GB/T 17570-2019 PDF EnglishUS$439.00 · In stock · Download in 9 seconds
GB/T 17570-2019: General specification for optical fibre fusion splicers Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 17570: Historical versions
Similar standardsGB/T 17570-2019: General specification for optical fibre fusion splicers---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17570-2019(General specification for optical fiber fusion splicers) ICS 33.180.20 L23 National Standards of People's Republic of China Replace GB/T 17570-1998 General specification for optical fiber fusion splicers Generalspecificationforopticalfibrefusionsplicers Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued Content Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Product Category 3 5 Requirements 3 5.1 General requirements 3 5.2 Appearance and Structure 3 5.3 Size and weight 4 5.4 Function 4 5.5 Performance Characteristics 4 5.6 Security 5 5.7 Environmental Adaptability 5 5.8 Packaging and Transportation 5 5.9 Electromagnetic Compatibility 5 5.10 Power Adaptability 5 5.11 Reliability 6 6 Test method 6 6.1 Test conditions 6 6.2 Appearance and Structure Inspection 6 6.3 Dimensions and weight checks 6 6.4 Function check 6 6.5 Performance Characteristics Test 6 6.6 Safety Test 11 6.7 Environmental Adaptability Test 11 6.8 Packaging and transportation test 11 6.9 Electromagnetic Compatibility Test 11 6.10 Power Adaptability Test 11 6.11 Reliability Test 12 7 Quality Inspection Rules 12 7.1 General provisions 12 7.2 Inspection item 12 7.3 Identification test 13 7.4 Quality consistency test 13 7.5 Other 14 8 Marking, packaging, transportation, storage 14 8.1 Mark 14 8.2 Random File 15 8.3 Transportation 15 8.4 Storage 15 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 17570-1998 "General specification for optical fiber fusion splicer", major technical changes compared with GB/T 17570-1998 as follows. --- Revised the scope of application of the standard (see Chapter 1, Chapter 1 of the.1998 edition); --- Added some normative references (see Chapter 2); --- Revised the terms and definitions of "multimode fiber, standard single mode fiber, special fiber" (see 3.1, 3.2, 3.7,.1998 version 3.2, 3.1, 3.3); --- Added "dispersion-shifted fiber, cut-off wavelength shift fiber, non-zero dispersion-shifted fiber, bend-insensitive fiber, ribbon fiber, back Terms and definitions for wave loss, splice time, heating time, fiber image magnification, tensile test, electrode life and end angle (See 3.3~3.6, 3.8, 3.12~3.18); --- Revised the product classification of fiber fusion splicers (see Chapter 4, Chapter 4 of the.1998 edition); --- Added "splicing, heating, parameter setting and other functions" (see 5.4); --- Increased "return loss, welding time, heating time, fiber image magnification, electrode life, number of work cycles" performance Sexual requirements (see 5.5.5~5.5.10); --- Added "return loss, welding time, heating time, fiber image magnification, electrode life, number of work cycles" test side Law (see 6.5.7~6.5.12); --- Added test method for "safety test" (see 6.6); --- Increased the test method for the "package transport test" (see 6.8); --- Increased the "power consumption" test method (see 6.10.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of the National Standardization Technical Committee for Electronic Measuring Instruments (SAC/TC153). This standard was drafted. The 41st Research Institute of China Electronics Technology Group Corporation, Nanjing Jilong Optical Fiber Communication Co., Ltd. The main drafters of this standard. Yang Xiaoguang, Tao Longdi, Shang Shoufeng, Liu Zhen, Zhang Wei, He Chun, Li Xianhua, Wang Yun, Wu Chao. The previous versions of the standards replaced by this standard are. ---GB/T 17570-1998. General specification for optical fiber fusion splicers1 ScopeThis standard specifies the terms and definitions of fiber fusion splicers, product classification, requirements, test methods, quality inspection rules and signs, packaging, and transportation. Requirements for transportation and storage. This standard is applicable to optical fiber fusion splicers (hereinafter referred to as fusion splicers) for welding quartz glass fibers.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 2423.21-2008 Environmental testing of electric and electronic products - Part 2. Test method Test M. Low pressure GB 4824 Industrial, Scientific and Medical (ISM) Radio Frequency Equipment Harassment Characteristics Limits and Measurement Methods GB/T 6587-2012 General specification for electronic measuring instruments GB/T 6592-2010 Electrical and electronic measuring equipment performance representation GB/T 9771.1-2008 single-mode optical fibres for communication - Part 1 GB/T 9771.2-2008 single-mode optical fibres for communication - Part 2 GB/T 9771.4-2008 single-mode optical fibres for communication - Part 4 GB/T 9771.5-2008 single-mode optical fibres for communication - Part 5 GB/T 9771.7-2012 single-mode optical fibres for communication - Part 7 GB/T 12357.1-2015 Multimode optical fibres for communication - Part 1 GB/T 15972.31-2008 Specification for optical fibre test methods - Part 31. Methods and test procedures for mechanical properties - Resistance Tensile strength Optical fibres - Test methods - Part 40. Test methods and tests for transmission and optical properties Program---attenuation GB/T 16511-1996 Random documents for electrical and electronic measuring equipment GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test GB/T 17626.6 Electromagnetic compatibility test and measurement technology Conducted disturbance immunity of RF field induction GB/T 18268.1-2010 Electromagnetic compatibility requirements for electrical equipment - Part 1 . General requirements SJ/T 946 Basic requirements for electrical and mechanical structures of electronic measuring instruments3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Multimode fiber multimodeopticalfibre Multiple modes of fiber can be transmitted at a given operating wavelength. GB/T 17570-2019 (General specification for optical fiber fusion splicers) ICS 33.180.20 L23 National Standards of People's Republic of China Replace