Home   Cart   Quotation   Policy   About-Us
www.ChineseStandard.net
SEARCH

GB/T 11313.43-2018 English PDF

US$519.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11313.43-2018: Radio-frequency connectors -- Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 11313.43-2018519 Add to Cart 3 days Radio-frequency connectors -- Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors Valid

Similar standards

GB/T 17737.100   GB/T 21711.1   GB/T 11313.41   GB/T 11313.42   GB/T 11313.40   

Basic data

Standard ID: GB/T 11313.43-2018 (GB/T11313.43-2018)
Description (Translated English): Radio-frequency connectors -- Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L23
Classification of International Standard: 33.120.30
Word Count Estimation: 26,277
Date of Issue: 2018-09-17
Date of Implementation: 2019-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 11313.43-2018: Radio-frequency connectors -- Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio-frequency connectors - Part 43. Sectional specificaton for RBMA series blind mating RF power connectors ICS 33.120.30 L23 National Standards of People's Republic of China RF connector Part 43. RBMA series blind matching RF coaxial connector sub-specification Part 43. SectionalspecificatonforRBMAseriesblindmatingRF (IEC 61169-43.2013, IDT) Published on.2018-09-17 2019-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword I 1 Scope 1 2 Normative references 1 3 mating interface and standard gauge 1 3.1 Dimensions - Universal Connector - Level 2 1 3.1.1 Pin Connector 1 3.1.2 Jack Connector 3 3.2 Standard Regulation 4 3.2.1 Standard Specification for Center Connector of Jack Connector 3.2.2 Pin connector external contact parts with standard gauge 5 3.3 Dimensions - Standard Test Connector Size - 0 6 3.3.1 Pin Standard Test Connector 6 3.3.2 Jack standard test connector 7 3.4 General requirements for connectors mounted on modules or panels 8 3.4.1 Limit values for allowable radial misalignment and axial displacement of the connector 8 3.4.2 Special Connector Installation Instructions 10 4 Quality assessment procedures 10 4.1 General 10 4.2 Ratings and characteristics 10 4.3 Test schedule and inspection requirements 13 4.3.1 Settlement test 13 4.3.2 Cycle test 13 4.4 Procedure 15 4.4.1 Quality consistency test 15 4.4.2 Identification approval and its maintenance 15 5 Detailed Specification Development Guide 15 5.1 General 15 5.2 Identification of components 15 5.3 Performance 15 5.4 Marks, order documents and related matters 15 5.5 Selection of test, test conditions and severity 16 5.6 Blank detail specification format for RBMA series connectors 16

