|
Std ID |
Description (Standard Title) |
|
GB/T 25078.1-2010
|
Acoustics -- Recommended practice for the design of low-noise machinery and equipment -- Part 1: Planning
|
|
GB/T 25078.2-2010
|
Acoustics -- Recommended practice for the design of low-noise machinery and equipment -- Part 2: Introduction to the physics of low noise design
|
|
GB/T 25079-2010
|
Acoustics -- Application of new measurement methods in building and room acoustics -- MLS and SS methods
|
|
GB/T 25080-2010
|
Niobium-titanium alloy billet, bar and rod for superconducting applications
|
|
GB/T 2508-1989
|
Marine combination pipe flanges, slip-on steel outer flanges, fillet weld-on steel inner flanges
|
|
GB/T 25082-2010
|
Specification and technical requirements of oil-immersed-convertor transformers for 800 kV DC applications
|
|
GB/T 25083-2010
|
Metal-oxide surge arresters without gaps for ±800kV UHVDC systems
|
|
GB/T 25084-2010
|
Insulator strings and sets for overhead lines with a nominal voltage greater than 1000 V -- AC power arc tests
|
|
GB/T 25085-2010
|
Road vehicles. 60V and 600V single-core cables
|
|
GB/T 25086-2010
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles. 7-pole connector type 12S (supplementary) for vehicles with 12V nominal supply voltage
|
|
GB/T 10357.5-2011
|
Test of mechanical properties of furniture -- Part 5: Strength and durability of storage units
|
|
GB/T 25088-2010
|
Road vehicles - Connectors for the electrical connection of towing and towed vehicles. 7-pole connector type 24S (supplementary) for vehicles with 24V nominal supply voltage
|
|
GB/T 10357.6-1992
|
Test of mechanical properties of furniture--Strength and durability of beds
|
|
GB/T 25090-2010
|
Step-down power saving device for asynchronous motor at light load
|
|
GB/T 25091-2010
|
High-voltage direct-current disconnectors and earthing switches
|
|
GB/T 2509-1981
|
Copper alloy integrated shaft sleeves for plain bearings--Types, dimensions and tolerance
|
|
GB/T 25092-2010
|
Dry-type air-core smoothing reactors for HVDC applications
|
|
GB/T 25093-2010
|
AC filters for HVDC systems
|
|
GB/T 25094-2010
|
General technical specification of corrective maintenance tower for overhead transmission line
|
|
GB/T 25095-2010
|
Monitoring system of operating status for overhead transmission lines
|
|
GB/T 25096-2010
|
Composite station post insulators for substations with AC voltages greater than 1000V -- Definitions, test methods and acceptance criteria
|
|
GB/T 25097-2010
|
Insulating live-working washing agent
|
|
GB/T 25098-2010
|
Live washing regulation of insulating live-working washing agent
|
|
GB/T 25099-2010
|
Step-down power saving device on distribution networks
|
|
GB/T 25100-2010
|
Information and documentation -- The Dublin core metadata element set
|
|
GB/T 2510-1981
|
Copper alloy integrated shaft sleeves for plain bearings with gears--Types, dimensions and tolerances
|
|
GB/T 25102.100-2010
|
Electroacoustics -- Hearing aids -- Part 0: Measurement of electroacoustic characteristics
|
|
GB/T 25102.1-2010
|
Electroacoustics -- Hearing aids -- Part 1: Hearing aids with induction pick-up coil input
|
|
GB/T 25102.13-2010
|
Electroacoustics -- Hearing aids -- Part 13: Electromagnetic compatibility (EMC)
|
|
GB/T 25102.2-2010
|
Electroacoustics -- Hearing aids -- Part 2: Hearing aids with automatic gain control circuits
|
|
GB/T 25102.4-2010
|
Electroacoustics -- Hearing aids -- Part 4: Induction loop systems for hearing aid purposes -- Magnetic field strength
|
|
GB/T 25103-2010
|
Supply chain management business reference model
|
|
GB/T 25104-2010
|
Crude oil-automatic determination of water -- RF method
|
|
GB/T 25105.1-2014
|
Industrial communication networks -- Fieldbus specifications -- Type 10: PROFINET IO specifications -- Part 1: Application layer service definition
