|
Std ID |
Description (Standard Title) |
|
GB/T 28514.3-2012
|
IPv6 routing protocol -- Part 3: Intermediate system to intermediate system intra-domain routing information exchange protocol (IS-ISv6)
|
|
GB/T 28515.1-2012
|
Test specifications for automatically switched optical network (ASON) -- Part 1: Test specifications for SDH-based ASON
|
|
GB/T 28516-2012
|
Technical requirement for anti-spam Email gateway
|
|
GB/T 28517-2012
|
Network incident object description and exchange format
|
|
GB/T 28518-2012
|
Flame resistant optical fibre cables for communication for mine
|
|
GB/T 28519-2012
|
General principles of energy consumption test methods for telecommunication equipment
|
|
GB/T 285-1994
|
Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions
|
|
GB/T 2852.1-1990
|
Ball slide die sets for press tools--Diagonal pillar sets
|
|
GB/T 2852.2-1990
|
Ball slide die sets for press tools--Center pillar sets
|
|
GB/T 2852.3-1990
|
Ball slide die sets for press tools--Four pillar die sets
|
|
GB/T 2852.4-1990
|
Ball slide die sets for press tools--Back pillar die sets
|
|
GB/T 285-2013
|
Rolling bearings -- Double row cylindrical roller bearings -- Boundary dimensions
|
|
GB/T 28520-2012
|
Intelligent heat exchanger for telecommunication stations/sites
|
|
GB/T 28521-2012
|
Intelligent energy saving system by fresh air for telecommunication stations/sites
|
|
GB/T 2852-2008
|
Ball-bearing die sets for stamping dies
|
|
GB/T 28522-2012
|
Method of calculating recoverability rate of telecommunication terminal equipment
|
|
GB/T 28523-2012
|
Method of calculating recoverability rate of telecommunication infrastructure equipment
|
|
GB/T 28524-2012
|
Media gateway control protocol (MGCP)
|
|
GB/T 28528-2012
|
Model compilation method of hydraulic turbines, storage pumps and pump-turbines
|
|
GB/T 28529-2012
|
Platform brake tester
|
|
GB/T 28530-2012
|
Aligned series of international freight forwarding documents -- Documentary data entry
|
|
GB/T 28531-2012
|
Guideline on transport corridor performance measurement and monitoring
|
|
GB/T 28532-2012
|
Code rule for carrier identifier
|
|
GB/T 28533.1-2012
|
Coupling connector for use in explosive gas atmospheres -- Part 1: Type of protection “n” coupling connector
|
|
GB/T 28534-2012
|
The health and environmental impact on release of sulphur hexafluoride (SF6) used in high-voltage switchgear and controlgear
|
|
GB/T 28535-2012
|
Separators for lead-acid batteries
|
|
GB/T 28536-2012
|
Guidelines for formulating the ageing management programme of mechanical equipment in nuclear power plants
|
|
GB/T 28537-2012
|
Use and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear
|
|
GB/T 28538-2012
|
Ophthalmic optics -- Contact lenses and contact lenses care products -- Determination of biocompatibility by ocular study with rabbit eyes
|
|
GB/T 28539-2012
|
Ophthalmic optics -- Contact lenses and contact lens care products -- Guidelines for determination of preservative uptake and release
|
|
GB/T 28540-2012
|
Estimating method of radon-222 emanation rate from uranium tailings
|
|
GB/T 28541-2012
|
Insulation co-ordination for equipment of ±800kV high voltage direct current converter stations
|
|
GB/T 28469.1-2012
|
Electromagnetic and inductive digital instrument -- Part 1: General specification
|
|
GB/T 28469.2-2012
|
Electromagnetic and inductive digital instrument -- Part 2: Methods of evaluating the performance
|
|
GB/T 28470-2012
|
Methods of evaluating the performance of electrical and pneumatic analogue computing unit for use in industrial process measurement and control systems
|
|
GB/T 28471.1-2012
|
Safety barrier for use in industrial-process measure and control systems -- Part 1: General technical specification
|
|
GB/T 28471.2-2012
|
Safety barrier for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 2847-1996
|
Pozzolanic materials used for cement production
|
|
GB/T 28472.1-2012
|
Distributor for use in industrial-process measure and control systems -- Part 1: General technical specification
|
|
GB/T 28472.2-2012
|
Distributor for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 2847-2005
|
Pozzolanic materials used for cement production
|
|
GB/T 28473.1-2012
|
Temperature transmitters for use in industrial-process measure and control systems -- Part 1: General specification
|
|
GB/T 28473.2-2012
|
Temperature transmitters for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 28474.1-2012
|
Pressure/Differential-pressure transmitters for use in industrial-process measure and control systems -- Part 1: General specification
|
|
GB/T 28474.2-2012
|
Pressure/Differential-pressure transmitters for use in industrial-process measure and control systems -- Part 2: Methods of evaluating the performance
|
|
GB/T 28475.1-2012
|
Microprocessor control equipment in industrial stove -- Part 1: General specification
|
|
GB/T 28475.2-2012
|
Microprocessor control equipment in industrial stove -- Part 2: Methods of evaluating the performance
|
|
GB/T 28479-2012
|
Classifications and codes for international trade documents
