Path: Home > GB/T > Page279 > GB/T 26219-2010

Price & Delivery

US$509.00 · In stock · Download in 9 seconds
GB/T 26219-2010: Electrical accessories -- Y-splitter cord sets and Y-splitter interconnection cord sets
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 26219-2010	English	509	Add to Cart	4 days [Need to translate]	Electrical accessories -- Y-splitter cord sets and Y-splitter interconnection cord sets

GB/T 26219-2010: Electrical accessories -- Y-splitter cord sets and Y-splitter interconnection cord sets

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical accessories. Y-splitter cord sets and Y-splitter interconnection cord sets ICS 29.120.01 K30 National Standards of People's Republic of China Electrical accessories Y Y-type cord sets and interconnection cord sets Issued on. 2011-01-14 2011-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 2 General requirements 5 General notes 2 Rating 3 6 7 mark 3 The parts of claim 8 3 9 pairs of Y-joint claim 3 10 Flexible cables (cords) 9 11 10 Electrical continuity and polarity 12 EMC requirements 11 Appendix A (informative) factory wiring Y-cable assembly and the Y-type interconnect cable assembly and the safety-related routine tests (Protection against electric shock and correct polarity) 16 Annex B (informative) List of test specimens required 18

Foreword

The standard framework and GB 15934-2008 "electrical accessories wire assembly and interconnection cord sets" consistent. The Standard Appendix A, Appendix B is an informative annex. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Electric annex Standardization Technical Committee (SAC/TC67) centralized. This standard was drafted. China Electric Apparatus Research Institute, Shenzhen crown Asahi Electronics Co., Songgang Longwell electronics factory, Volex Power Line assembly (Shenzhen) Co., Ltd. Ningbo WARE Electric Co., Ltd., Zhejiang Yuehua Telecommunication Co., Ltd., Dongguan City, or the Wire and Cable Co. the company. The main drafters of this standard. Cai Jun, Wu Hai, holy dynasty, Feng Yonglin, Deng Hongling, Deng Xiaolan, Qiu Hong, Liu Yang, Luo Shiming. Electrical accessories Y Y-type cord sets and interconnection cord sets

1 Scope

This standard specifies the requirements for Y-wire components and Y-type interconnect cable assemblies and similar equipment for household use. This standard applies to household and similar purposes, rated voltage not exceeding 250V, rated current not exceeding 16A, only two single-phase AC Most ground contact or Y-shaped wire components without ground contacts and Y-type interconnect cable assembly. The Y-cable assembly and the Y-type interconnect cable Components for the electrical appliance or equipment connected to the power supply. Note. A typical example is the use of a personal computer connected PC and monitor.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 2099.1 plugs and sockets for household and similar purposes - Part 1. General requirements (GB 2099.1-2008, IEC 60884-1. 2006, MOD) GB/T 5013 (all parts) rated voltage 450/750V and below rubber insulated cables (IEC 60245, IDT) GB/T 5023 (all parts) rated voltage 450/750V and below PVC insulated cables (IEC 60227, IDT) GB/T 5169.10-2006 Fire hazard testing for electric and electronic products - Part 10. Glowing/hot wire based test methods for burning Hot wire apparatus and common test procedure (IEC 60695-2-10.2000, IDT) GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot-wire based test methods to Glow-wire flammability test method for products (IEC 60695-2-11.2000, IDT) GB/T 5169.12-2006 Fire hazard testing for electric and electronic products - Part 12. Glowing/hot wire based test methods for timber Glow-wire flammability test method for materials (IEC 60695-2-12.2000, IDT) GB/T 5169.13-2006 Fire hazard testing for electric and electronic products - Part 13. Glowing/hot wire based test methods for timber Test methods of combustible material glow-wire (IEC 60695-2-13.2000, IDT) GB 17465.1 Appliance couplers for household and similar purposes - Part 1. General requirements (GB 17465.1-1998, eqv IEC 60320-1.1994, MOD) GB 17465.2 Appliance couplers for household and similar purposes Part 2. Household and similar equipment interconnection couplers (GB 17465.2-1998, eqv IEC 60320-2-2.1990, MOD)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Y-wire components Y-splittercordset It made with a non-rewirable plugs and flexible cables (cords) with two non-rewirable connectors composed, with a middle Non-rewirable Y connector, component or equipment for electrical appliances and power connections. Note 1. The example shown in Figure 1. Note 2. "can not disconnect the plug" and "non-rewirable connector" is defined see GB 2099.1 and GB 17465.1, respectively. ...