GB/T 9575-2013 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9575-2013: Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
Status: Valid

GB/T 9575: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9575-2013	114	Add to Cart	3 days	Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses	Valid
GB/T 9575-2003	199	Add to Cart	3 days	Rubber and plastics hoses for general-purpose industrial applications -- Bore diameters and tolerances, and tolerances on length	Obsolete
GB/T 9575-1988	199	Add to Cart	3 days	Rubber and plastics hoses--Bore diameters and tolerances on length	Obsolete

Similar standards

GB/T 10822   GB/T 9573   GB/T 11544   GB/T 9576   GB/T 9574   GB/T 9572   

Basic data

Standard ID: GB/T 9575-2013 (GB/T9575-2013)
Description (Translated English): Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G42
Classification of International Standard: 23.040.70
Word Count Estimation: 6,653
Older Standard (superseded by this standard): GB/T 9575-2003
Adopted Standard: ISO 1307-2006, IDT
Regulation (derived from): National Standards Bulletin 2013 No. 10
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the maximum and minimum internal diameter of rubber and plastic hose specifications and allowable values ??for each specification and industrial and motor vehicle with a cutting length tolerance hose. According to the manufacturing

GB/T 9575-2013: Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 G42 National Standards of People's Republic of China Replacing GB/T 9575-2003 Rubber and plastic hoses and hose maximum and minimum specifications Cutting diameter and length tolerance Hosesizes, minimumandmaximuminsidediameters, (ISO 1307.2006, IDT) Issued on. 2013-07-19 2013-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 9575-2003 "General Industrial Rubber and plastics hose diameters and tolerances, and tolerances on length", and GB/T 9575-2003 compared to major technological changes as follows. --- Increased typed content, in accordance with the manufacturing process of the hose into four types, and to a letter (see Chapter 2); --- Modify the inner diameter tolerance of minimum and maximum sizes (see Chapter 2, Table 1, the 2003 version of Chapter 2, Table 1); --- Increasing the size of the hose (see Chapter 2, Table 1). This standard uses the translation method identical with ISO 1307.2006 "Rubber and plastic hoses and hose size maximum and minimum diameter and cutting Length tolerance. " The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products hose Standardization Technical Committee Technical Committee (SAC/TC35/SC1) centralized. This standard is drafted by. lush Far East Rubber Co., Ltd., Ningbo, Shenyang Rubber Research and Design Institute. The main drafters of this standard. Pengcheng Jiang, Wang Shuli, WANG Shu. This standard replaces the standards previously issued as follows. --- GB/T 9575-1988, GB/T 9575-2003. Rubber and plastic hoses and hose maximum and minimum specifications Cutting diameter and length tolerance

1 Scope

This standard specifies the minimum and maximum internal diameter of rubber and plastic hose specifications and specifications of each allowable values \u200b\u200band industrial and motor vehicle hoses Cut length tolerances. According to the manufacturing process, the hose is divided into four types. In addition to the special provisions of the inside diameter hose specifications and scope of this standard hose associated with product standards used together. Specifications and tolerances of the inner diameter of 2 Rubber and plastic hose specifications and the inner diameter of each range should be consistent with Table 1. Rubber and plastic hoses in accordance with the manufacturing process is divided into four Typed. --- A Type. hard core forming a hose; --- B type. soft core molding hose (including the use and non-use of plastic die manufacturing hydraulic hoses); --- C type. coreless molded hose; --- D Type. extruded plastic hose (D type does not include spiral reinforced plastic hose to attract and discharge, which are classified as Type C). Table 1 hose specifications and tolerances of the inner diameter Nominal inner diameter The minimum and maximum inner diameter mm A type Hard core molding Type B Soft core molding Type C Coreless molding (Standard tolerance) Type D Extruded plastic Coreless molding (Tight tolerances) Min Max Min Max Min Max Min Max 3.2 3.2 3.8 - - - - 3.0 3.4 4 4.0 4.8 4.0 4.8 3.4 4.6 3.7 4.3 5 4.6 5.4 4.6 5.4 4.2 5.4 4.7 5.3 6.3 6.2 7.0 6.2 7.0 5.6 7.2 6.0 6.6 8 7.7 8.5 7.7 8.5 7.2 8.8 7.7 8.3 10 9.3 10.1 9.3 10.1 8.7 10.3 9.7 10.3 12.5 12.3 13.5 12.3 13.5 11.9 13.5 12.2 12.8 16 15.5 16.7 15.5 16.7 15.1 16.7 15.7 16.3 19 18.6 19.8 18.6 19.8 18.3 19.9 18.4 19.6 20 19.6 20.8 19.6 20.8 19.3 20.9 - - 25 25.0 26.4 25.0 26.4 24.2 26.6 24.4 25.6 31.5 31.4 33.0 31.4 33.0 30.2 33.4 30.9 32.1 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9575-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9575-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9575-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9575-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9575-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9575-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.