|
|
GB/T 28483-2012
|
Environmentally friendly rubber latex for carpet application -- Carboxylated styrene-butadiene rubber latex and limitation of hazardous substances
|
|
GB/T 28484-2012
|
General specification for compression and expansion equipment of electrophones
|
|
GB/T 10417-2008
|
Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness
|
|
GB/T 28486-2012
|
Determination of dimethyl fumarate in mildew preventives
|
|
GB/T 28487-2012
|
Precious metal alloys chains -- Determination of tensile strength -- Method of tensile testing
|
|
GB/T 28488-2012
|
Yarn for machine-made carpets
|
|
GB/T 28489-2012
|
Limits of hazardous substances for musical instruments
|
|
GB/T 28490-2012
|
Button classification and terminology
|
|
GB/T 28491-2012
|
Button general technical requirements and testing methods -- Natural shell button
|
|
GB/T 28492-2012
|
Button general technical requirements and methods -- Copper button
|
|
GB/T 28493-2012
|
Test method for rating vending machines for bottled, canned, and other sealed beverages
|
|
GB/T 28494-2012
|
Globe valves of thermoplastics materials
|
|
GB/T 28495-2012
|
General technical requirements for bamboo and wooden toys
|
|
GB/T 28497-2012
|
The specification of IP over SDH using LAPS
|
|
GB/T 28498-2012
|
Technical requirements of ethernet over SDH
|
|
GB/T 28499.1-2012
|
Technical requirement for IP video terminal equipment -- Part 1: Terminal based on ITU-T H.323
|
|
GB/T 28500-2012
|
Technical requirements of 900/1800 MHz TDMA digital cellular mobile network signaling system NO.7 ISUP
|
|
GB/T 28501-2012
|
Technical requirements of telephony routing over IP (TRIP)
|
|
GB/T 2850-1992
|
Standardized blocks of Rockwell hardness
|
|
GB/T 28502-2012
|
Technical requirement of interworking between No.7 signalling and IP
|
|
GB/T 28503-2012
|
Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 user adaptation layer
|
|
GB/T 28504.1-2012
|
Rare earth doped optical fibre -- Part 1: Characteristics of double-cladding Ytterbium-doped optical fibre
|
|
GB/T 28505-2012
|
Technical specification of national No.7 signaling system 2Mbit/s high speed link
|
|
GB/T 28506-2012
|
Technical specification for national No.7 signalling system - GSM mobile telephone user part (MTUP)
|
|
GB/T 28507-2012
|
Description guidelines for voice exhibition of web documents
|
|
GB/T 28508-2012
|
General technical requirements for broadband customer network based on telecommunication network
|
|
GB/T 28509-2012
|
Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies
|
|
GB/T 2851.1-1990
|
Sliding guide die sets for press tools--Diagonal pillar sets
|
|
GB/T 2851.3-1990
|
Sliding guide die sets for press tools--Back pillar sets
|
|
GB/T 2851.4-1990
|
Sliding guide die sets for press tools--Back pillar sets (narrow)
|
|
GB/T 2851.5-1990
|
Sliding guide die sets for press tools--Center pillar sets
|
|
GB/T 2851.6-1990
|
Sliding guide die sets for press tools--Center pillar sets (round)
|
|
GB/T 2851.7-1990
|
Sliding guide die sets for press tools--Four pillar die sets
|
|
GB/T 28510-2012
|
Technical specification of stream control transmission protocol
|
|
GB/T 28511.1-2012
|
Integrated optical path devices based on planar light wave circuit -- Part 1: Optical power splitter based on PLC technology
|
|
GB/T 28511.2-2012
|
Integrated optical path devices based on planar light wave circuit -- Part 2: DWDM filter based on AWG technology
|
|
GB/T 2851-2008
|
Sliding guide die sets for stamping dies
|
|
GB/T 28512-2012
|
Diameter base protocol for IP network
|
|
GB/T 28513-2012
|
Application profile -- Sign language and lip-reading real-time conversation using low bit-rate video communication
|
|
GB/T 2854-1990
|
Technical specifications for press die sets
|
|
GB/T 10418-1989
|
Steel bonded tungsten carbides--Determination of transverse rupture strength
|
|
GB/T 28543-2012
|
Noise measurement of power capacitors
|
|
GB/T 28544-2012
|
Measurement methods of light output and intrinsic resolution for housed scintillators
|
|
GB/T 28545-2012
|
Guideline for rehabilitation and performance improvement for Hydraulic turbines, storage pumps and pump-turbines
|
|
GB/T 28546-2012
|
Specification for package, transportation and storage of large and medium hydraulic units
|
|
GB/T 28547-2012
|
Selection and application recommendations of metal oxide surge arresters for a.c. systems
|
|
GB/T 28548-2012
|
Guideline of nuclear power plant primary circuit hydraulic tests
|
|
GB/T 28549-2012
|
Verification requirement of supports in nuclear island during nuclear power plant commissioning
|
|
GB/T 2855.10-1990
|
Holder for ball slide die sets for press tools--Die holder for center pillar sets
|
|
GB/T 2855.11-1990
|
Holder for sliding guide die sets for press tools--Punch holder for center pillar sets (round)
|
|
GB/T 2855.1-1990
|
Holder for sliding guide die sets for press tools--Punch holder for diagonal pillar sets
|
|
GB/T 2855.1-2008
|
Holders for sliding guide die sets for stamping dies -- Part 1: Punch holders for die sets
|