GB/T 11313.101-2015 English PDFUS$509.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11313.101-2015: Radio-frequency connectors -- Part 101: Sectional specification for MMCX series RF coaxial connectors Status: Valid
Basic dataStandard ID: GB/T 11313.101-2015 (GB/T11313.101-2015)Description (Translated English): Radio-frequency connectors -- Part 101: Sectional specification for MMCX series RF coaxial connectors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L23 Classification of International Standard: 33.120.30 Word Count Estimation: 24,26 Date of Issue: 2015-06-02 Date of Implementation: 2016-02-01 Quoted Standard: GB/T 11313.1-2013 Regulation (derived from): National Standard Announcement 2015 No.19 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies two universal connector and 0 standard test connector mating interface dimensions, standard gauge testing requirements, rating and characteristics of the product, as well as in connection MMCX series from GB/T 11313.1-2013 selected application the list of all the detailed specification of test and inspection requirements. This section applies to MMCX RF connector series, which has a nominal impedance of 50��, the snap connection means, in the microwave transmission system is mainly used in connected with a variety of RF cable or microstrip. GB/T 11313.101-2015: Radio-frequency connectors -- Part 101: Sectional specification for MMCX series RF coaxial connectors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Radio-frequency connectors Part 101. Sectional specification for MMCX series RF coaxial connectors ICS 33.120.30 L23 National Standards of People's Republic of China RF Connectors Part 101. MMCX Series RF Coaxial connector specification Part 101. SectionalspecificationforMMCXseriesRFcoaxialconnectors Issued on. 2015-06-02 2016-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 mating interface and standard gauge 1 3.1 universal connector (Level 2) 1 3.1.1 Pin Connector 1 3.1.2 jack connector 2 3.2 standard gauge 4 3.2.1 jack connector center contact using a standard gauge 4 3.2.2 jack connector outer contact with the standard gauge 4 3.3 Standard Test Connectors (0) 6 3.3.1 Standard Test pin connector 6 3.3.2 Standard Test jack connector 7 4 8 quality assessment procedures 4.1 General 8 4.2 8 ratings and characteristics 4.3 List of test and inspection requirements 11 4.3.1 Settlement Test 11 4.3.2 Test cycle 12 4.3.3 Program 13 5 to develop a detailed specification of the guide 13 5.1 General 13 5.2 Detailed specification of identification 13 5.3 Identification of components 14 5.4 Performance 14 5.5 mark, order documents and related matters 14 Select 5.6 tests, test conditions and the severity of 14 5.7 MMCX Series RF coaxial connectors - Blank detail specification format 14ForewordIn GB/T 11313 "RF Connectors" have or plan to release the following sections. --- Part 1. Generic specification - General requirements and test methods (GB/T 11313.1-2013); --- Part 2. RF coaxial connectors 9.52 specification (GB/T 11313.2-2007); --- Part 3. balanced antenna feeder with two-pin connector; --- Part 4. inner diameter of outer conductor 16mm (0.63in), a characteristic impedance of 50Ω, threaded RF coaxial connectors (7-16 Type) (GB/T 11313.4-2007; IEC 60169-4. 1975, NEQ); Part --- Article 5. 96IEC 50-17 and larger cable specification for radio frequency coaxial connector; --- Part 6. 96IEC 75-17 and greater RF coaxial cable connector specification; Part --- Article 7. C Series RF coaxial connector specification; --- Part 8. inner diameter of the outer conductor 6.5mm (0.256in), a characteristic impedance of 50Ω (75Ω), RF coaxial connector bayonet connection Connector (BNC type) specification (GB/T 11313.8-2015); --- Part 9. SMC Series RF coaxial connector specification (GB/T 11313.9-2013); Part --- Article 10. SMB series RF coaxial connector specification (GB/T 11313.10-2012); --- Part 11. 4.1/9.5 series RF coaxial connector specification; Part --- Article 12. UHF series RF coaxial connectors specification; --- Part 13. inner diameter of the outer conductor 5.6mm (0.22in), mating with the same size of a characteristic impedance of 75Ω (1.6/5.6 Type) and a characteristic impedance of 50Ω (1.8/5.6 type) RF coaxial connector specification; --- Part 14. inner diameter of outer conductor 12mm (0.472in), a characteristic impedance of 75Ω, RF coaxial connectors with screw connection (3.5/12 type) specification; Part --- Article 15. SMA Series RF coaxial connector specification; --- Part 16. inner diameter of the outer conductor 7mm (0.276in), a characteristic impedance of 50Ω (75Ω), RF coaxial threaded connection Device (N-type) specification (GB/T 11313.16-2015); --- Part 17. inner diameter of the outer conductor 6.5mm (0.256in), a characteristic impedance of 50Ω, RF coaxial connectors with screw connection (TNC type) specification; Part --- Article 18. SSMA series RF coaxial connector specification (GB/T 11313.18-2013); Part --- Article 19. SSMB series RF coaxial connector specification (GB/T 11313.19-2013); --- Part 20. SSMC series RF coaxial connectors specification; Part --- Article 21. SC-A and SC-B Series Series RF coaxial connector specification; --- Part 22. BNO Series RF coaxial connector specification; --- Part 23. 