GB/T 13667.2-2017 English PDFUS$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13667.2-2017: Steel bookshelves -- Part 2: Stacked bookshelf Status: Valid GB/T 13667.2: Historical versions
Basic dataStandard ID: GB/T 13667.2-2017 (GB/T13667.2-2017)Description (Translated English): Steel bookshelves -- Part 2: Stacked bookshelf Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y81 Classification of International Standard: 97.140 Word Count Estimation: 10,197 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Older Standard (superseded by this standard): GB/T 13667.2-2003 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 13667.2-2017: Steel bookshelves -- Part 2: Stacked bookshelf---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Steel bookshelves - Part 2. Stacked bookshelf ICS 97.140 Y81 National Standards of People's Republic of China Replacing GB/T 13667.2-2003 Steel shelves Part 2. Multi-storey bookshelf 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 13667 "steel bookshelf" is divided into four parts. --- Part 1. Single and double column shelves; --- Part 2. Layered shelves; --- Part 3. Manual bookshelf; --- Part 4. Electric intensive shelves. This section GB/T 13667 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 13667.2-2003 "laminated steel shelves technical conditions." This section and GB/T 13667.2-2003 phase Than, in addition to editorial changes outside the main technical changes are as follows. --- Deleted material requirements and structural requirements (see the.2003 edition of 5.1.1, 5.1.2, 5.2.2, 5.2.3, 5.2.4 and 5.2.5); --- Modify the deck terms and definitions (see 3.2,.2003 edition 3.2); --- Increasing the term and definition of instability critical load (see 3.6); --- Modify the static deck load requirements and test methods (see 5.3.5.2 and 6.3.5,.2003 version 6.1.3.1 and 7.4); --- Increased shelf support requirements and test methods (see 5.3.7 and 6.3.7); --- Modify the escalator requirements and test methods (see 5.3.8 and 6.3.8,.2003 edition of 6.1.4); --- Increasing the interchangeability of parts requirements and test methods (see 5.3.10 and 6.3.10); --- Remove the fastener requirements (see.2003 version 6.1.5.4) --- Modification of the connector shape and position tolerance test method (see 6.3.4,.2003 version 7.6); --- Modify the installation requirements of the test method (see 6.4,.2003 version 7.7); --- Modify the inspection rules (see Chapter 7,.2003 Edition Chapter 8); --- Modify the logo, packaging, transportation and storage (see Chapter 8,.2003 edition of Chapter 9). This part is proposed by China National Light Industry Council. This part of the National Standardization Technical Committee Furniture (SAC/TC480) centralized. This part of the drafting unit. National Office Equipment Quality Supervision and Inspection Center, Jiangxi Sunshine Safety Equipment Group Co., Ltd., Jiangxi gold Tiger Insurance Equipment Group Co., Ltd., Shanghai Institute of Quality Supervision, Inspection and Technology (National Furniture Quality Supervision and Inspection Center), Jiangxi Yuanda Insurance Equipment Industrial Group Co., Ltd., Jiangxi Zhuoer Metal Equipment Group Co., Ltd., Ningbo Shengda Seiko Intelligent Technology Co., Ltd., Ningbo million Gold Modern Sheet Metal Co., Ltd., Jiangxi Leopard Insurance Equipment Group Co., Ltd., Jiangxi Jindu Insurance Equipment Group Co., Ltd., all furniture Limited. The main drafters of this section. Gu Qiang, Zheng Hong Lian, Deng Chao, Liu Xudong, Ding Haixin, Xiong Shulin, Xu Jun, Xu Di, Nie Jianchun, Zhu Hande, Zhu Chunlei, Zhang Liang, Xiong Kun, Yang Yilin. This part replaces the standards previously issued as. --- GB/T 13667.2-1992, GB/T 13667.2-2003. Steel shelves Part 2. Multi-storey bookshelf1 ScopeGB/T 13667 provisions of this part of the structure and type bookshelf stacked naming, requirements, test methods, inspection rules, signs, bags Loading, transportation and storage. This section applies to laminated shelves.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1958-2004 Geometrical product specifications (GPS) shape and position tolerance testing requirements Books product equipment product model preparation method Steel shelves Part 1 Single and double column bookshelf LY/T 1789-2008 Wooden staircase for residential buildings3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Stacked bookshelf stackedbookshelf Divide the interior space into layers and files with decks, and large steel stack shelves with escalators for people. 3.2 Deck deck Separate shelves up and down, for staff access to books used platform. 3.3 Stacked units stacked bookshelfunit In the laminated steel shelves in a layer, the two columns can independently form a part of the shelves, its function is equivalent to a single column bookshelf The main frame. 3.4 Channel wide, file width widthofpassageway, distancebetweentwostackedbookshelfunits The effective width of the walkway between two stacked units is the width of the passage, and the distance between the centers of the two stacked units is the width of the stall. 3.5 Laminar unit width width frontrontstackedbookshelfunit The distance between the center of two columns. 3.6 Critical load of buckling Column at both ends of the axial compression deformation can withstand the maximum load. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13667.2-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 13667.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13667.2-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13667.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13667.2-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13667.2-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
