GB/T 25111-2010 English PDFUS$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25111-2010: Networked manufacturing environment -- Manufacturing resource class Status: Valid
Basic dataStandard ID: GB/T 25111-2010 (GB/T25111-2010)Description (Translated English): Networked manufacturing environment -- Manufacturing resource class Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J17 Classification of International Standard: 35.240.50 Word Count Estimation: 17,122 Date of Issue: 2010-09-02 Date of Implementation: 2010-12-01 Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the characteristics of networked manufacturing resources and environment. Analyzes the relationship between networked manufacturing environment and the characteristics of the importance of resource management and resource management and resource classification proposed several classification methods and classification. This standard applies to enterprises to implement networked manufacturing process to classify and resource management in networked environments manufacturing resources. GB/T 25111-2010: Networked manufacturing environment -- Manufacturing resource class---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Networked manufacturing environment. Manufacturing resource class ICS 35.240.50 J07 National Standards of People's Republic of China Manufacturing Resource Classification Networked Manufacturing Environment Issued on. 2010-09-02 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Terms and definitions 1 3 Networked Manufacturing Resource concepts 5 3.1 resource classification and Resource Management 5 Basic requirements 3.2 Classification of 5 4 6 Resource classification 4.1 Several Networked Manufacturing 6 4.2 Classification System 6 Appendix A (informative) Networked Manufacturing 9 Reference 12ForewordThe standard proposed by China Machinery Industry Federation. The standard automation systems and integration by the National Standardization Technical Committee (SAC/TC159) centralized. This standard is drafted by. Beijing Machinery Industry Automation Research Institute, Tongji University CIMS Research Center. The main drafters of this standard. Wang Jian, Daiyi Ru, Sun Jie incense.IntroductionThis standard is to define its resources in accordance with the manufacturing network involved in the product life cycle. Resources Networked Manufacturing Environment include. Material and energy resources (materials, products, equipment, energy, etc.), information resources, human resources, technical resources, financial and other resources. With the traditional system By making resources compared to resources networked manufacturing environment has expanded, increasing the content of the resource network components. Resources covered by this standard only in the range of networked manufacturing environment, the range of the network manufacturing involves. Contemporary Integrated Manufacturing System (CIMS), flexible manufacturing, advanced manufacturing (AM), automated manufacturing, dispersed network manufacturing, agile manufacturing, virtual manufacturing companies and large-scale Custom manufacturing and workflow. Network-related manufacturing resource standards. GB/T 5271 "Information technology - Vocabulary", GB/T 15312 "system Building automation industry term ", GB/T 16978" Industrial Automation vocabulary. " Chapter 2 of this standard the terms and definitions given in total 39; Chapter 3 gives networked manufacturing resources and related concepts and characteristics; 4th Chapter gives resource classification method and basis; and finally a partial list of relevant references. The presentation of this standard, according to the manufacturing resources in networked manufacturing environment classify each category in order of importance resource row team. With the development of manufacturing technology and network technology, network resource manufacturing environment increasingly rich, sorted by category and find resources in favor Future expansion. Manufacturing Resource Classification Networked Manufacturing Environment1 ScopeThis standard describes the characteristics of networked manufacturing resources and environment, analyzes the importance of networked manufacturing resources management and environment Characteristics and the relationship between resource management and resource classification, proposed several classification methods and classification. This standard applies to enterprises networked manufacturing process of classification and resource management in networked environments manufacturing resources.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 Raw materials rawmaterial General and major raw materials. After processing in the production process to change its form or nature and constitute the main products of various physical entities Funding. Including. raw materials and main materials, auxiliary materials, purchased semi-finished products, repair parts, packaging materials, fuel. 2.2 Rough semi-finishedmaterials After one kind of the raw material, the same material as used in the production process. Its properties and raw material is basically the same, but the ratio of raw material aging Short, only for a certain category of products. 2.3 Semi-finished semi-manufacturedgoods Industrial enterprises have completed one or several workshop workshop production process, has been acceptance of storage, but still needs to be present in other companies Workshop for processing or assembling products. 2.4 Products product Broadly speaking companies also belong to the final product of the enterprise resources, the number and value of this resource can be calculated, but aging is zero, because It is within the enterprise is no longer any need to go through the circulation. Technical content is determined by the production processes and technologies involved. Other property indicators ignore. General business products are not only one, but many, depending on the circumstances specific segments. 2.5 Machine tools Metal or other material blank or workpiece machining, and thus obtain the desired geometric shape, dimensional accuracy and surface quality of the machine Device. Longer aging, mobility, high technical content. 2.6 Production line productline Production process through which the route, that is, into the production site from raw materials, through processing, transport, assembly, inspection and a series of green Production activities constitute route. 2.7 Network Hardware networkhardware Collaborative design, collaborative manufacturing, and information sharing are inseparable from the enterprise network environment, network environment consists of both hardware and software together constitute the hardware Including computers, routers/switches, cables, and other peripherals. High technology content, high value, liquidity is relatively large development potential. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25111-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25111-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25111-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25111-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
