|
Std ID |
Description (Standard Title) |
|
GB/T 21711.3-2025
|
Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts
|
|
GB/T 21711.201-2024
|
Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
|
|
GB/T 21711.2-2024
|
Electromechanical elementary relays - Part 2: Reliability
|
|
GB/T 16608.1-2023
|
Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
|
|
GB/T 21711.1-2023
|
Electromechanical elementary relays - Part 1: General and safety requirements
|
|
GB/T 21711.7-2018
|
Electromechanical elementary relays -- Part 7: Test and measurement procedures
|
|
GB/T 36640-2018
|
Solid-state relay
|
|
GB/T 16608.50-2012
|
Electromechanical all-or-nothing relays -- Part 50: Sectional specification -- Electromechanical all-or-nothing telecom relays of assessed quality
|
|
GB/T 16608.51-2012
|
Electromechanical all-or-nothing relays -- Part 51: Blank detail specification -- Electromechanical all-or-nothing telecom relays of assessed quality -- Non-standardized types and construction
|
|
GB/T 16608.52-2012
|
Electromechanical all-or-nothing relays -- Part 52: Blank detail specification -- Electromechanical all-or-nothing telecom relays of assessed quality -- Two change-over contacts, 20mm×10mm base
|
|
GB/T 16608.53-2012
|
Electromechanical all-or-nothing relays -- Part 53: Blank detail specification -- Electromechanical all-or-nothing telecom relays of assessed quality -- Two change-over contacts, 14mm×9mm base
|
|
GB/T 16608.54-2012
|
Electromechanical all-or-nothing relays -- Part 54: Blank detail specification -- Electromechanical all-or-nothing telecom relays of assessed quality -- Two change-over contacts, 15mm×7.5mm base
|
|
GB/T 16608.55-2012
|
Electromechanical all-or-nothing relays -- Part 55: Blank detail specification -- Electromechanical all-or-nothing telecom relays of assessed quality -- Two change-over contacts, 11mm×7.5mm (max) base
|
|
GB/T 21711.1-2008
|
Electromechanical elementary relays -- Part 1: General and safety requirements
|
|
GB/T 16608.1-2003
|
Electromechanical elementary all-or-nothing relays of assessed quality -- Part 1: Generic specification
|
|
GB/T 14598.1-2002
|
Electrical relays -- Part 23: Contact performance
|
|
GB/T 18908.1-2002
|
Specified time relays for industrial use -- Part 1: Requirements and tests
|
|
GB/T 14598.12-1998
|
Electrical relays. Part 19: Blank detail specification. Electromechanical all-or-nothing relays of assessed quality. Test schedules 1, 2 and 3
|
|
GB/T 14598.11-1997
|
Electrical relays. Part 19: Sectional specification. Electromechanical all-or-nothing relays of assessed quality
|
|
GB/T 16608-1996
|
Electrical relays. Part 10: Application of the IEC quality assessment system for electronic components to all-or-nothing relays
|
|
GB/T 14598.3-1993
|
Electrical relays. Part 5: Insulation tests for electrical relays
|
|
GB/T 14598.4-1993
|
Electrical relays. Part 14: Endurance test for electrical relay contacts. Preferred values for contact loads
|
|
GB/T 14598.5-1993
|
Electrical relays. Part 15: Endurance tests for electrical relay contacts. Specification for the characteristics of test equipment
|
|
GB/T 14598.6-1993
|
Electrical relays. Part 18: Dimensions for general purpose all-or-nothing relays
|
|
GB/T 18290.2-2000
|
Solderless connections. Part 2: Solderless crimped connections. General requirements, test methods and practical guidance
|
|
GB/T 18290.3-2000
|
Solderless connections. Part 3: Solderless accessible insulation displacement connections. General requirements, test methods and practical guidance
|
|
GB/T 18290.4-2000
|
Solderless connections. Part 4: Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance
|
|
GB/T 18290.5-2000
|
Solderless connections. Part 5: Solderless press-in connections. General requirements, test methods and practical guidance
|
|
GB/T 15176-1994
|
Generic specification for sockets and accessories for electronic plug-in devices
|
|
GB/T 15286-1994
|
General specification for terminals
|
|
GB/T 18501.8100-2025
|
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
|
|
GB/T 18501.8101-2025
|
Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
|
|
GB/T 11313.58-2023
|