Foreword

GB/T 11313 "RF Connector" has or plans to release the following parts. --- Part 1. General requirements and test methods; --- Part 2. Section 9.52 RF coaxial connector sub-specification; --- Part 3. Double-pin connector for double-balanced antenna feeders. --- Part 4. outer conductor inner diameter of 16mm (0.63in), characteristic impedance of 50Ω, threaded RF coaxial connector (7-16 type); --- Part 5. Partial specification for RF coaxial connectors for mating with 60096 IEC 50-17 and larger cables; --- Part 6. Partial specification for RF coaxial connectors for mating with 60096 IEC 75-17 and larger cables; --- Part 7. RF coaxial connector with outer conductor inner diameter of 9.5mm (0.374in), characteristic impedance of 50Ω, bayonet connection (Type C) sub-specification; --- Part 8. RF coaxial connection with outer conductor inner diameter of 6.5mm (0.256in), characteristic impedance of 50Ω (75Ω), bayonet connection Connector (BNC type) sub-specification; ---Part 9. SMC series RF coaxial connector sub-specification; --- Part 10. SMB series RF coaxial connector sub-specification; --- Part 11. RF coaxial connector with outer conductor inner diameter 9.5mm (0.374in), characteristic impedance 50Ω, threaded connection (4.1/9.5 type) sub-specification; --- Part 12. Non-matching threaded connection RF coaxial connector (UHF type) sub-specification; --- Part 13. Sectional specification for 1.6/5.6 and 1.8/5.6 RF coaxial connectors; --- Part 14. External conductor inner diameter 12mm (0.472in), characteristic impedance 75Ω, threaded RF coaxial connector (3.5/12 type) sub-specification; --- Part 15. RF coaxial connector with outer conductor inner diameter of 4.13mm (0.163in), characteristic impedance of 50Ω, threaded connection (SMA type); --- Part 16. External conductor with inner diameter of 7mm (0.276in), characteristic impedance of 50Ω (75Ω), threaded RF coaxial connection Connector (N type) sub-specification; --- Part 17. RF coaxial connectors with outer conductor inner diameter 6.5mm (0.256in), characteristic impedance 50Ω, threaded connection (TNC type) sub-specification; --- Part 18. SSMA series RF coaxial connector sub-specification; --- Part 19. SSMB type RF coaxial connector sub-specification; --- Part 20. RF coaxial connector with outer conductor inner diameter of 2.08mm (0.082in), characteristic impedance of 50Ω, threaded connection (SSMC type) sub-specification; --- Part 21. The outer conductor has an inner diameter of 9.5 mm (0.374 in) and a characteristic impedance of 50 Ω. It has two different threaded connections. RF connector (SC-A and SC-B type) sub-specification; --- Part 22. Double-core RF connectors (BNO type) with double-conductor shielded symmetrical cables for bayonet connection; --- Part 23. Connect 3.5mm hard precision coaxial cable, outer conductor inner diameter of 3.5mm (0.1378in) RF coaxial connector specification; --- Part 24. 75Ω cable distribution system with threaded RF coaxial connector (F type) sub-specification; ---Part 25. Double-core threaded type with double inner conductor shielded symmetrical cable and outer conductor inner diameter of 13.56mm (0.534in) (3/4- 20UNEF) connection connector (TWHN type) sub-specification; --- Part 26. TNCA series RF coaxial connector sub-specification; --- Part 27. 75Ω cable distribution system with threaded connection RF coaxial connector (E type) sub-specification; --- Part 28. outer conductor inner diameter is 5.60mm (0.220in), characteristic impedance is 75Ω, card lock connection RF coaxial connector specification; --- Part 29. 50Ω and 75Ω with a characteristic impedance of 50Ω, with threaded, push-pull, quick-lock or slide-type rack or panel Type RF coaxial connector (1.0/2.3 type) sub-specification; --- Part 31. RF coaxial connector with outer conductor inner diameter 1.0mm (0.039in), characteristic impedance 50Ω, threaded connection (type 1.0) sub-specification; --- Part 32. RF coaxial connector with outer conductor inner diameter of 1.85mm (0.072in), characteristic impedance of 50Ω, threaded connection (1.85 type) sub-specification; --- Part 33. BMA series RF connector sub-specification; --- Part 35. 2.92 series RF connector sub-specification; ---Part 36. Snap-on connection micro-miniature RF coaxial connectors with characteristic impedance of 50 Ω (MCX type); --- Part 37. STWX8 series RF coaxial connector sub-specification; --- Part 38. Module slide-in RF connectors (TMA type) for 50 ohm backplanes and panels; --- Part 39. CQM series fast locking RF connector sub-specification; --- Part 40. 2.4 series RF connector sub-specification; --- Part 41. CQA series fast locking RF connector sub-specification; --- Part 42. CQN series fast locking RF connector sub-specification; --- Part 43. RBMA series blind matching RF coaxial connector sub-specification; --- Part 44. SMP series push-in RF coaxial connector sub-specification; --- Part 45. SQMA series fast locking RF coaxial connector sub-specification; --- Part 47. Fquick series 75Ω cable distribution system with plug-in RF coaxial connector sub-specification; --- Part 48. BMP series blind matching RF coaxial connector sub-specification; --- Part 49. SMAA series RF coaxial connector sub-specification; --- Part 50. Inner conductor inner diameter is 4.11mm, characteristic impedance is 50Ω, fast locking RF coaxial connector (QMA type) Sub-specification --- Part 51. outer conductor inner diameter of 13.5mm, characteristic impedance of 50Ω, bayonet locking RF coaxial connector (QLI type) specification; --- Part 53. S7-16 series threaded RF coaxial connector sub-specification; --- Part 54. The outer conductor has an inner diameter of 10mm, and the characteristic impedance is 50Ω RF coaxial connector (4.3-10 series) sub-specification; --- Part 58. SBMA series blind matching RF coaxial connector sub-specification; --- Part 59. L32-4 and L32-5 type threaded multi-channel RF connector sub-specification; --- Part 101. MMCX series RF coaxial connector sub-specification; --- Part.201. Electrical test method reflection coefficient and voltage standing wave ratio; --- Part 202. Electrical test method insertion loss. This part is part 43 of GB/T 11313. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the translation method equivalent to IEC 61169-43.2013 "RF Connector Part 43. RBMA Series Blind RF Coaxial connector sub-specification. This section has the following editorial changes compared to IEC 61169-43.2013. --- Correct the "thread connection" in the "1 Scope" of IEC 61169-43.2013 to "blind connection"; --- Correct the "j" size 2.00 in Table 2 of IEC 61169-43.2013 to 3.00; --- Correct the geometric tolerance of the "f" size in Figure 5 of IEC 61169-43.2013 to the "e" size and increase the tolerance. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part is under the jurisdiction of the National High-Tech Cable and Connector Standardization Technical Committee for Electronic Equipment (SAC/TC190). This section drafted by. Ningbo Jipin Technology Co., Ltd., China Electronics Technology Standardization Institute. The main drafters of this section. Chen Shuyi, Wang Bo, Wu Zhengping. RF connector Part 43. RBMA series blind matching RF coaxial connector sub-specification

