Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 9546.801-2015 English PDF

US$489.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9546.801-2015: Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 9546.801-2015489 Add to Cart 4 days Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ Valid

Similar standards

GB/T 31274   GB/T 6346.14   GB/Z 40842   GB/T 2471   GB/T 9546.8   

Basic data

Standard ID: GB/T 9546.801-2015 (GB/T9546.801-2015)
Description (Translated English): Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L13
Classification of International Standard: 31.040.10
Word Count Estimation: 23,223
Date of Issue: 2015-07-03
Date of Implementation: 2016-03-01
Older Standard (superseded by this standard): GB/T 9547-1994
Quoted Standard: GB/T 2691-2016; GB/T 28162.3-2011; GB/T 9546.8-2015; IEC 60068-2-1; IEC 60068-2-2; IEC 60115-1-2008; IEC 60286-6; IEC 61340-3-1; IEC 61193-2-2007; IEC 61760-1
Regulation (derived from): National Standard Announcement 2015 No.22
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electrical, mechanical and environmental performance requirements of the components. This standard applies to surface mounted fixed resistors.

GB/T 9546.801-2015: Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fixed resistors for use in electronic equipment.Part 8-1. Blank detail specification.Fixed surface mount resistors categorized as level G.Assessment level EZ ICS 31.040.10 L13 National Standards of People's Republic of China Replace GB/T 9547-1994 Fixed resistors for use in electronic equipment Part 8-1. Blank detail specification Surface Mount Fixed Resistors Rating Level EZ Part 8-1. Blankdetailspecification- 2015-07-03 release.2016-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 blank detail specification page 1 4 Features and ratings 3 4.1 General requirements 3 4.2 Size 3 4.3 Rating 3 4.4 Resistance range and allowable deviation 4 4.5 Climate category 4 4.6 Limit of resistance change 4 4.7 Resistance changes with temperature 4 4.8 Climatic order 5 4.9 Marking, packing and ordering information 5 4.10 additional content 6 4.11 to supplement or enhance the harshness or requirements specified in the general and/or sub-regulations 5 inspection requirements 6 5.1 Procedure 6 5.2 100% Test 6 5.3 proof of conformity 5.4 Release certificate certificate 7 5.5 Nonconforming product 7 Appendix A (normative) Zero ohm resistance (bridging) 16 A.1 Ratings and Features 16 A.2 List of accreditation and approval tests A.3 Quality Consistency Test Appendix B (informative) Letter symbols and abbreviations 17 B.1 Letter symbol 17 B.2 abbreviation symbol 17