GB/T 17570-1998 General specification for optical fiber fusion splicers Generalspecificationforopticalfibrefusionsplicers Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued Content Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Product Category 3 5 Requirements 3 5.1 General requirements 3 5.2 Appearance and Structure 3 5.3 Size and weight 4 5.4 Function 4 5.5 Performance Characteristics 4 5.6 Security 5 5.7 Environmental Adaptability 5 5.8 Packaging and Transportation 5 5.9 Electromagnetic Compatibility 5 5.10 Power Adaptability 5 5.11 Reliability 6 6 Test method 6 6.1 Test conditions 6 6.2 Appearance and Structure Inspection 6 6.3 Dimensions and weight checks 6 6.4 Function check 6 6.5 Performance Characteristics Test 6 6.6 Safety Test 11 6.7 Environmental Adaptability Test 11 6.8 Packaging and transportation test 11 6.9 Electromagnetic Compatibility Test 11 6.10 Power Adaptability Test 11 6.11 Reliability Test 12 7 Quality Inspection Rules 12 7.1 General provisions 12 7.2 Inspection item 12 7.3 Identification test 13 7.4 Quality consistency test 13 7.5 Other 14 8 Marking, packaging, transportation, storage 14 8.1 Mark 14 8.2 Random File 15 8.3 Transportation 15 8.4 Storage 15ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 17570-1998 "General specification for optical fiber fusion splicer", major technical changes compared with GB/T 17570-1998 as follows. --- Revised the scope of application of the standard (see Chapter 1, Chapter 1 of the.1998 edition); --- Added some normative references (see Chapter 2); --- Revised the terms and definitions of "multimode fiber, standard single mode fiber, special fiber" (see 3.1, 3.2, 3.7,.1998 version 3.2, 3.1, 3.3); --- Added "dispersion-shifted fiber, cut-off wavelength shift fiber, non-zero dispersion-shifted fiber, bend-insensitive fiber, ribbon fiber, back Terms and definitions for wave loss, splice time, heating time, fiber image magnification, tensile test, electrode life and end angle (See 3.3~3.6, 3.8, 3.12~3.18); --- Revised the product classification of fiber fusion splicers (see Chapter 4, Chapter 4 of the.1998 edition); --- Added "splicing, heating, parameter setting and other functions" (see 5.4); --- Increased "return loss, welding time, heating time, fiber image magnification, electrode life, number of work cycles" performance Sexual requirements (see 5.5.5~5.5.10); --- Added "return loss, welding time, heating time, fiber image magnification, electrode life, number of work cycles" test side Law (see 6.5.7~6.5.12); --- Added test method for "safety test" (see 6.6); --- Increased the test method for the "package transport test" (see 6.8); --- Increased the "power consumption" test method (see 6.10.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of the National Standardization Technical Committee for Electronic Measuring Instruments (SAC/TC153). This standard was drafted. The 41st Research Institute of China Electronics Technology Group Corporation, Nanjing Jilong Optical Fiber Communication Co., Ltd. The main drafters of this standard. Yang Xiaoguang, Tao Longdi, Shang Shoufeng, Liu Zhen, Zhang Wei, He Chun, Li Xianhua, Wang Yun, Wu Chao. The previous versions of the standards replaced by this standard are. ---GB/T 17570-1998. General specification for optical fiber fusion splicers1 ScopeThis standard specifies the terms and definitions of fiber fusion splicers, product classification, requirements, test methods, quality inspection rules and signs, packaging, and transportation. Requirements for transportation and storage. This standard is applicable to optical fiber fusion splicers (hereinafter referred to as fusion splicers) for welding quartz glass fibers.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 2423.21-2008 Environmental testing of electric and electronic products - Part 2. Test method Test M. Low pressure GB 4824 Industrial, Scientific and Medical (ISM) Radio Frequency Equipment Harassment Characteristics Limits and Measurement Methods GB/T 6587-2012 General specification for electronic measuring instruments GB/T 6592-2010 Electrical and electronic measuring equipment performance representation GB/T 9771.1-2008 single-mode optical fibres for communication - Part 1 GB/T 9771.2-2008 single-mode optical fibres for communication - Part 2 GB/T 9771.4-2008 single-mode optical fibres for communication - Part 4 GB/T 9771.5-2008 single-mode optical fibres for communication - Part 5 GB/T 9771.7-2012 single-mode optical fibres for communication - Part 7 GB/T 12357.1-2015 Multimode optical fibres for communication - Part 1 GB/T 15972.31-2008 Specification for optical fibre test methods - Part 31. Methods and test procedures for mechanical properties - Resistance Tensile strength Optical fibres - Test methods - Part 40. Test methods and tests for transmission and optical properties Program---attenuation GB/T 16511-1996 Random documents for electrical and electronic measuring equipment GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test GB/T 17626.6 Electromagnetic compatibility test and measurement technology Conducted disturbance immunity of RF field induction GB/T 18268.1-2010 Electromagnetic compatibility requirements for electrical equipment - Part 1 . General requirements SJ/T 946 Basic requirements for electrical and mechanical structures of electronic measuring instruments3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Multimode fiber multimodeopticalfibre Multiple modes of fiber can be transmitted at a given operating wavelength. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 17570-2019 be delivered?Answer: The full copy PDF of English version of GB/T 17570-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 17570-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17570-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17570-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 17570-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17570-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 17570-2019?A step-by-step guide to download PDF of GB/T 17570-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 17570-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