1 Scope

This part is the sub-specification of GB/T 11313.1-2013, which gives detailed specifications for the development of RBMA series blind-fit RF coaxial connectors. Fan's content and rules, as well as a blank format for detailed specifications. RBMA series RF coaxial connectors have a characteristic impedance of 50Ω, suitable for In the fields of wireless, microwave, communication, etc., it is equipped with RF coaxial cable or microstrip, and the working frequency is up to 12.4GHz. This section specifies the size of the mating interface of the 2-level universal connector, the detailed dimensions of the 0-level standard test connector, and Detailed specification requirements for all detailed specifications applicable to RBMA series RF coaxial connectors selected in GB/T 11313.1-2013 And test procedures. This section also specifies recommended ratings and characteristics to be considered when preparing detailed specifications, and specifies the applicable ratings for Class M and Class H. A list of tests and inspection requirements for grades (see Tables 8 and 9).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 11313.1-2013. Part 1 . General specification general requirements and test methods (IEC 61169-1. 1998, IDT)

3 mating interface and standard gauge

3.1 Dimensions - Universal Connector - Level 2 3.1.1 Pin Connector All unsized graphic structures are for reference only. Figure 1 pin connector (Size and note are shown in Table 1) Table 1 Pin Connector Dimensions Code Mm Minimum value a - 4.18 Note 4 b - - Note 3 c 5.55 5.60 d - - Note 4 e 0.90 0.94 f - 0.30 g 0.00 0.25 h 0.00 0.25 i 1.27 - j - 2.54 k 5.45 5.55 Note 2 l 42° 48° angle m 7.40 7.60 n 8.00 - Note 1. Mechanical and electrical datums. Note 2. Reed, optional structure. Note 3. The dimensions are designed to meet the mechanical performance requirements. Note 4. Determine the “d” size according to the 50Ω characteristic impedance specified by the detailed specification and the diameter tolerance of the dimension “a”. 3.1.2 jack connector Figure 2 jack connector (Size and note are shown in Table 2) Table 2 Jack Connector Dimensions Code Mm Minimum value a - 4.18 Note 3 b 4.85 4.95 c 5.31 5.36 d - - Note 3 e - - Note 4 g 0.00 0.25 h 0.00 0.25 j 3.00 - k 5.60 - Note 2 l 8° 12° angle Note 1. Mechanical and electrical datums. Note 2. The design and location of the seal groove structure are optional and must meet electrical and environmental performance requirements. Note 3. The “d” size is determined according to the 50Ω characteristic impedance specified by the detailed specification and the diameter tolerance of the dimension “a”. Note 4. The design of the slotting is optional. When inserting into the center contact of the pin with a diameter of φ0.90~φ0.94, the mechanical and electrical performance requirements must be met. 3.2 Standard gauge 3.2.1 Standard Specification for Hub Connector Center Contact The unit is mm Figure 3 Standard Specification for the Center Connector of the Jack Connector (Size and note are shown in Table 3) Table 3 Standard dimensions for the center contact of the jack connector Code Standard gauge A (for stable size) Standard gauge B (for retention test) Standard gauge mass (weight). 28 2 0g Mm mm Minimum value, maximum value, minimum value a 0.940 0.945 0.899 0.902 b 0.76 1.14 1.27 1.90 Note. The material is polished steel with a surface roughness Ra ≤ 0.4 μm on the cylindrical surface of length b. 3.2.1.1 Test procedure Insert the standard gauge A into the center contact three times, the insertion depth is at least 0.76mm, which is a stable size operation, and should only be placed in the jack The center contact is taken out of the connector. Then, the standard gauge B is inserted into the center contact, and the standard gauge pullout force is greater than 0.28N. The center contact should be able to be protected in a vertical position Hold the weight of the standard gauge. This test can also be performed on a connector that does not remove the center contact. 3.2.2 Standard gauge for external contacts of pin connectors Figure 4 Standard gauge for the external contacts of the pin connector (Size and note are shown in Table 4) Table 4 Standard gauge dimensions for external contacts of pin connectors Code Standard gauge A (for stable size) Standard gauge B (for retention test) Standard gauge mass (weight). 56 2 0g Mm mm Minimum value, maximum value, minimum value a 5.360 5.365 5.305 5.310 b 4.85 4.95 4.85 4.95 c 2.50 - 2.50 - d 4.00 - 4.00 - e 5.60 - 5.60 - Note. The material is polished steel, and the surface roughness Ra on the cylindrical surface of length e is ≤ 0.4 μm. 3.2.2.1 Test procedure Insert the standard gauge A into the outer contact three times, which is a stable size operation. Then, the standard gauge B is inserted into the outer contact member, and the standard gauge pullout force is greater than 0.56N. The outer contact should be able to hold in the vertical position The weight of the standard gauge. 