|
Std ID |
Description (Standard Title) |
|
GB/T 38074-2019
|
Standard test method for determining the friction and wear properties of manual transmission fluid using a high-frequency -- Linear-oscillation (SRV) test machine
|
|
GB/T 38075-2019
|
Hard petroleum asphalt for pavement
|
|
GB/T 38076-2019
|
Technical guideline on environmental risk assessment and prevention for oil pipelines
|
|
GB/T 38077-2019
|
Marine heaters for heating oil with exhaust gas
|
|
GB/T 38078-2019
|
General specification for filling machine using paper based laminated material
|
|
GB/T 38079-2019
|
[Including 2020XG1] Starch-based plastic shopping bags
|
|
GB/T 38080-2019
|
Technical requirements for safety environment and occupational health in mobile laboratory
|
|
GB/T 38081-2019
|
Specification for level 0 data format of land observation satellite
|
|
GB/T 38082-2019
|
Biodegradable plastic shopping bags
|
|
GB/T 38083-2019
|
Technical specification of efficacy evaluation for degradation of phenol pollutants by biological products
|
|
GB/T 38084-2019
|
Technical specification of efficacy evaluation for degradation of plant cellulose by biological products
|
|
GB/T 38085-2019
|
Technical specification of efficacy evaluation for degradation of aromatic amine pollutants by biological products
|
|
GB/T 38086-2019
|
Determination of metallothionein (MT) in biological samples
|
|
GB/T 38087-2019
|
Paper cup (bowl) forming machine
|
|
GB/T 38088-2019
|
Make-up accessories -- Powder puff
|
|
GB/T 38089-2019
|
Technical specification of efficacy evaluation for degradation of organophosphorous pesticides by biological products
|
|
GB/T 38090-2019
|
Technical requirements of permanent magnets for drive motor of electric vehicle
|
|
GB/T 38091.2-2019
|
Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 2: Use of the control banding approach
|
|
GB/T 38092-2019
|
Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
|
|
GB/T 38093-2019
|
Determination of the high-molecular polymers in β-lactam antibiotics -- Gel chromatography
|
|
GB/T 38094-2019
|
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects
|
|
GB/T 38095-2019
|
Determination of docosahexaenoic acid and eicosapentaenoic acid content -- Gas chromatography
|
|
GB/T 38096-2019
|
Determination of nematicidal activity for microbial antibiotic secondary metabolites -- Immersion method
|
|
GB/T 38097-2019
|
Urban heating -- Prefabricated directly buried insulating pipes and fittings with polyurethane (PUR) foamed-plastics and glass fiber reinforced plastics protect layers
|
|
GB/T 38098-2019
|
Evaluation methodology of disassembly resource productivity rate for waste electrical and electronic product
|
|
GB/T 38099.1-2019
|
Requirements of treatment for waste electrical and electronic product -- Part 1: Small IT and telecommunication equipment
|
|
GB/T 38099.2-2019
|
Requirements of treatment for waste electrical and electronic product -- Part 2: Electrical appliances containing refrigerants
|
|
GB/T 38100-2019
|
Refrigerant blends R407 series
|
|
GB/T 38101-2019
|
Treatment and disposal method for copper-containing sludge
|
|
GB/T 38102-2019
|
Treatment and disposal method for fluorine acid waste liquid in the production of wet process phosphoric acid and phosphate fertilizer
|
|
GB/T 38103-2019
|
Treatment and disposal method for lithium-containing waste materials
|
|
GB/T 38104-2019
|
Technical specification for phosphate tailings treatment and disposal
|
|
GB/T 38105-2019
|
Urban heating -- Steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers
|
|
GB/T 38106-2019
|
Aluminum and aluminum alloy plates and sheets for pressure vessel
|
|
GB/T 38107-2019
|
Paving units for tactile sense approach
|
|
GB/T 38108-2019
|
Test method for determining chlorine capacity of alkaline earth metal-based sorbents at high temperature
|
|
GB/T 38109-2019
|
Application guidance for safety accessories and instruments on pressure equipment
|
|
GB/T 38110-2019
|
Graphical symbols for the technical documentation of coal mining
|
|
GB/T 38111-2019
|
Classification, gradation and designation of basalt fiber
|
|
GB/T 38112-2019
|
Test methods of precast concrete products for tunnel
|
|
GB/T 38113-2019
|
Specification for Internet of things for analytical instruments
|
|
GB/T 38114-2019
|
Nanotechnologies -- Quantitative analysis of the surface oxygen functional groups on graphene materials -- Chemical titration method
|
|
GB/T 38115-2019
|
Informatization management requirement for pallet polling system
|
|
GB/T 38116-2019
|
Low-voltage docking connectors for removable energy storage units
|
|
GB/T 38117-2019
|
Electric vehicles product description -- Emergency rescue
|
|
GB/T 38118-2019
|
General technical specification for mobile laboratory of rapid surface water detection
|
|
GB/T 38119-2019
|
Verification of Shore durometers
|
|
GB/T 38121-2019
|
Protection against lightning -- Thunderstorm warning systems
|
|
GB/T 38122-2019
|
Fingerprint recognition application in public security -- Testing and evaluation methods for verification algorithm performance
