/T 16422.2-1999
|
Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
|
|
GB/T 16422.2-2014
|
Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc sources
|
|
GB/T 16422.4-2014
|
Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
|
|
GB/T 16483-2008
|
Safety Data Sheet for Chemical Products - Content and Order of Sections
|
|
GB/T 16507.4-2013
|
Water-tube boilers -- Part 4: Strength calculation of pressure parts
|
|
GB/T 16555-2008
|
Chemical analysis of refractories containing carbon and silicon carbide or nitride
|
|
GB/T 16604-2008
|
Polyester filament for industry
|
|
GB/T 16632-2008
|
Determination of scale inhibition performance of water treatment agents -- Calcium carbonate precipitation method
|
|
GB/T 1664-1995
|
Plasticizers - Determination of colour
|
|
GB/T 16643-2015
|
Rolling bearings -- Combined needle roller thrust roller bearings -- Boundary dimensions
|
|
GB/T 16659-2008
|
Determination of mercury in coal
|
|
GB/T 16674.1-2004
|
Hexagon bolts with flange -- Small series
|
|
GB/T 16674.1-2016
|
Hexagon bolts with flange -- Small series
|
|
GB/T 16674.2-2016
|
Hexagon bolts with flange -- Fine pitch thread -- Small series
|
|
GB/T 1668-2008
|
Plasticizers -- Determination of acid value and acidity
|
|
GB/T 1676-2008
|
Determining the iodine value of plasticizers
|
|
GB/T 1677-2008
|
Determination the epoxy value of plasticizers
|
|
GB/T 16824.1-2016
|
Hexagon washer head tapping screws
|
|
GB/T 16824.2-2016
|
Hexagon flange head tapping screws
|
|
GB/T 16886.10-2005
|
Biological evaluation of medical devices -- Part 10: Tests for irritation and sensitization
|
|
GB/T 16886.1-2011
|
Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process
|
|
GB/T 16886.12-2005
|
Biological evaluation of medical devices -- Part 12: Sample preparation and reference materials
|
|
GB/T 16886.3-2008
|
Biological evaluation of medical devices -- Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
|
|
GB/T 16886.5-2003
|
Biological evaluation of medical devices -- Part 5: Test for in vitro cytotoxicity
|
|
GB/T 16886.6-2015
|
Biological evaluation of medical devices -- Part 6: Tests for local effects after implantation
|
|
GB/T 1690-2006
|
Liquid test methods vulcanized rubber or thermoplastic rubber resistance
|
|
GB/T 1690-2010
|
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
|
|
GB/T 16903.1-2008
|
Rules for the presentation of graphical symbols for use on signs -- Part 1: Design principles for public information graphical symbols
|
|
GB/T 16935.1-2008
|
Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
|
|
GB/T 16936-2007
|
Earth moving machinery -- Engine test code -- Net power
|
|
GB/T 16938-2008
|
Fasteners -- General requirements for bolts, screws, studs and nuts
|
|
GB/T 17141-1997
|
Soil quality. Determination of lead, cadmium. Graphite furnace atomic absorption spectrophotometry
|
|
GB/T 17143.4-1997
|
Information technology. Open Systems Interconnection. Systems Management. Part 4: Alarm reporting function
|
|
GB/T 17143.7-1997
|
Information technology. Open Systems Interconnection. Systems Management. Part 7: Security alarm reporting function
|
|
GB/T 17200-2008
|
Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)
|
|
GB/T 17213.16-2015
|
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
|
|
GB/T 17213.18-2015
|
Industrial-process control valves -- Part 9: Test procedure for response measurements form step inputs
|
|
GB/T 17213.4-2015
|
Industrial-process control valves -- Part 4: Inspection and routine testing
|
|
GB/T 17213.8-2015
|
Industrial-process control valves -- Part 8-1: Noise considerations -- Laboratory measurement of noise generated by aerodynamic flow through control valves
|
|
GB/T 17241.6-2008
|
Integral cast iron flanges [including MODIFICATION 1]
|
|
GB/T 17283-2014
|
Determination of the water dew point of natural gas -- Cooled surface condensation hygrometers
|
|
GB/T 17370-2015
|
Determination of stead-state thermal transmissivity of a moist building material
