GB/T 13579-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13579-2017: Tyre shaping and curing press Status: Valid GB/T 13579: Historical versions
Basic dataStandard ID: GB/T 13579-2017 (GB/T13579-2017)Description (Translated English): Tyre shaping and curing press Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G95 Classification of International Standard: 71.120; 83.200 Word Count Estimation: 18,129 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Older Standard (superseded by this standard): GB/T 13579-2008 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 13579-2017: Tyre shaping and curing press---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Tyre shaping and curing press ICS 71.120; 83.200 G95 National Standards of People's Republic of China Replacing GB/T 13579-2008 Tire curing stereotypes 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 models, series and basic parameters 2 4.1 Model 2 4.2 series and the basic parameters 2 5 Requirements 2 5.2 Accuracy requirements 3 5.3 Safety and Environmental Requirements 6 6 test methods 7 6.1 Empty load test 7 6.2 load test 7 6.3 Test Method 7 7 Inspection rules 7 7.1 Test classification 7 7.2 factory inspection 7 7.3 type test 8 8 product logo, packaging, transportation and storage 8 8.1 logo 8 8.2 Packaging 8 8.3 Transportation 9 8.4 Storage 9 Appendix A (Informative) Mechanical vulcanizing machine series and the basic parameters 10 Appendix B (informative) Hydraulic vulcanizing machine series and the basic parameters 12 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 13579-2008 "tire curing press." Compared with GB/T 13579-2008, in addition to editorial changes The main technical changes are as follows. --- Modify the scope of application, not limited to curing vulcanized tire inflatable tires machine, mechanical curing machine is not limited to crank connecting rod (See Chapter 1, Chapter 1 of the.2008 edition); --- Added terms and definitions (see Chapter 3); --- Increase the series of vulcanizing machine and the basic parameters, mechanical vulcanizing machine increased by 6 series, hydraulic vulcanizing machine increased by 10 lines (See Appendix A, Appendix B,.2008 edition of Appendix A, Appendix B); --- Removed the.2008 version of 4.1.2; --- Modify the vulcanizer hot plate temperature uniformity requirements, delete the "working surface temperature not less than 24 points," and testing methods related to the Keep the performance requirements of "working surface temperature fluctuations should not exceed ± 1.5 ℃" (see 5.1.8,.2008 version 4.1.9); --- Modify the.2008 version of 4.1.10, on its basis to add "or program" requirements (see 5.1.9); --- Increasing the accuracy of 2410 ~ 5400 series of product requirements; --- Increasing the level of vulcanizing machine base level requirements (see 5.2.1); --- Improve the hydraulic vulcanizing machine, under the hot plate parallelism requirements (see 5.2.2 in Table 2,.2008 version 4.2.1 in Table 1); --- Increase the vulcanizing machine on the hot plate (or on the steam chamber) under the plane and the lower hot plate (or under the steam chamber) on the plane parallelism, using lead pressure Act, when the clamping force is not less than 80% of the maximum clamping force, the maximum thickness difference of lead is required (see 5.2.3); --- Modify the.2008 version of 4.2.2, on its basis to increase the "hot plate (on the steam chamber) and the next hot plate (under the steam chamber) coaxial Degree "requirement (see 5.2.4); --- Revised version 4.2.4 of.2008, adding the requirement of "verticality of lifting and lowering guide column of tire unloading device" (see 5.2.6); --- Increased after the inflatable device, under the chuck parallelism requirements (see 5.2.11); --- Increased the vulcanizing machine safety performance should be consistent with the provisions of GB 30747 (see 5.3.1); --- Modify the.2008 version of 5.2, delete the "outer surface of the shield the difference between the average temperature and the ambient temperature should not exceed 40 ℃" Seeking, retains the "vulcanizing machine shall not use asbestos-containing materials" requirements (see 5.3.3); --- Removed the.2008 edition of 5.3 ~ 5.10,5.13 ~ 5.20 (GB 30747-2014 has been relevant content); - - -.2008 edition of 5.11 and 5.12 moved to this standard 5.1 (see 5.1.16 and 5.1.17); --- Modify the.2008 version of 6.3, delete "HG/T 3119 is not provided by the manufacturer in accordance with the contents of this standard test"; --- Modify the type test items (see 7.3.2,.2008 version 7.2.1); --- Removed the.2008 version of 8.3.2. This standard proposed by the China Petroleum and Chemical Industry Federation. This standard by the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71) centralized. This standard was drafted unit. Guilin Rubber Machinery Co., Ltd., Fujian Huachen Control Technology Co., Ltd. Yiyang Yishen rubber machinery Co., Ltd., Great Wheel Intelligent Equipment Co., Ltd., Soft Control Co., Ltd., Qingdao University of Science and Technology, Fujian Jian Yang Lung Cheung Technology Development Co., Ltd. Division, Qingdao Double Star Rubber Machinery Co., Ltd., Shandong Fengyuan Tire Manufacturing Co., Ltd., Beijing Rubber Industry Research and Design Institute, Guangzhou laborers Sea Technology Co., Ltd. The main drafters of this standard. Xie Shenglie, Fu Renping, Li Rongzhao, Hu Runxiang, Zhang Jinfang, Liu Fuwen, Wang Chuan-sheng, Chen Yuquan, Yin Xiao, Wang Kun, He Cheng, Wang updated, Su Shouqiong. This standard replaces the standards previously issued as. --- GB/T 13579-1992, GB/T 13579-2008. Tire curing stereotypes1 ScopeThis standard specifies the tire curing stereotypes (hereinafter referred to as curing machine) models, series and basic parameters, requirements, testing, inspection rules, production Product logo, packaging, transportation and storage. This standard applies to vulcanized tire tire curing machine and hydraulic vulcanizing machine.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 6388 transport packaging shipping symbols GB/T 9969 Industrial Products Manual General GB/T 12783 Rubber and plastics machinery product model preparation methods GB/T 13306 signs GB/T 13384 mechanical and electrical product packaging General technical conditions GB 30747 tire curing press safety requirements HG/T 3119 tire curing press testing methods HG/T 3120 general appearance of rubber and plastics machinery and technical conditions HG/T 3223 rubber machinery terminology General specification for painting of rubber and plastic machinery HG/T 3228-20013 Terms and definitionsGB 30747 and HG/T 3223 as defined by the following terms and definitions apply to this document. For ease of use, repeat the column below Some of the terms and definitions given in GB 30747-2014 and HG/T 3223-2000. 3.1 Mechanical tire curing press mechanicaltyrecuringpress Model-driven in the form of mechanical transmission and pressure on the model tire curing machine. 3.2 Hydraulic tire curing press hydraulictyrecuringpress Model-driven hydraulically driven and pressurized tire curing presses. Remark HG/T 3223-2000, Definition 2.7.55. 3.3 Hot plate platen Inside the heating element can be placed or access through the heat transfer medium, the model or semi-product heating and pressure of the metal plate. [HG/T 3223-2000, definition 2.6.10] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13579-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 13579-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13579-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13579-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13579-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13579-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