|
|
GB/T 38123-2019
|
Guide on inclusion of energy efficiency aspects into electrotechnical product publications
|
|
GB/T 38124-2019
|
Performance test methods for service robots
|
|
GB/T 38125-2019
|
Autosampler for liquid chromatography
|
|
GB/T 38126-2019
|
Information description of product for electronic commerce transaction -- Tea
|
|
GB/T 38127-2019
|
Articulated systems and flexible systems for cable guiding
|
|
GB/T 38129-2019
|
Smart factory -- Safety and security control requirements
|
|
GB/T 38130-2019
|
Platinum jewellery alloys -- Determination of platinum -- Inductively coupled plasma (ICP) spectrometric method using yttrium as internal standard element
|
|
GB/T 38131-2019
|
Acquisition method of datum points for clothing anthropometry
|
|
GB/T 38132-2019
|
Quantitative determination of genetically modified plants by digital PCR method
|
|
GB/T 38133-2019
|
Genetically modified alfalfa detection method by real-time PCR
|
|
GB/T 38134-2019
|
General technical specification for professional clothing
|
|
GB/T 38135-2019
|
Chitosan staple fibers for medical applications
|
|
GB/T 38136-2019
|
Man-made fiber -- Classification of products
|
|
GB/T 38137-2019
|
Guidelines for in vitro screening of nucleic acid aptamers
|
|
GB/T 38138-2019
|
Test methods of fiber grade polycaprolactam (PA6) chip
|
|
GB/T 38139-2019
|
Test methods for liquid raw materials of cement grinding aids -- Gas chromatography
|
|
GB/T 38140-2019
|
Test method for determining capability of cement exposed to seawater
|
|
GB/T 38141-2019
|
Fireworks -- Technical requirements for drying system
|
|
GB/T 38142-2019
|
Resilient, textile and laminate floor coverings -- Castor chair test
|
|
GB/T 38145-2019
|
High content precious metals jewellery alloys -- Determination of gold, platinum and palladium -- Difference method using inductively coupled plasma optical emission spectroscopy
|
|
GB/T 38146.1-2019
|
China automotive test cycle -- Part 1: Light-duty vehicles
|
|
GB/T 38146.2-2019
|
China automotive test cycle -- Part 2: Heavy-duty commercial vehicles
|
|
GB/T 38147-2019
|
Requirements of digital body graphics for clothing
|
|
GB/T 38148-2019
|
Technical specification of efficacy evaluation for degradation of pyrethroid pesticides by biological products
|
|
GB/T 38149-2019
|
Technical specification of efficacy evaluation for degradation of carbamate pesticides by biological products
|
|
GB/T 38150-2019
|
Technical specification of efficacy evaluation for degradation of surfactant by biological products
|
|
GB/T 38151-2019
|
Technical specification of efficacy evaluation for cleaning and decontamination by biological products
|
|
GB/T 38152-2019
|
Terminology for unmanned aircraft system
|
|
GB/T 38153.1-2019
|
Graphic technology -- Laboratory preparation of test prints -- Part 1: Paste inks
|
|
GB/T 38153.2-2019
|
Graphic technology -- Laboratory preparation of test prints -- Part 2: Liquid printing inks
|
|
GB/T 38153.3-2019
|
Graphic technology -- Laboratory preparation of test prints -- Part 3: Screen printing inks
|
|
GB/T 38154-2019
|
Important product traceability -- Core metadata
|
|
GB/T 38155-2019
|
Important product traceability -- Traceability terminology
|
|
GB/T 38156-2019
|
Important product traceability -- General requirements for transaction record
|
|
GB/T 38157-2019
|
Important product traceability -- Specifications for traceability management platform construction
|
|
GB/T 38158-2019
|
Important product traceability -- General requirements for product traceability system
|
|
GB/T 38159-2019
|
Important product traceability -- General requirements for traceability system
|
|
GB/T 38160-2019
|
Stainless steel kitchen equipment
|
|
GB/T 38161-2019
|
Palladium jewellery alloys -- Determination of palladium -- Inductively coupled plasma (ICP) spectrometric method using yttrium as internal standard element
|
|
GB/T 38162-2019
|
High content silver jewellery alloys -- Determination of silver -- Difference method using inductively coupled plasma optical emission spectroscopy
|
|
GB/T 38163-2019
|
Determination of allergenic protein -- LC-MS/MS method
|
|
GB/T 38164-2019
|
Identification of animal ingredient from common livestock and poultry -- Real-time PCR
|
|
GB/T 38165-2019
|
Detection of circulating cell-free DNA concentration in human peripheral blood -- Real-time PCR method based on Alu sequence
|
|
GB/T 38166-2019
|
Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
|
|
GB/T 38167-2019
|
Vitreous and porcelain enamels -- Method of test of self-cleaning properties
|
|
GB/T 38168-2019
|
Vitreous and porcelain enamel finishes -- Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
|
|
GB/T 38169-2019
|
Determination of caulerpin content -- High performance liquid chromatography
|
|
GB/T 38170-2019
|
Agarose-based chromatographic medium
|
|
GB/T 38171-2019
|
Metal chelating chromatographic medium
|
|
GB/T 38172-2019
|
Protein A affinity chromatographic medium
|
|
GB/T 38173-2019
|
Polytetrafluoroethylene staple fibre
|