3.5mm with rigid precision coaxial lines with the outer conductor inner diameter of 3.5mm (0.1378in) RF coaxial Connector specification; --- Part 24. 75Ω cable distribution systems connected by a threaded RF coaxial connector (F-type) (GB/T 11313.24-2013); --- Part 25. Connect the inner conductor double shielded symmetrical cable outer conductor inner diameter of 13.56mm (0.534in) of holes threaded connection Sectional specification; --- Part 26. TNCA series RF coaxial connectors specification; --- Part 27. 75Ω cable distribution systems with a threaded connection RF coaxial connectors (E-type) specification; --- Part 28. characteristic impedance of 75Ω, card lock connection, the outer conductor inner diameter of 5.60mm (0.220in) RF coaxial connector Specification; --- Part 29. characteristic impedance of 50Ω, a threaded, push-pull, quick lock or slide rack or panel connected RF Coaxial Device (1.0/2.3 type) specification; --- Part 31. inner diameter of the outer conductor 1.0mm (0.039in), the characteristic impedance of 50Ω, RF coaxial connector threaded connection (1.0 type) specification; --- Part 32. inner diameter of the outer conductor is 1.85mm (0.072in), the characteristic impedance of 50Ω, RF coaxial connector threaded connection (1.85 type) specification; Part --- Article 33. BMA RF coaxial connector specification (GB/T 11313.33-2001); --- Part 35. 2.92 Series RF coaxial connector specification; --- Part 36. characteristic impedance of 50Ω of the snap connection miniature RF coaxial connectors (MCX type) (GB/T 11313.36- 2006); Part --- Article 37. STWX8 Series RF coaxial connector specification (GB/T 11313.37-2015); --- Part 38. 50Ω back and slide-in module panel RF coaxial connector (TMA type) specification; --- Part 39. CQM series quick lock RF coaxial connectors specification; --- Part 40. RF coaxial connectors series 2.4 specification; --- Part 41. CQA series quick lock RF coaxial connectors specification; --- Part 42. CQN series quick lock RF coaxial connectors specification; Part --- Article 43. RBMA series blind mating RF coaxial connectors specification; Part --- Article 44. SMP series RF coaxial connectors specification; Part --- Article 45. SQMA series quick lock RF coaxial connectors specification; --- Part 47. Fquick series 75Ω cable distribution systems specification for plug-in radio frequency coaxial connector; Part --- Article 48. BMP series blind mating RF coaxial connectors specification; Part --- Article 49. SMAA series RF coaxial connectors specification; This section GB/T 11313 Part 101. This section drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190). This section drafted by. China Electronics Standardization Institute, Xi'an Fujitec Technology Co., Ltd. The main drafters of this section. Wu Zhengping, Li Yabo, Yangqiu Li, Wuxiang Wen. RF Connectors Part 101. MMCX Series RF Coaxial connector specification1 ScopeGB/T 11313 provisions of this part of the level 2 and 0 universal connector standard test connector mating interface dimensions, gauges detection All the requirements, ratings and characteristics of the product, and the series of connectors from GB/T 11313.1-2013 selected applies to MMCX Detailed specification of the test schedule and inspection requirements. This section presents the development MMCX Series RF coaxial connector detail specification and content rules, and blank detail specification format. This section shows the recommended performance characteristics when preparing a detailed specification should be considered, including the M-Class and H-level assessment level List of test and inspection requirements. This section applies to MMCX RF connector series, which has a nominal impedance of 50Ω, the snap connection means, in a microwave transmission system Mainly used for a variety of RF mating cable or microstrip. This connection uses the highest frequency up to 6GHz. This part of the original size in millimeters, not all graphics NOTE size structure for reference only.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 11313.1-2013 RF connectors - Part 1. Generic specification - General requirements and test methods (IEC 61169-1. 1998, IDT)3 mating interface and standard gauge3.1 universal connector (Level 2) 3.1.1 pin connector Pin connector interface shown in Figure 1, the size of Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11313.101-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 11313.101-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11313.101-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11313.101-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