|
|
GB/T 25105.2-2014
|
Industrial communication networks -- Fieldbus specifications -- Type 10 PROFINET IO specifications -- Part 2: Application layer protocol specification
|
|
GB/T 25105.3-2014
|
Industrial communication networks -- Fieldbus specifications -- Type 10: PROFINET IO specifications -- Part 3: PROFINET 10 communication profile
|
|
GB/T 25106-2010
|
Torsion balance
|
|
GB/T 25107-2010
|
Mechanical balance
|
|
GB/T 25108-2010
|
Function specification for three-dimensional CAD software
|
|
GB/T 25109.1-2010
|
Enterprise resource planning -- Part 1: ERP terms
|
|
GB/T 25109.2-2010
|
Enterprise resource planning -- Part 2: ERP foundational data
|
|
GB/T 25109.3-2010
|
Enterprise resource planning -- Part 3: Functional component of ERP
|
|
GB/T 25109.4-2010
|
Enterprise Resource Planning -- Part 4: ERP system architecture
|
|
GB/T 25110.1-2010
|
Industrial automation systems and integration -- Distributed installation in industrial applications -- Part 1: Sensors and actuators
|
|
GB/T 25110.2-2010
|
Industrial automation systems and integration -- Distributed installation in industrial application -- Part 2: Hybrid communication bus
|
|
GB/T 25110.3-2010
|
Industrial automation systems and integration -- Distributed installation in industrial application -- Part 3: Power distribution bus
|
|
GB/T 25111-2010
|
Networked manufacturing environment -- Manufacturing resource class
|
|
GB/T 2511-1981
|
Copper alloy integrated shaft sleeves--Technical requirements
|
|
GB/T 25112-2010
|
Pressure gauge used in welding, cutting and allied processes
|
|
GB/T 25114.3-2010
|
ebXML based business message -- Part 3: Core order
|
|
GB/T 25117.1-2010
|
Railway applications -- Rolling stock -- Combined testing -- Part 1: Combined testing of inverter-fed alternating current motors and their control system
|
|
GB/T 25117.2-2010
|
Railway applications -- Rolling stock -- Combined testing -- Part 2: Combined testing of chopper-fed direct current traction motors and their control system
|
|
GB/T 25117.3-2010
|
Railway applications -- Rolling stock -- Combined testing -- Part 3: Combined testing of alternating current motors, fed by an indirect converter, and their control system
|
|
GB/T 25118-2010
|
Railway applications -- Electric equipment for rolling stock -- Rules for power resistors of open construction
|
|
GB/T 25119-2010
|
Railway applications -- Electronic equipment used on rail vehicles
|
|
GB/T 251-2008
|
Textiles -- Tests for colour fastness -- Grey scale for assessing staining
|
|
GB/T 25120-2010
|
Railway applications -- Traction transformers and inductors on board rolling stock
|
|
GB/T 25121-2010
|
Railway applications -- Rolling stock equipment -- Capacitors for power electronics
|
|
GB/T 25122.1-2010
|
Railway applications -- Power convertors installed on board rolling stock -- Part 1: Characteristics and test methods
|
|
GB/T 25122.2-2010
|
Railway applications -- Power convertors installed on board rolling stock -- Part 2: Additional technical information
|
|
GB/T 25123.1-2010
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors
|
|
GB/T 25123.2-2010
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 2: Electronic convertor-fed alternating current motors
|
|
GB/T 25123.3-2011
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
|
|
GB/T 25123.4-2015
|
Electric traction -- Rotating electrical machines for rail and road vehicles -- Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
|
|
GB/T 25124-2010
|
Specification for executive search service
|
|
GB/T 25125-2010
|
Intelligent power saving device for lighting
|
|
GB/T 25126-2010
|
Large capacity cross-electromagnetic four-way reversing valve
|
|
