GB/T 9505-2010 English PDFUS$489.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9505-2010: Barium flash getters Status: Valid GB/T 9505: Historical versions
Basic dataStandard ID: GB/T 9505-2010 (GB/T9505-2010)Description (Translated English): Barium flash getters Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L90 Classification of International Standard: 31-030 Word Count Estimation: 21,284 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): GB/T 9505-1998 Quoted Standard: GB/T 2828.1; GB/T 4314; GB/T 4965-1985; GB/T 25495-2010; GB/T 25496-2010; GB/T 25497-2010 Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the evaporable getter barium requirements, test methods, inspection rules and the packaging, labeling, storage and transportation. This standard applies to CRT, monitors and other electronic vacuum devices with aerated and non- aerated getter getter. GB/T 9505-2010: Barium flash getters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Barium flash getters ICS 31-030 L90 National Standards of People's Republic of China Replacing GB/T 9505-1998 Barium evaporable getter Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is GB/T 9505-1998 "barium evaporable getter" amendments. This standard is in the original standard GB/T 9505-1998 compared to the main changes are as follows. --- Increasing the GB/T 4314 "getter term" normative reference documents; --- Increase in the ring getter in the recent widespread use of the lamp, small tubes, solar collector tubes getter; --- Added for flat tube big horn annular groove getter; --- Increased getter main product scaffold form varieties; --- As part of the getter has been eliminated, the revision removed some models of the ring getter; --- Revised amount was part of the non-doped barium getter gas, the gas discharge criteria; --- Amendments to the rules determining when delivery inspection; --- Number revised national standard test method references; --- According to GB/T 1.1-2000 requirements were revised format. This standard replaces GB/T 9505-1998. The Standard Annexes A and B are normative appendix Appendix C are informative appendices. This standard by the National Standardization Technical Committee of semiconductor equipment and materials and focal points. This standard was drafted. Nanjing SAES Huadong Vacuum Material Co., Ltd., the Ministry of Information Industry and the Institute of Electronics Industry Standardization, China Electronics Technology Group Corporation 12th Research Institute. The main drafters of this standard. Letter Xue Ying, Guo Weibin, ZHANG Ju first, Liu Yun. This standard was first published in 1988, the 1st Amendment in June 1998, this is the second amendment. Barium evaporable getter1 ScopeThis standard specifies requirements for barium evaporable getter, test methods, inspection rules, packaging, labeling, storage and transportation. This standard applies to CRT, monitors and other electronic vacuum devices with aerated and non-aerated getter getter.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 4314 getter term GB/T 4965-1985 getter type designation and classification GB/T 25495-2010 getter metal release characteristics of test methods GB/T 25496-2010 getter mechanical testing methods GB/T 25497-2010 getter gas absorption and desorption performance test methods 3 Terms, model name and shape of the structure GB/T 4314 as determined by the terms and definitions apply to this standard. Barium evaporable getter type designation shall comply with GB/T 4965-1985 of. Barium evaporable getter according to the shape and structure can be divided into the ring, and the ring-shaped tube dish, big horn ring groove.4 Requirements4.1 Dimensions 4.1.1 getter ring and schematic dimensions As shown in Table 11.1 a schematic diagram of the ring getter...... |
