|
Std ID |
Description (Standard Title) |
|
GB/T 949-1988
|
Slotted raised countersunk head screws with waisted shank
|
|
GB/T 950-1986
|
Cross recessed round head wood screws
|
|
GB/T 9505-1988
|
Barium flash getter
|
|
GB/T 9505-1998
|
Barium flash getters
|
|
GB/T 9505-2010
|
Barium flash getters
|
|
GB/T 9506.10-1988
|
Test method for firmness of getter by pressure or sinter
|
|
GB/T 9506.11-1988
|
Test method for weld strength of getter support
|
|
GB/T 9506.1-1988
|
Generic rules for test method of getter properties
|
|
GB/T 9506.2-1988
|
Test method for barium yield of barium flash getter
|
|
GB/T 9506.3-1988
|
Test method for barium content in getter fill and getter film of barium flast getter
|
|
GB/T 9506.4-1988
|
Test method for amount of gas evolved from getter
|
|
GB/T 9506.5-1988
|
Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
|
|
GB/T 9506.6-1988
|
Test method for barium film distribution of nitrogen-doped getter
|
|
GB/T 9506.7-1988
|
Test method for gettering properties of barium flash getter
|
|
GB/T 9506.8-1988
|
Test method for gettering properties of non-evaporable getter
|
|
GB/T 9506.9-1988
|
Test method for amount of filling getter
|
|
GB/T 951-1986
|
Cross recessed countersunk head wood screws
|
|
GB/T 95-1985
|
Plain washers--Product grade C
|
|
GB/T 95-2002
|
Plain washers -- Product grade C
|
|
GB/T 952-1986
|
Cross recessed raised countersunk head wood screws
|
|
GB/T 9530-1988
|
Terms for electronic ceramics
|
|
GB/T 9531.1-1988
|
General specification for electronic ceramic parts
|
|
GB/T 9531.2-1988
|
Specification for ceramic parts, type A
|
|
GB/T 9531.3-1988
|
Specification for ceramic parts, type B
|
|
GB/T 9531.4-1988
|
Specification for ceramic parts, type C
|
|
GB/T 9531.5-1988
|
Specification for ceramic parts, type D
|
|
GB/T 9531.6-1988
|
Specification for ceramic part, type E
|
|
GB/T 9531.7-1988
|
Specification for ceramic parts, type F
|
|
GB/T 953-1988
|
Double end studs (clamping type). Product grade C
|
|
GB/T 9532-1988
|
Designations for LiNbO3, LiTaO3, Bi12GeO20, Bi12SiO20 piezoelectric crystals
|
|
GB/T 9532-2012
|
Designations for piezoelectric crystals
|
|
GB/T 9533-1988
|
(Microwave solid dielectric material dielectric properties of the test method. Coaxial terminal short circuit)
|
|
GB/T 9534-1988
|
Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using Quasi-Optic cavity technique
|
|
GB/T 9535-1988
|
Environmental test methods for terrestrial silicon solar cell module
|
|
GB/T 9535-1998
|
Crystalline silicon terrestrial photovoltaic(PV) modules-design qualification and type approval
|
|
GB/T 9536-1995
|
Electromechanical switches for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 9536-2012
|
Electromechanical switches for use in electrical and electronic equipment -- Part 1: Generic specification
|
|
GB/T 9537-1988
|
Keyboard switches for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 9538-1988
|
General specification of flat cable connector
|
|
GB/T 9540-1988
|
Wideband modem for synchronous data transmission at a data signalling rate higher than 72 kbit/s using 60～108kHz group band circuits
|
|
GB/T 9541-1988
|
2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2 wire leased telephone-type-circuits
|
|
GB/T 954-1986
|
120 degree countersunk head rivets
|
|
GB/T 9542-1988
|
Programming languages PL/1
|
|
GB/T 9543-1988
|
Programming languages PL/1 general purpose subset
|
|
GB/T 9544-1988
|
Information processing systems. Computer graphics. Graphical kernel system (GKS) functional description
|
|
GB/T 9545-1988
|
Cotton spinning machinery--Working width
|
|
GB/T 9546.801-2015
|
Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ
|
|
GB/T 9546.8-2015
|
Fixed resistors for use in electronic equipment -- Part 8: Sectional specification -- Fixed surface mount resistors
|
|
GB/T 9546-1995
|
Fixed resistors for use in electronic equipment. Part 8: Sectional specification: Fixed chip resistors
|
|
GB/T 9547-1994
|
Fixed resistors for use in electronic equipment. Part 8: Blank detail specificatien: Fixed chip resistors. Assessment level E
|
|
GB/T 955-1987
|
Wave spring washers
|
|
GB/T 9553-1993
|
Jinggangmeisu aqueous solution
|
|
GB/T 9559-1988
|
Lindan
|
|
GB/T 956.1-1987