GB/T 25127.1-2010
|
Low ambient temperature air source heat pump (water chilling) packages -- Part 1: Heat pump (water chilling) packages for industrial and commercial and similar application
|
|
GB/T 10357.6-2013
|
Test of mechanical properties of furniture -- Part 6: Strength and durability of beds
|
|
GB/T 25128-2010
|
Direct evaporation all fresh air handling units
|
|
GB/T 25129-2010
|
Unit coolers for refrigeration
|
|
GB/T 25132-2010
|
Hydraulic fluid power -- Filters -- Test method for differential pressure devices
|
|
GB/T 25133-2010
|
Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing
|
|
GB/T 25134-2010
|
Optical measurement specification of 3D geometry for forgings/stampings and the dies
|
|
GB/T 25135-2010
|
The quality control criterion of forging technology
|
|
GB/T 25136-2010
|
General checking standard for steel open die forgings
|
|
GB/T 25137-2010
|
Titanium and titanium alloy forgings
|
|
GB/T 25138-2010
|
Standard sand for checking foundry binder
|
|
GB/T 25139-2010
|
Ceramic foam filter for foundry
|
|
GB/T 25140-2010
|
Seal-less rotodynamic pumps -- Class II -- Specification
|
|
GB/T 25141-2010
|
Self-priming type rotodynamic pumps -- Types and basic parameters
|
|
GB/T 2514-1993
|
Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
|
|
GB/T 2514-2008
|
Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
|
|
GB/T 25142-2010
|
Air-cooled circulating cooling liquid refrigerating packages
|
|
GB/T 25143-2010
|
Specification of moulds for vacuum thermoforming
|
|
GB/T 25144-2010
|
Determination of coefficient of mean linear thermal expansion for vitreous and porcelain enamels
|
|
GB/T 25145-2010
|
Terminology of agitating equipment
|
|
GB/T 25146-2010
|
Quality acceptance specifications of chemical cleaning for industrial equipment
|
|
GB/T 25147-2010
|
Test method of metal corrosion amount and corrosion rate of chemical cleaning for industrial equipment -- Gravimetric method
|
|
GB/T 25148-2010
|
Test methods of scale removal rate and detergence rate of chemical cleaning for industrial equipment
|
|
GB/T 25149-2010
|
Quality test method of passive film on carbon steel of chemical cleaning for industrial equipment -- Red dot method
|
|
GB/T 25150-2010
|
Quality test method of passive film on austenitic stainless steel of chemical cleaning for industrial equipment -- Blue dot method
|
|
GB/T 25151.1-2010
|
Fabrication and inspection method for high pressure urea equipment -- Part 1: Ultrasonic examination on the automatic strip overlay welds of stainless steel
|
|
GB/T 25151.2-2010
|
Fabrication and inspection method for high pressure urea equipment -- Part 2: Selective corrosion examination and metallography examination for ultra-low carbon chromated nickel molybdenum austenitic stainless steel of urea grade
|
|
GB/T 25151.3-2010
|
Fabrication and inspection method for high pressure urea equipment -- Part 3: Intergranular corrosion tendency test for ultra-low carbon chromated nickel molybdenum austenitic stainless steel of urea grade
|
|
GB/T 25151.4-2010
|
Fabrication and inspection method for high pressure urea equipment -- Part 4: Intergranular corrosion tendency test specimen preparation for ultra-low carbon chromated nickel molybdenum austenitic stainless steel of urea grade
|
|
GB/T 25151.5-2010
|
Fabrication and inspection method for high pressure urea equipment -- Part 5: Ammonia leakage test method for urea high pressure equipment
|
|
GB/T 25151.6-2014
|
Fabrication and inspection method for high pressure urea equipment -- Part 6: Helium leakage test method for urea high pressure equipment
|
|
GB/T 25152-2010
|
Specification for liquid-liquid hydro-cyclone separators
|
|
GB/T 25153-2010
|
Chemical industry pressure vessel used magnetic-float type level gauge
|