Foreword

"Fixed device for electronic equipment," the series of national standards are divided into the following sections. - Part 1. General specification (GB/T 5729-2003/IEC 60115-1..2001); Part 2. Sectional specification for low power non - wirewound fixed resistors (GB/T 5730-1985/IEC 60115-2. 1982); - Part 2. Blank detail specification Low power non-wirewound fixed resistor rating level E (GB/T 5731-1985 / IEC 60115-2-1. 1982); Part 4. Sectional specification for power type fixed resistors (GB/T 5732-1985/IEC 60115-4. 1982); - Part 4. Blank detail specification Power type fixed resistor rating level E (GB/T 5733-1985/IEC 60115-4-1. 1983); - Part 4. Blank detail specification Power type fixed resistor rating level F (GB/T 15885-1995/IEC 60115- 4-2..1992); - Part 4. Blank detail specification - Fixed resistors with radiators rated level H (GB/T 17035-1997 / IEC 60115-4-3..1993); - Part 5. Sectional specification of precision fixed resistors (GB/T 5734-1985/IEC 60115-5. 1982); - Part 5. Blank detail specification Precision fixed resistor rating level E (GB/T 5735-1985/IEC 60115-5-1. 1983); - Part 5. Blank detail specification Precision fixed resistor rating level F (GB/T 15884-1995/IEC 60115-5-2. 1992); - Part 6. Sectional specification Fixed resistors for individual resistors (GB/T 7338-1996/IEC 60115-6. 1983); - Part 6. Blank detail specification Resistance and power dissipation same, each resistor can be measured separately for fixed resistor network rating E (GB/T 7339-1987/IEC 60115-6-1. 1983); - Part 6. Blank detail specification Resistance and power dissipation are different, each resistor can be individually measured for fixed resistor network rating E (GB/T 7340-1987/IEC 60115-6-2. 1983); - Part 7. Sectional specification Fixed resistors for resistors that can not be individually measured (GB/T 12276-1990/IEC 60115-7. 1984); - Part 7. Blank detail specification Resistors can not be individually measured for fixed resistance Network rating level E (GB/T 12277-1990/IEC 60115-7-1. 1984); - Part 8. Sectional standard mounting of fixed resistors (GB/T 9546.8-2015); - Part 8-1. Blank detail specification G-rated surface mount fixed resistor rating level EZ (GB/T 9546.801- 2015). This part is part 8-1 of "Fixed Resistors for Electronic Equipment". This part is drafted in accordance with the rules given in GB/T 1.1-2009. Replace part of this part GB/T 9547-1994 "Fixed resistors for use in electronic equipment Part 8. Blank detail specification Chip fixed Resistor rating level E ". This part compared with GB/T 9547-1994, the main technical changes are as follows. --- Standard name "Fixed resistor for electronic equipment Part 8. Blank detail specification Chip fixed resistor rating E "to" Fixed resistors for use in electronic equipment Part 8-1. Blank specification G-rated surface mount fixed resistors Set the level of EZ "; --- 1.3 increase the derating curve; --- increase the table 3 resistance and resistance to allow the deviation; - Added Table 4 Climate category; - increase the limit of the resistance limit; --- 1.8 increase the requirements of cold and dry heat test; --- 1.9.3 to increase the requirements of the package logo; --- increase the storage (1.10.2) and installation (1.10.3) requirements; --- 2.2 increase 100% test requirements; --- 2.5 increase the provisions of nonconforming goods; --- Table 1 of the list of identification tests; --- Add Appendix A and Appendix B. This part is made by the Ministry of Industry and Information Technology of the People's Republic of China. This part is headed by the National Standardization Technical Committee for Electronic Components and Capacitors (SAC/TC165). This part of the drafting unit. China Electronic Technology Standardization Research Institute, Guangdong Fenghua High-tech Co., Ltd., China Zhenhua Group cloud Electronics Co., Ltd. This part of the main drafters. Peng Wei, Yang Xiaoping, Zhou Ruishan, Deng Zhaohua. This part was first published in.1994 and this is the first revision. Fixed resistors for use in electronic equipment Part 8-1. Blank detail specification Surface Mount Fixed Resistors Rating Level EZ

1 Scope

This section is a detailed specification of the surface mount fixed resistors. It specifies the electrical, mechanical and environmental performance description and testing of components The detailed requirements. This section applies to surface mount fixed resistors.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 2691-2016 Symbols for resistors and capacitors GB/T 28162.3-2011 Packaging of components for automatic operation - Part 3. Packaging of surface mounting elements on continuous tapes GB/T 9546.8-2015 Fixed resistors for use in electronic equipment - Part 8. Sectional specification - Fixed surface mount resistors IEC 60068-2-1 Test Method A. Low Temperature (Environmentatesting-Part 2-1. Tests-TestA. Cold) IEC 60068-2-2 Environmental testing - Part 2-2. Test test B. Dry heat (Environmentatesting-Part 2-2. Tests-TestB. Dryheat) IEC 60115-1..2008 Fixed resistors for use in electronic equipment - Part 1. General specification (Fixedresistorsforuseinelectronic equipment-Part 1. Genericspecification IEC 60286-6 Packaging of components for automatic operation - Part 6. Cartridge - type packaging for surface mount components ofcomponentsforautomatichandling-Part 6. Bulkcasepackagingforsurfacemountingcomponents) IEC 61340-3-1 Electrostatics Part 3-1. Electrostatic effect simulation method Human body model (HBM) component testing [Electro- statics-Part 3-1. Methodsforsimulationofelectrostaticeffects-Humanbodymodel (HBM) electro- staticdischargetestwaveforms] IEC 61193-2..2007 Quality assessment systems - Part 2. Selection and use of sampling schemes for inspection of electronic components and packaging (Qualityassessmentsystems-Part 2. Selectionanduseofsamplingplansforinspectionofelectronic componentsandpackages IEC 61760-1 Surface Mount Technology - Part 1. Standard Method for Surface Mount Components (SMDs) Specification [Surface mountingtechnology-Part 1. Standardmethodforthespecificationofsurfacemountingcomponents (SMDs)]

3 blank detail specification page description

Blank detail specification The numbers in square brackets should be consistent with the instructions given below. Detailed specification of identification (1) the name of the national standardization body authorized to issue detailed specifications.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9546.801-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9546.801-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9546.801-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9546.801-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.