|
Std ID |
Description (Standard Title) |
|
GB/T 17830-2017
|
Determination of polyethylene glycol content in nonionic ethoxylated surfactants -- HPLC method
|
|
GB/T 17850.4-2017
|
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag
|
|
GB/T 17850.5-2017
|
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag
|
|
GB/T 17850.7-2017
|
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide
|
|
GB/T 17891-2017
|
High quality paddy
|
|
GB/T 11223.1-1989
|
Analytical determination of uranium in ash of biological samples. Solid fluorimetry
|
|
GB/T 1796.4-2017
|
Tyre valves -- Part 4: Tubeless clamp-in valves
|
|
GB/T 18015.1-2017
|
Multicore and symmetrical pair/quad cables for digital communications -- Part 1: Generic specification
|
|
GB/T 18015.7-2017
|
Multicore and symmetrical pair/quad cables for digital communications -- Part 7: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz -- Sectional specification for digital and analog communication cables
|
|
GB/T 18015.8-2017
|
Multicore and symmetrical pair/quad cables for digital communications -- Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz -- Work area wiring sectional specification
|
|
GB/T 18039.3-2017
|
Electromagnetic compatibility -- Environment -- Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
|
|
GB/T 18046-2017
|
Ground granulated blast furnace slag used for cement, mortar and concrete
|
|
GB/T 18168-2017
|
Specifications of water amusement equipment category
|
|
GB/T 18318.6-2017
|
Textiles -- Determination of bending behavior -- Part 6: Saddle method
|
|
GB/T 18416-2017
|
Domestic sanitary insecticide -- Mosquito coils
|
|
GB/T 18417-2017
|
Domestic sanitary insecticide -- Electrothermal vaporizing mats
|
|
GB/T 18418-2017
|
Domestic sanitary insecticide -- Electrothermal vaporizing liquid
|
|
GB/T 18419-2017
|
Domestic sanitary insecticidal -- Aerosols
|
|
GB/T 18490.1-2017
|
Safety of machinery -- Laser processing machines -- Part 1: General safety requirement
|
|
GB/T 18490.2-2017
|
Safety of machinery -- Laser processing machines -- Part 2: Safety requirements for hand-held laser processing devices
|
|
GB/T 18490.3-2017
|
Safety of machinery -- Laser processing machines -- Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
|
|
GB/T 18802.312-2017
|
Components for low-voltage surge protective devices -- Part 312: Selection and application principles for gas discharge tubes (GDT)
|
|
GB/T 18838.2-2017
|
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit
|
|
GB/T 18845-2017
|
Abrasive grains -- Test-sieving machines
|
|
GB/T 18952-2017
|
Rubber compounding ingredients -- Sulfur and methods of test
|
|
GB/T 18972-2017
|
Classification, investigation and evaluation of tourism resources
|
|
GB/T 1914-2017
|
Chemical analytical filter paper
|
|
GB/T 19202-2017
|
Tropical cyclone naming
|
|
GB/T 19212.16-2017
|
Safety of transformers, reactors, power supply units and combinations thereof -- Part 16: Particular requirements and tests for isolating transformers for the supply of medical locations
|
|
GB/T 19212.27-2017
|
Safety of transformers, reactors, power supply units and combinations thereof -- Part 27: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes
|
|
GB/T 19249-2017
|
Reverse osmosis water treatment equipment
|
|
GB/T 19273-2017
|
Enterprise standardization -- Evaluation and improvement
|
|
GB/T 19472.2-2017
|
Polyethylene structure-wall piping systems for underground usage -- Part 2: Polyethylene spirally enwound structure-wall pipes
|
|
GB/T 19495.9-2017
|
Detection of genetically modified organisms and derived products -- Liquid bead array detection for plant products
|
|
GB/T 19568-2017
|
Wind turbines -- Assembling and installation regulation
|
|
GB/T 19882.222-2017
|
Automatic meter reading system -- Part 222: Physical layer (PHY) specifications -- Wireless communication meter reading system
|
|
GB/T 19889.18-2017
|
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 18: Laboratory measurement of sound generated by rainfall on building elements
|
|
GB/T 20001.5-2017
|
Rules for drafting standards -- Part 5: Specification standards
|
|
GB/T 20001.6-2017
|
Rules for drafting standards -- Part 6: Code of practice standards
|
|
GB/T 20001.7-2017
|
Rules for drafting standards -- Part 7: Guide standards
|
|
GB/T 11224-1989
|
Analytical method of thonium in water
|
|
GB/T 20067-2017
|
Large diameter steel wire ropes
|
|
GB/T 20111.4-2017
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 4: Selection of the appropriate test method for evaluation and classification of electrical insulation systems
|
|
GB/T 20118-2017
|
Steel wire ropes for general purposes
|
|
GB/T 20445-2017
|
Planed lumber
|
|
GB/T 20865-2017
|
No or little-tillage fertilizes-seeder
|
|
GB/T 20881-2017
|
Isomaltooligosaccharide
|
|
GB/T 20883-2017
|
Maltose
|
|
GB/T 20936.1-2017
|
Gas detectors for explosive atmospheres -- Part 1: Performance requirements of detectors for flammable gases
|
|
GB/T 20936.3-2017
|