Radio-frequency connectors - Part 58: Sectional specification for SBMA series blind-mate RF coaxial connectors
|
|
GB/T 42207.5-2022
|
Connectors for electronic equipment - Product requirements - Rectangular connectors - Part 5: Detail specification for rewirable power connectors with snap locking for rated voltage of250 V d. c. and rated current of 30 A
|
|
GB/T 11313.35-2021
|
Radio-frequency connectors - Part 35: Sectional specification for 2.92 series R. F. connectors
|
|
GB/T 11313.40-2021
|
Radio-frequency connectors - Part 40: Sectional specification for 2.4 series R. F. connectors
|
|
GB/T 11313.41-2021
|
Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors
|
|
GB/T 5095.2303-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
|
|
GB/T 5095.2304-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
|
|
GB/T 5095.2307-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
|
|
GB/T 5095.2501-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-1: Test 25a: Crosstalk ratio
|
|
GB/T 5095.2502-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-2: Test 25b: Attenuation (insertion loss)
|
|
GB/T 5095.2503-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-3: Test 25c: Rise time degradation
|
|
GB/T 5095.2504-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-4: Test 25d: Propagation delay
|
|
GB/T 5095.2505-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-5: Test 25e: Return loss
|
|
GB/T 5095.2507-2021
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
|
|
GB/T 11313.42-2021
|
Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF connectors
|
|
GB/T 5095.2506-2020
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-6: Test 25f: Eye pattern and jitter
|
|
GB/T 5095.2509-2020
|
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk
|
|
GB/T 17570-2019
|
General specification for optical fibre fusion splicers
|
|
GB/T 11313.15-2018
|
Radio frequency connectors -- Part 15: R. F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in), characteristic impedance 50 ohms, screw coupling (Type SMA)
|
|
GB/T 11313.39-2018
|
Radio frequency connectors -- Part 39: Sectional specification for CQM series quick lock RF connectors
|
|
GB/T 13536-2018
|
Connectors for aircraft ground electrical supplies
|
|
GB/T 11313.38-2018
|
Radio-frequency connectors -- Part 38: Sectional specification for 50 Ω model, slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications
|
|
GB/T 11313.11-2018
|
Radio-frequency connectors -- Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling with characteristic impedance 50 Ω (type 4.1/9.5)
|
|
GB/T 11313.13-2018
|
Radio-frequency connectors -- Part 13: Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors
|
|
GB/T 11313.43-2018
|
Radio-frequency connectors -- Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
|
|
GB/T 34989-2017
|
Connectors -- Safety requirements and tests
|
|
GB/T 11313.101-2015
|
Radio-frequency connectors -- Part 101: Sectional specification for MMCX series RF coaxial connectors
|
|
GB/T 11313.16-2015
|
Radio-frequency connectors -- Part 16: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling -- Characteristics impedance 50Ω (75 Ω) (type N)
|
|
GB/T 11313.29-2015
|
Radio frequency connectors -- Part 29: Sectional specification for miniature radio frequency coaxial connector (type 1.0/2.3) with screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) mechanism with characteristic impedance 50 Ω
|
|
GB/T 11313.37-2015
|
Radio-frequency connectors -- Part 37: Sectional specification for STWX8 series R.F. coaxial connectors
|
|
GB/T 11313.8-2015
|
Radio-frequency connectors -- Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock -- Characteristic impedance 50 Ω (75 Ω) (type BNC)
|
|
GB/T 15157.2-2015
|
Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features
|
|
GB/T 18290.2-2015
|
Solderless connections -- Part 2: Crimped connections -- General requirements, test methods and practical guidance
|
|
GB/T 18290.4-2015
|
Solderless connections -- Part 4: Solderless non-accessible insulation displacement connections -- General requirements, test methods and practical guidance
|
|
GB/T 18290.5-2015
|
