|
Std ID |
Description (Standard Title) |
|
GB/T 9768-2017
|
Rules for application and maintenance of tyres
|
|
GB/T 1094.3-2017
|
Power transformers -- Part 3: Insulation levels, dielectric tests and external clearances in air
|
|
GB/T 11221-1989
|
Radiochemical analysis of caesium-137 in ash of biological samples
|
|
GB/T 1226-2017
|
General pressure gauge
|
|
GB/T 12476.3-2017
|
Electrical apparatus for use in the presence of combustible dust -- Part 3: Classification of areas where combustible dusts are or may be present
|
|
GB/T 12668.8-2017
|
Adjustable speed electrical power drive systems -- Part 8: Specification of voltage on the power interface
|
|
GB/T 12686-2017
|
Glyphosate acid technical material
|
|
GB/T 12757-2017
|
Thermal protective aids for life-saving
|
|
GB/T 13186-2017
|
General specification for airborne Doppler navigation systems
|
|
GB/T 13375-2017
|
Natural uranium hexafluoride specification
|
|
GB/T 13538-2017
|
Electrical penetration assemblies in containment structures for nuclear power plants
|
|
GB/T 13555-2017
|
Copper-clad polyimide film laminates for flexible printed circuits
|
|
GB/T 13556-2017
|
Copper-clad polyester film laminates for flexible printed circuits
|
|
GB/T 13579-2017
|
Tyre shaping and curing press
|
|
GB/T 13667.2-2017
|
Steel bookshelves -- Part 2: Stacked bookshelf
|
|
GB/T 13681.2-2017
|
Hexagon weld nuts with flange
|
|
GB/T 13955-2017
|
Installation and operation of residual current operated protective devices
|
|
GB/T 14190-2017
|
Testing methods of fiber grade polyester (PET) chip
|
|
GB/T 14311-2017
|
Corduroy printed and dyed cotton fabric
|
|
GB/T 143-2017
|
Ripping logs
|
|
GB/T 14464-2017
|
Polyester staple fiber
|
|
GB/T 14531-2017
|
Office furniture -- Tables, chairs and stools for reading
|
|
GB/T 14536.19-2017
|
Automatic electrical controls for household and similar use -- Particular requirements for electrically operated gas valves, including mechanical requirements
|
|
GB/T 14598.300-2017
|
General specification for transformer protection equipment
|
|
GB/T 14715-2017
|
General specification for uninterruptible power supply for information technical equipment
|
|
GB/T 14732-2017
|
Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
|
|
GB/T 14789-2017
|
Raw mink skins
|
|
GB/T 14806-2017
|
A.C. electric ventilating fans and regulators for household and similar purposes
|
|
GB/T 14912-2017
|
Specifications for 1: 500 1: 1000 1: 2000 field digital mapping
|
|
GB/T 11222.1-1989
|
Radiochemical analysis of strontium-90 in ash of biological samples. Extraction chromatography by di-(2-ethylhexyl) phosphate
|
|
GB/T 15022.2-2017
|
Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test
|
|
GB/T 15102-2017
|
Surface decorated fiber board and particleboard with paper impregnated thermosetting resins
|
|
GB/T 5171.22-2017
|
Small-power motors -- Part 22: Test methods for permanent magnet brushless DC motors
|
|
GB/T 5226.31-2017
|
Electrical safety of machinery -- Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems
|
|
GB/T 5226.33-2017
|
Electrical safety of machinery -- Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equipment
|
|
GB/T 5237.1-2017
|
Aluminium alloy extruded profiles for architecture -- Part 1: Mill finish profiles
|
|
GB/T 5237.2-2017
|
Wrought aluminium alloy extruded profiles for architecture -- Part 2: Anodized profiles
|
|
GB/T 5237.3-2017
|
Wrought aluminium alloy extruded profiles for architecture -- Part 3: Electrodeposition coating profiles
|
|
GB/T 5237.4-2017
|
Wrought aluminium alloy extruded profiles for architecture -- Part 4: Powder coating profiles
|
|
GB/T 5237.5-2017
|
Wrought aluminium alloy extruded profiles for architecture -- Part 5: Paint coating profiles
|
|
GB/T 5237.6-2017
|
Wrought aluminium alloy extruded profiles for architecture -- Part 6: Thermal barrier profiles
|
|
GB/T 5318-2017
|
Sintered metal materials (excluding hard metals) without notch impact test piece
|
|
GB/T 5588-2017
|
Technical specification for silver-nickel, silver-iron electrical contacts
|
|
GB/T 5668-2017
|
Rotary tiller
|
|
GB/T 5669-2017
|
Rotary tiller -- Rotary blades and blade holders
|
|
GB/T 6115.2-2017
|
Series capacitors for power systems -- Part 2: Protective equipment for series capacitor banks
|
|
GB/T 6188-2017
|
Hexalobular internal driving feature for bolts and screws
|
|
GB/T 6420-2017
|
Freight trailer series pedigree
|
|
GB/T 6494-2017
|
Measurement method for electrical characteristics of aerospace solar cells
|
|
GB/T 6496-2017
|
Test method of aerospace solar cells calibration
|
|
GB/T 11220.2-1989
|
Determination of uranium in soil--Trialkylphosphine oxide extraction-solid fluorimetry