|
Countersunk external toothed lock washers
|
|
GB/T 956.2-1987
|
Countersunk serrated external toothed lock washers
|
|
GB/T 9567-1988
|
Melamine for industrial use
|
|
GB/T 9567-1997
|
Melamine for industrial use
|
|
GB/T 9567-2016
|
Melamine for industrial use
|
|
GB/T 9571-1988
|
Rubber and plastics hoses--Assessment of ozone resistance under static conditions
|
|
GB/T 9572-1988
|
Rubber and plastics hoses and hose assemblies--Determination of electrical resistance
|
|
GB/T 9572-2001
|
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance
|
|
GB/T 9572-2013
|
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity
|
|
GB/T 9573-1988
|
Rubber and plastics hoses and hose asssemblies--Methods of measurement of dimensions
|
|
GB/T 9573-2003
|
Rubber and plastics hose and hose assemblies -- Methods of measurement of dimensions
|
|
GB/T 10964-1989
|
Electrotechnical terminology of electrical accessories, controls and protectors
|
|
GB/T 9574-1988
|
Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
|
|
GB/T 9574-2001
|
Rubber and plastics hoses and hose assemblies -- Ratios of proof and burst pressure to design working pressure
|
|
GB/T 9575-1988
|
Rubber and plastics hoses--Bore diameters and tolerances on length
|
|
GB/T 9575-2003
|
Rubber and plastics hoses for general-purpose industrial applications -- Bore diameters and tolerances, and tolerances on length
|
|
GB/T 9575-2013
|
Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
|
|
GB/T 9576-2001
|
Rubber and plastics hoses and hose assemblies -- Guide to selection, storage, use and maintenance
|
|
GB/T 9576-2013
|
Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance
|
|
GB/T 9577-1988
|
Rubber and plastics hoses and hose assemblies--Specification for marking, package and transportation
|
|
GB/T 9577-2001
|
Rubber and plastics hoses and hose assemblies -- Rules for marking, package and transportation
|
|
GB/T 9578-1988
|
Standard reference black
|
|
GB/T 9578-2002
|
Standard reference black 3
|
|
GB/T 9578-2011
|
Industry reference carbon black 4#
|
|
GB/T 9579-1998
|
Carbon black in SBR (Styrene-butadiene rubber)--Recipe and evaluation method
|
|
GB/T 9579-2006
|
Rubber compounding ingredients -- Carbon black -- Method of evaluation in styrene-butadiene rubbers
|
|
GB/T 9580-1988
|
Standard practice for carbon black--Evaluation of a standard reference black
|
|
GB/T 9580-2002
|
Standard practice for carbon black -- Evaluation of a standard reference black
|
|
GB/T 9580-2009
|
Evaluation of standard reference carbon black
|
|
GB/T 9581-2002
|
Oil for use in the carbon black products -- Ethylene bottom
|
|
GB/T 9581-2011
|
Oil for use in the carbon black products -- Ethylene bottom
|
|
GB/T 958-1989
|
Geological symbols used for regional geological maps
|
|
GB/T 958-2015
|
Geological legends used for regional geological maps
|
|
GB/T 9582-1998
|
Photography--Industrial radiographic film--Determination of ISO speed and average gradient when exposed to X-and γ-radiation
|
|
GB/T 9582-2008
|
Photography -- Industrial radiographic films -- Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X-and Gamma-radiation
|
|
GB/T 9584-1988
|
Measuring methods of electrical properties of voltage-tunable magnetrons
|
|
GB/T 9586-1988
|
Methods of accelerated life test of fluorescent display tubes
|
|
GB/T 9587-1988
|
Blank detail specification for metal-ceramic transmitting tubes dissipation over 1kW
|
|
GB/T 9588-1988
|
Methods of measurement of Geiger-Muller counter tubes
|
|
GB/T 9588-2008
|
Methods of test of Geiger -- Müller counter tubes
|
|
GB/T 959.1-1986
|
Specifications for ring. Circlips
|
|
GB/T 959.2-1986
|
Specifications for ring. Round wire snap rings
|
|
GB/T 959.3-1986
|
Specifications for ring. Cutting rings
|
|
GB/T 9597-1988
|
Fixed capacitors for use in electronic equipment--Sectional specification--Fixed high reactive power--Class 1 ceramic dielectric capacitors
|
|
GB/T 9598-1988
|
Fixed capacitors for use in electronic equipment--Blank detail specification--Fixed high reactive power--Classl 1 ceramic dielectric capacitors--Assessment level E
|
|
GB/T 96.1-2002
|
Plain washers -- Large series -- Product grade A
|
|
GB/T 96.2-2002
|
Plain washers -- Large series -- Product grade C
|