Solderless connections -- Part 5: Press-in connections -- General requirements, test methods and practical guidance
|
|
GB/T 11313.1-2013
|
Radio-frequency connectors -- Part 1: Generic specification -- General requirements and measuring methods
|
|
GB/T 11313.18-2013
|
Radio-frequency connectors -- Part 18: Sectional specification -- Radio frequency coaxial connectors of type SSMA
|
|
GB/T 11313.19-2013
|
Radio-frequency connectors -- Part 19: Sectional specification -- Radio frequency coaxial connectors of type SSMB
|
|
GB/T 11313.24-2013
|
Radio frequency connectors -- Part 24: Sectional specification -- Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F)
|
|
GB/T 11313.9-2013
|
Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors
|
|
GB/T 15872-2013
|
Power supply interface for semiconductor equipment
|
|
GB/T 11313.10-2012
|
Radio-frequency connectors -- Part 10: Sectional specification -- SMB series R.F. coaxial connectors
|
|
GB/T 9393-2012
|
STZ3 type power supply connector for electronic measurement instrument
|
|
GB/T 15157.12-2011
|
Connectors for frequencies below 3 MHz for use with printed boards -- Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
|
|
GB/T 11313.2-2007
|
Radio-frequency connectors -- Part 2: Sectional specification -- Radio frequency coaxial connectors for type 9.52
|
|
GB/T 11313.4-2007
|
Radio-frequency connectors -- Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16mm (0.63 in) with screw lock -- Characteristic impedance 50 ohms (Type 7-16)
|
|
GB/T 15157.14-2007
|
Connectors for frequencies below 3 MHz for use with printed boards -- Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
|
|
GB/T 21021-2007
|
RF connector, connector cable assemblies and cable -- Intermodulation level measurement
|
|
GB/T 11313.36-2006
|
Radio-frequency connectors -- Part 36: Microminiature r.f. coaxial connectors with snap-on coupling -- Characteristic impedance 50 Ohms (Type MCX)
|
|
GB/T 15157.7-2002
|
Connectors for frequencies below 3MHz for use with printed boards -- Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
|
|
GB/T 17562.8-2002
|
Rectangular connectors for frequencies below 3 MHz -- Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen
|
|
GB/T 11313.24-2001
|
Part 24: RF connector the 75Ω cable distribution system with threaded connection RF coaxial connector (F-type)
|
|
GB/T 11313.33-2001
|
Radio-frequency connectors -- Part 33: Sectional specification for series BMA r.f. connectors
|
|
GB/T 18501.1-2001
|
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 1: Generic specification
|
|
GB/T 18501.2-2001
|
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 2: Circular connectors with assessed quality -- Sectional specification
|
|
GB/T 11313.1-2000
|
Radio-frequency connectors. Part 1-1: Single, multi-series blank detail specification
|
|
GB/T 15157.2-1998
|
Connectors for frequencies below 3MHz for use with printed boards. Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54mm(0.1in) with commonmounting features
|
|
GB/T 17562.1-1998
|
Rectangular connectors for frequencies below 3MHz. Part 1: Generic specification. General requirements and quide for the preparation of detail specifications, for connectors with assessed quality
|
|
GB/T 17570-1998
|
General specification for optical fibre fusion splicers
|
|
GB/T 12507.2-1997
|
Connectors for optical fibres and cables. Part 2: Sectional specification for fibre optic connector--Type F-SMA
|
|
GB/T 11313-1996
|
Redio-frequency connectors--Part 1: Generic specification--General requirements and measuring methods
|
|
GB/T 15886-1995
|
R.F. coaxial connectors，type C
|
|
GB/T 15887-1995
|
R. F. coaxial connectors, type SMC
|
|
GB/T 15888-1995
|
R.F. coaxial connectors，type UHF
|
|
GB/T 15889-1995
|
R. F. coaxial connectors, type SSMA
|
|
GB/T 15890-1995
|
R. F. coaxial connectors, type SSMB
|
|
GB/T 15157-1994
|
Connectors for frequencies below 3MHz for use with printed boards. Part l: Generic specification. General requirements and guide for the preparation of detail specifications, with assessed quality
|
|
GB/T 15158-1994
|
Series and style of connectors for radio and associated sound equipment
|