3.3 Dimensions - Standard Test Connector Size - 0 3.3.1 Pin Standard Test Connector The unit is mm Figure 5 pin standard test connector (Size and note are shown in Table 5) Table 5 Pin Standard Test Connector Size Code Mm Minimum value a 4.10 4.13 b - - Note 3 c 5.55 5.60 d nominal value 1.27 e 0.902 0.927 f - 0.30 g 0.00 0.15 h 0.00 0.15 i 1.27 1.37 j 2.03 2.29 k 5.45 5.55 l 42° 48° angle m 7.40 7.60 n 8.00 - Note 1. Mechanical and electrical datums. Note 2. Reed, optional structure. Note 3. The dimensions should be designed to meet the mechanical performance requirements. Note 4. The diameter selected is the diameter at which the dielectric constant of the PTFE medium is assumed to be 2.02 and the characteristic impedance of 50 Ω ± 0.5 Ω can be obtained. 3.3.2 Jack standard test connector The unit is mm Figure 6 jack standard test connector (Size and note are shown in Table 6) Table 6 Jack standard test connector size Code Mm Minimum value a 4.10 4.13 b 4.85 4.95 c 5.31 5.36 d nominal value 1.27 e - - Note 3 g 0.00 0.15 h 0.00 0.15 j 3.05 3.30 k 5.60 - l 8° 12° angle Note 1. Mechanical and electrical datums. Note 2. The diameter selected is the diameter when the dielectric constant of the PTFE medium is assumed to be 2.02 and the characteristic impedance of 50 Ω ± 0.5 Ω can be obtained. Note 3. The design of the slotting is optional. When inserting into the center contact of the pin with a diameter of φ0.902~φ0.927, the mechanical and electrical performance requirements must be met. 3.4 General requirements for connectors mounted on modules or panels 3.4.1 Limit values for allowable radial misalignment and axial displacement of the connector 3.4.1.1 General When designing the mounting arrangement of the RBMA series connectors, the arrangement of the single pair of connectors and their meshing are controlled in the following general limit conditions. It is a must. 3.4.1.2 Radial misalignment The radial misalignment between the pairs of mating connectors means that the two connectors are in the diameter c of the pin connector at the beginning of the insertion and during the insertion process. Center deviation between the centerline and the centerline of the diameter c of the jack connector (see 3.1). The radial misalignment of the fixedly mounted jack connector and the fixedly mounted pin connector should be in the process of starting the plugging and mating process. Within aa (0.095mm) (see Figure 7). Figure 7 Radial misalignment limits for fixed-mount jack connectors and fixed-mount pin connectors The radial misalignment of the fixedly mounted jack connector and the floating mounting pin connector should be in the range bb at the beginning of the plug-in Within (0.6mm) (see Figure 8). Figure 8 Radial misalignment limits for fixed-mount jack connectors and floating mount pin connectors During the insertion process, the floating mounted connector can be adjusted to a fixed range of connectors to within cc (0.095 mm) (see Figure 9). Figure 9 Floating Mounted Connector Self-Aligned 3.4.1.3 Axial displacement Fixed-mount socket connector and fixed-mount pin connector (see Figure 10), to ensure electrical and environmental performance after plug-in The joint gap of the two connectors should be no more than dd (0.38mm). If the gap between the two connector mating surfaces is dd (0.76mm), Will reduce electrical performance and invalidate environmental performance. Figure 10 Clearance between two reference faces Fixed-mount socket connector and floating-mounted pin connector (see Figure 11), floating mounting allows for axial total of ee (2.20mm) Displacement, and the installation configuration should ensure a minimum axial displacement of ee (0.20mm) to ensure that the total length of the meshing is maintained. Figure 11 Axial displacement limit 3.4.2 Special Connector Installation Rules In addition to the detailed description of the panel mounting dimensions and the maximum thickness of the panel, the detailed specification shall specify the minimum between two adjacent connector pairs. Centerline distance, including the X and Y directions (if not the same).

4 Quality assessment procedures

4.1 General 4.2~4.4 specifies the recommended ratings, characteristics and test conditions to be considered when preparing the detailed specification, and also specifies the minimum agreement. A list of tests applicable to the sampling level of the sex test, as well as a blank format for the detailed specification and guidelines for the development of detailed specifications. 4.2 Ratings and characteristics The following values (see Table 7) are recommended for the RBMA Series RF Coaxial Connectors and are intended for reference by the specifie......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11313.43-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11313.43-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11313.43-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11313.43-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.