Gas detectors for explosive atmospheres -- Part 3: Guidance on functional safety of fixed gas detection systems
|
|
GB/T 21076-2017
|
Securities and related financial instruments -- International securities identification numbering system
|
|
GB/T 21448-2017
|
Specification of cathodic protection for underground steel pipelines
|
|
GB/T 21871-2017
|
Rubber compounding ingredients -- Symbols and abbreviated terms
|
|
GB/T 21910-2017
|
Method for measuring relative wet grip performance of passenger car tyres
|
|
GB/T 11225-1989
|
Analytical method of plutonium in water
|
|
GB/T 22003-2017
|
Conformity assessment -- Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems
|
|
GB/T 22036-2017
|
Coast-by methods for measurement of tyre-to-road sound emission
|
|
GB/T 22044-2017
|
Anthropometric definitions and methods for infant's garment
|
|
GB/T 22071.2-2017
|
Test guide for instrument transformers -- Part 2: Inductive voltage transformers
|
|
GB/T 22082-2017
|
Reinforced concrete segments
|
|
GB/T 22199.1-2017
|
Valve-regulated lead-acid batteries for moped -- Part 1: Technical conditions
|
|
GB/T 22199.2-2017
|
Valve-regulated lead-acid batteries for moped -- Part 2: Kinds of products and specifications
|
|
GB/T 22383-2017
|
Rigid gas-insulated transmission lines for rated voltage of 72.5 kV and above
|
|
GB/T 22391-2017
|
Test method of endurance for solid tyres -- Drum method
|
|
GB/T 22566-2017
|
Electrical insulating materials and systems -- General method of evaluation of electrical endurance under repetitive voltage impulses
|
|
GB/T 22578.1-2017
|
Electrical insulation systems (EIS) -- Thermal evaluation of combined liquid and solid components -- Part 1: General requirements
|
|
GB/T 22578.2-2017
|
Electrical insulation system (EIS) -- Thermal evaluation of combined liquid and solid components -- Part 2: Simplified test
|
|
GB/T 11228-1989
|
Co-ordinating sizes of kitchen in dwellings with furniture and equipment
|
|
GB/T 22820-2017
|
Braided base paper
|
|
GB/T 2315-2017
|
Specified failure load series and coupling dimensions for electric power fittings
|
|
GB/T 23172-2017
|
Plaited rattan products
|
|
GB/T 23439-2017
|
[Including Modification 2018XG1] Expansive agents for concrete
|
|
GB/T 23457-2017
|
Pre-applied waterproofing sheets
|
|
GB/T 23507.1-2017
|
Criterion for electrical equipment for oil drilling rig -- Part 1: Main motors
|
|
GB/T 23507.2-2017
|
Criterion for electrical equipment for oil drilling rig -- Part 2: Control system
|
|
GB/T 23507.4-2017
|
Criterion for electrical equipment for oil drilling rig -- Part 4: Auxiliary power equipment and circuits for well site
|
|
GB/T 23541-2017
|
Bonded abrasive products -- Grinding wheel for steel balls
|
|
GB/T 23642-2017
|
Electrical insulating materials and systems -- Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
|
|
GB/T 23696-2017
|
Securities and related financial instruments -- Codes for exchanges and market identification (MIC)
|
|
GB/T 23704-2017
|
Two-dimensional bar code symbol print quality test
|
|
GB/T 23846-2017
|
Cobalt sulfamate for electroplating
|
|
GB/T 23847-2017
|
Nickel sulfamate for electroplating
|
|
GB/T 24004-2017
|
Environmental management systems -- General guidelines on implementation
|
|
GB/T 24131.2-2017
|
Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
|
|
GB/T 2440-2017
|
Urea
|
|
GB/T 2492-2017
|
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Testing
|
|
GB/T 2495-2017
|
Bonded abrasive products -- Packing
|
|
GB/T 24986.5-2017
|
Evaluation methods for reliability on household and similar electrical appliances -- Part 5: Particular requirements for room heaters
|
|
GB/T 25315-2017
|
Home control systems -- Guidelines relating to safety
|
|
GB/T 25604-2017
|
Earth-moving machinery -- Loaders -- Terminology and commercial specifications
|
|
GB/T 25625-2017
|
Earth-moving machinery -- Trainer seat -- Deflection limiting volume, space envelope and performance requirements
|
|
GB/T 25843-2017
|
Technical requirements of control and protection equipment of ±800 kV ultra-high voltage direct current transmission
|
|
GB/T 2664-2017
|
Men’s suits and coats
|
|
GB/T 2668-2017
|
Specifications for single, layer apparels and clothing sets
|
|
GB/T 27021.2-2017
|
Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 2: Competence requirements for auditing and certification of environmental management systems
|
|
GB/T 27067-2017
|
Conformity assessment -- Fundamentals of product certification and guidelines for product certification schemes
|
|
GB/T 27758.3-2017
|
Industrial automation systems and integration -- Diagnostics, capability assessment and maintenance applications integration -- Part 3: Applications integration description method
|
|
GB/T 2910.25-2017
|
Textiles -- Quantitative chemical analysis -- Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform)
|
|
GB/T 2910.26-2017
|
Textiles -- Qualitative chemical analysis -- Part 26: Mixtures of melamine and cotton or aramide fibers (method using hot formic acid)
|
|
GB/T 2945-2017
|
Ammonium nitrate
|