GB/T 38094-2019 English PDFUS$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38094-2019: Vitreous and porcelain enamels - Low voltage test for detecting and locating defects Status: Valid
Basic dataStandard ID: GB/T 38094-2019 (GB/T38094-2019)Description (Translated English): Vitreous and porcelain enamels - Low voltage test for detecting and locating defects Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y26 Classification of International Standard: 25.220.50 Word Count Estimation: 6,696 Date of Issue: 2019-10-18 Date of Implementation: 2020-05-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38094-2019: Vitreous and porcelain enamels - Low voltage test for detecting and locating defects---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Vitreous and porcelain enamels--Low voltage test for detecting and locating defects ICS 25.220.50 Y26 National Standards of People's Republic of China Enamel products and enamel Low voltage test for defect detection and positioning (ISO 8289.2000, IDT) Published on.2019-10-18 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 8289.2000 "low voltage test for enamel products and enamel defect detection and positioning". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. --- GB/T 8897.2-2013 Primary batteries Part 2. Dimensions and electrical performance requirements (IEC 60086-2.2011, MOD). This standard has made the following editorial changes. --- For ease of use, the unit expression of conductivity is modified to an international common unit with the same value (5.2). This standard is proposed and managed by the China Light Industry Association. This standard was drafted. Donghua University, National Eyeglass Glass Enamel Product Quality Supervision and Inspection Center, Shanghai Glasses Glass Enamel Products Quality supervision and inspection station. The main drafters of this standard. Xu Xiaojian, Dai Qi, Wu Jiaxu, Wang Helan, Zhang Guofan, Zhang Nini, Xu Zhangqian, Gong Miao. Enamel products and enamel Low voltage test for defect detection and positioning1 ScopeThis standard specifies two low-voltage tests for the detection of defects in enamel porcelain and metal substrates. Method A is a rapid test method based on electrical or electroacoustic, which can basically determine the defect position and is suitable for the detection of planar samples; Method B is an optical test method based on color effect, which can accurately determine the position of defects and is suitable for the detection of samples with more complex shapes. Note 1. Select the correct test method for distinguishing the area of conductance enhancement measured by method B and the pinhole extending to the metal substrate measured by two methods. is important. Note 2. The low voltage test is a non-destructive method for the detection of enamel defects, which is completely different from the high voltage test method. The test results of the two test methods Not comparable.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60086-2 Primary Battery Part 2. Specifications (Primarybatteries-Part 2. Specificationsheets)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Defect defect Pores, cracks or blasts from metal substrates. Note. It is difficult to avoid certain defects (such as burning marks) in the production process of enamel products.4 PrincipleMethod A uses electrical or electroacoustic methods to detect defects, and Method B uses optical methods based on color effects to detect defects. by The defects of the enamel article were brought into contact with the conductive solution and tested under low voltage conditions.5 test solution3.0 g ± 0.1 g of sodium nitrite was dissolved in 100 mL of tap water, and 2 drops of liquid detergent were added. If you want to visually observe the defect, that is, using the color effect based method B, add 4mL of phenolphthalein ethanol solution to the solution (to The mass fraction of phenolphthalein is 0.5%). Caution - Use caution when using sodium nitrite and phenolphthalein solutions. If the sample is not coated after the test, in addition to the sodium nitrite solution, alternative test solutions (other water-soluble salts), salts The amount of addition should be controlled to a conductivity of 35 mS/cm ± 3 mS/cm and a pH of 7.5 ± 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38094-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 38094-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38094-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38094-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