|
|
GB/T 6829-2017
|
General requirements for residual current operated protective devices
|
|
GB/T 6881.2-2017
|
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for small movable sources in reverberant fields -- Comparison method for a hard-walled test room
|
|
GB/T 7251.3-2017
|
Low-voltage switchgear and controlgear assemblies -- Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
|
|
GB/T 7251.4-2017
|
Low-voltage switchgear and controlgear assemblies -- Part 4: Particular requirements for assemblies for construction sites (ACS)
|
|
GB/T 7289-2017
|
Electric components -- Reliability -- Reference conditions for failure rates and stress models for conversion
|
|
GB/T 7512-2017
|
Valves for liquefied petroleum gas cylinders
|
|
GB/T 7602.4-2017
|
Quantitative determination of T501 oxidation inhibitor content in transformer oil or turbine oil -- Part 4: GC/MS method
|
|
GB/T 7704-2017
|
Non-destructive testing -- Practice for residual stress measurement by X-ray
|
|
GB/T 7723-2017
|
Fixed location electronic weighing instrument
|
|
GB/T 7814-2017
|
Isopropyl alcohol for industrial use
|
|
GB/T 7934-2017
|
Hydraulic two-port slip-in cartridge valves -- Technical requirements
|
|
GB/T 8117.4-2017
|
Rules for steam turbine thermal acceptance test -- Part 4: Method D -- Simplified performance test rules for steam turbine and its thermal cycle
|
|
GB/T 8297-2017
|
Rubber, natural latex concentrate -- Determination of KOH number
|
|
GB/T 8320-2017
|
Copper-tungsten and silver-tungsten electrical contacts
|
|
GB/T 8372-2017
|
Toothpaste
|
|
GB/T 8498-2017
|
Earth-moving machinery -- Basic types -- Identification and terms and definitions
|
|
GB/T 8729-2017
|
Foundry coke
|
|
GB/T 8814-2017
|
Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows
|
|
GB/T 8883-2017
|
Edible wheat starch
|
|
GB/T 8884-2017
|
Edible potato starch
|
|
GB/T 8885-2017
|
Edible corn starch
|
|
GB/T 9253.2-2017
|
Petroleum and natural gas industries -- Threading, gauging and thread inspection of casing, tubing, and line pipe threads
|
|
GB/T 9551-2017
|
Chlorothalonil technical material
|
|
GB/T 9552-2017
|
Chlorothalonil wettable powders
|
|
GB/T 15496-2017
|
Enterprise standards system -- Requirement
|
|
GB/T 15497-2017
|
Enterprise standards system -- Product realization
|
|
GB/T 15498-2017
|
Enterprise standards system -- Fundamental supports
|
|
GB/T 155-2017
|
Defects in logs
|
|
GB/T 15579.9-2017
|
Arc welding equipment -- Part 9: Installation and use
|
|
GB/T 15788-2017
|
Geosynthetics -- Wide-width tensile test
|
|
GB/T 15843.1-2017
|
Information technology -- Security techniques -- Entity authentication -- Part 1: General
|
|
GB/T 15843.2-2017
|
Information technology -- Security techniques -- Entity authentication -- Part 2: Mechanisms using symmetric encipherment algorithms
|
|
GB/T 16160-2017
|
Anthropometric definitions and methods for garment
|
|
GB/T 16296.3-2017
|
Acoustics -- Audiometric test methods -- Part 3: Speech audiometry
|
|
GB/T 16451-2017
|
Natural fatty alcohols
|
|
GB/T 16601.1-2017
|
Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 1: Definitions and general principles
|
|
GB/T 16601.2-2017
|
Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 2: Threshold determination
|
|
GB/T 16886.12-2017
|
Biological evaluation of medical devices -- Part 12: Sample preparation and reference materials
|
|
GB/T 16895.20-2017
|
Low-voltage electrical installations -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
|
|
GB/T 17189-2017
|
Code for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
|
|
GB/T 17213.15-2017
|
Industrial-process control valves -- Part 8-3: Noise considerations -- Control valve aerodynamic noise prediction method
|
|
GB/T 17213.2-2017
|
Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions
|
|
GB/T 17213.7-2017
|
Industrial-process control valves -- Part 7: Control valve data sheet
|
|
GB/T 17215.821-2017
|
Electricity metering equipment ((a.c.) -- Acceptance inspection -- Part 21: Particular requirements for electromechanical meters for active energy (classes 0.5, 1 and 2)
|
|
GB/T 17300-2017
|
Earth-moving machinery -- Access systems
|
|
GB/T 17499-2017
|
Microcomputer controller for household washing machine
|
|
GB/T 17603-2017
|
Standard practice for outdoor exposure testing of photodegradable plastics
|
|
GB/T 17626.10-2017
|
Electromagnetic compatibility -- Testing and measurement techniques -- Damped oscillatory magnetic field immunity test
|
|
GB/T 17626.22-2017
|
Electromagnetic compatibility (EMC) -- Testing and measurement techniques -- Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
|