|
|
GB/T 17376-2008
|
Animal and vegetable fats and oils -- Preparation of methyl esters of fatty acids
|
|
GB/T 17377-2008
|
Animal and vegetable fats and oils -- Analysis by gas chromatography of methyl esters of fatty acids
|
|
GB/T 17470-2007
|
Glass fiber mats -- Chopped strand and continuous filament mats
|
|
GB/T 1748-1979
|
Method of test for flexibility of putty coatings
|
|
GB/T 17483-1998
|
Test code for the determination of airborne noise level of hydraulic pumps
|
|
GB/T 17491-2011
|
Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
|
|
GB/T 1749-1979
|
Method of test for consistency of pastes and putties
|
|
GB/T 17590-2008
|
Three-piece can with aluminium easy open end
|
|
GB/T 17592-2011
|
Textiles -- Determination of the banned azo colorant
|
|
GB/T 17625.8-2015
|
Electromagnetic compatibility -- Limits -- Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase
|
|
GB/T 17626.11-2008
|
Electromagnetic compatibility -- Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests
|
|
GB/T 17626.3-2006
|
Electromagnetic compatibility -- Testing and measurement techniques -- Radiated, radio-frequency, electromagnetic field immunity test
|
|
GB/T 17626.3-2016
|
Electromagnetic compatibility -- Testing and measurement techniques -- Radiated, radio-frequency, electromagnetic field immunity test
|
|
GB/T 17626.4-2008
|
Electromagnetic compatibility -- Testing and measurement techniques -- Electrical fast transient/burst immunity test
|
|
GB/T 17626.5-2008
|
Electromagnetic compatibility -- Testing and measurement techniques -- Surge immunity test
|
|
GB/T 17626.6-1998
|
Electromagnetic compatibility Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields
|
|
GB/T 17626.6-2008
|
Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields
|
|
GB/T 17644-2008
|
Test method for whiteness and chromaticity of textile fibres
|
|
GB/T 17646-2013
|
Design requirements for small wind turbine
|
|
GB/T 17657-2013
|
Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
|
|
GB/T 1766-2008
|
Paints and varnishes -- Rating schemes of degradation of coats
|
|
GB/T 17664-1999
|
Wood charcoal and test method of wood charcoal
|
|
GB/T 17671-1999
|
Method of testing cements--Determination of strength
|
|
GB/T 17680.11-2008
|
Criteria for emergency planning and preparedness for nuclear power plants -- Part 11: Criteria for the conduct of offsite radiological assessment for emergency response
|
|
GB/T 17680.1-2008
|
Criteria for emergency planning and preparedness for nuclear power plants -- Part 1: The dividing of emergency planning zone
|
|
GB/T 177-1985
|
Test method for strength of hydraulic cement mortar
|
|
GB/T 17758-2010
|
Unitary air conditioners
|
|
GB/T 17795-2008
|
Glass wool thermal insulating products for building
|
|
GB/T 17799.1-1999
|
Electromagnetic compatibility - Generic standards - Immunity for residential, commercial and light-industrial environments
|
|
GB/T 17810-2009
|
Feed grade DL-methionine
|
|
GB/T 18009-1999
|
Palm kernel oil
|
|
GB/T 1804-2000
|
General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
|
|
GB/T 18103-2013
|
Engineered wood flooring
|
|
GB/T 18144-2008
|
Test method for measurement of stress in glass
|
|
GB/T 18148-2015
|
Earth-moving machinery -- Testing method of the compaction performance of rollers and compactors
|
|
GB/T 18173.3-2014
|
Polymer water-proof materials - Part 3: Hydrophilic expansion rubber
|
|
GB/T 18175-2000
|
Determination of corrosion inhibition performance of water treatment agents - Rotation specimen method
|
|
GB/T 18204.1-2000
|
Methods of microbiological examination for air in public places - Determination of aerobic bacterial count
|
|
GB/T 18204.26-2000
|
Methods for determination of formaldehyde in air of public places
|
|
GB/T 18216.8-2015
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -- Equipment for testing, measuring or monitoring of protective measures -- Part 8: Insulation monitoring devices for IT systems
|