|
Std ID |
Description (Standard Title) |
|
GB/T 24171.1-2009
|
Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop
|
|
GB/T 24171.2-2009
|
Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory
|
|
GB/T 2417-1981
|
Breeding stock--Jinhua pigs
|
|
GB/T 2417-2008
|
Jinhua pig
|
|
GB/T 24172-2009
|
Method for evaluation of tensile properties of metallic superplastic materials
|
|
GB/T 24173-2009
|
Steel sheets -- Secondary work embrittlement testing method
|
|
GB/T 10335.2-2005
|
Coated paper and board -- Light-weight coated paper
|
|
GB/T 24174-2009
|
Steel -- Determination of Bake-Hardening-Index (BH2)
|
|
GB/T 24175-2009
|
Test method for stability of steel slag
|
|
GB/T 24176-2009
|
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
|
|
GB/T 24177-2009
|
Standard test methods for characterizing duplex grain sizes
|
|
GB/T 24178-2009
|
Macrostructure assessing method for solidification structure of continuous casting blank
|
|
GB/T 24179-2009
|
Metallic materials -- Residual stress determination -- The indentation strain-gage method
|
|
GB/T 24180-2009
|
Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip
|
|
GB/T 24181-2009
|
Steels for diamond welded saw blades
|
|
GB/T 2418-1981
|
Breeding stock--Neijiang pigs
|
|
GB/T 24182-2009
|
Mechanical testing of metals -- Symbols and definitions in published standard
|
|
GB/T 24183-2009
|
Metallic materials -- Earing test
|
|
GB/T 24184-2009
|
high calcium hot melt slag after desulphurization for sintering flux
|
|
GB/T 24185-2009
|
Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method
|
|
GB/T 10335.3-2004
|
Coated paper and board -- Coated ivory board
|
|
GB/T 24187-2009
|
Cold-drawn precision single welded steel tubes
|
|
GB/T 24189-2009
|
Iron ores for blast furnace feedstocks -- Determination of the reducibility by the final degree of reduction index
|
|
GB/T 24190-2009
|
Iron ores -- Determination of combined water -- Karl Fischer method
|
|
GB/T 24191-2009
|
Steel wire ropes -- Determination of the actual modulus of elasticity
|
|
GB/T 2419-1994
|
Test method for fluidity of cement mortar
|
|
GB/T 2419-2005
|
Test method for fluidity of cement mortar
|
|
GB/T 24192-2009
|
Chromium ores -- Determination of particle size by sieving
|
|
GB/T 24193-2009
|
Chromium ores and concentrates -- Determination of aluminium, iron, magnesium and silicon content -- Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 24194-2009
|
Ferrosilicon - Determination of aluminum, calcium, manganese, chromium, titanium, copper, phosphorus and nickel content - Inductively coupled plasma atomic emission spectrometric method
|
|
GB/T 24195-2009
|
Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions
|
|
GB/T 24196-2009
|
Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
|
|
GB/T 24197-2009
|
Manganese Ores - Determination of Iron, Silicon, Aluminum, Calcium, Barium, Magnesium, Potassium, Copper, Nickel, Zinc, Phosphorus, Cobalt, Chromium, Vanadium, Arsenic, Lead, Titanium and Vanadium - Inductively Coupled Plasma Atomic Emission Spectrometry
|
|
GB/T 24-1976
|
Bolts, small hexagon head with fit neck and hole through the shank
|
|
GB/T 10335.4-2004
|
Coated paper and board -- Coated folding board
|
|
GB/T 24199-2009
|
Refined pyridine -- Determination of pyridine content -- Gas chromatographic method
|
|
GB/T 24200-2009
|
Determination of phenol and homologues contents of crude phenol
|
|
GB/T 24201-2009
|
Test method for corrosion resistance of blast furnace brick to pig iron
|
|
GB/T 2420-1981
|
Rapid test for sulphate resistance of cement
|
|
GB/T 24202-2009
|
Carbon steel wire for optical fiber cable tension members
|
|
GB/T 24203-2009
|
Carbon materials -- Determination of the true density or true porous -- Boiling method
|
|
GB/T 24204-2009
|
Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by dynamic method
|
|
GB/T 24205-2009
|
Iron ores fines -- Method for presentation the results of sintering test
|
|
GB/T 24206-2009
|
Determination of crystallized matter at 15 Celsius of washing oil
|
|
GB/T 24207-2009
|
Determination of the phenol content of washing oil
|
|
GB/T 24208-2009
|
Determination of the naphthalene content of washing oil
|
|
GB/T 24209-2009
|
Determination of the viscosity of washing oil
|
|
GB/T 2421.1-2008
|
Environmental testing for electric and electronic products -- General and guidance
|
|
GB/T 2421.2-2008
|
Environment test for electrical and electronic products -- Regulating the information usage of programmers -- Test studies
|
|
GB/T 24210-2009
|
Test method for the elastic modulus of whole graphite electrodes -- Velocity of sound
|
|
GB/T 24211-2009
|
Anthracene oil
|
|
GB/T 2421-1989
|
Basic environmental testing procedures for electric and electronic products--General and guidance
|
|
GB/T 2421-1999
|
Environmental testing for electric and electronic products Part 1: General and guidance
|
|
GB/T 24212-2009
|
Methylnaphthalene oil
|
|
GB/T 24213-2009
|
General rules for original position statistic distribution analysis method
|
|
GB/T 24214-2009
|
Quick determination method of water content in coal tar
|
|
GB/T 24215-2009
|
Hot-dip galvanized steel wires for bridge cables wrap
|
|
GB/T 24216-2009
|
Light oil
|
|
GB/T 24217-2009
|
Washing oil
|
|
GB/T 24218.101-2010
|
Textiles -- Test methods for nonwovens -- Part 101: Saline repellency (Mason jar method)
|
|
GB/T 24218.10-2016
|
Textiles -- Test methods for nonwovens -- Part 10: Lint and other particles generation in the dry state
|
|
GB/T 24218.11-2012
|
Textiles -- Test methods for nonwovens -- Part 11: Run-off
|
|
GB/T 24218.1-2009
|
Textiles -- Test methods for nonwovens -- Part 1: Determination of mass per unit area
|
|
GB/T 24218.12-2012
|
Textiles -- Test methods for nonwovens -- Part 12: Demand absorbency
|
|
GB/T 24218.13-2010
|
Textiles -- Test methods for nonwovens -- Part 13: Repeated liquid strike-through time
|
|
GB/T 24218.14-2010
|
Textiles -- Test methods for nonwovens -- Part 14: Cover stock wetback
|
|
GB/T 24218.18-2014
|
Textiles -- Test methods for nonwovens -- Part 18: Determination of breaking strength and elongation (grab method)
|
|
GB/T 24218.2-2009
|
Textiles -- Test methods for nonwovens -- Part 2: Determination of thickness
|
|
GB/T 10335.5-2008
|
Coated paper and board -- Coated linerboard
|
|
GB/T 24218.5-2016
|
Textiles -- Test methods for nonwovens -- Part 5: Determination of resistance to mechanical penetration (ball burst method)
|
|
GB/T 24218.6-2010
|
Textiles -- Test methods for nonwovens -- Part 6: Absorption
|
|
GB/T 24218.8-2010
|
Textiles -- Test methods for nonwovens -- Part 8: Determination of liquid of liquid strike-through time (simulated urine)
|
|
GB/T 24219-2009
|
Determination of ebullition aperture of woven filtering fabric
|
|
GB/T 242-1982
|
Method for flaring test on tubes of metals
|
|
GB/T 242-1997
|
Metallic materials--Tube--Drift expanding test
|
|
GB/T 242-2007
|
Metal materials -- Tube -- Drift-expending test
|
|
GB/T 24220-2009
|
Chromium ores -- Determination of hygroscopic moisture content in analytical samples -- Gravimetric method
|
|
GB/T 24221-2009
|
Chromium ores -- Determination of calcium and magnesium contents -- EDTA titrimetric method
|
|
GB/T 2422-1995
|
Environmental testing for electric and electronic products. Terms and definitions
|
|
GB/T 2422-2012
|
Environmental testing -- Guide to drafting of test methods -- Terms and definitions
|
|
GB/T 24222-2009
|
Chromium ores -- Determination of moisture of lots
|
|
GB/T 24223-2009
|
Chromium ores -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
|
|
GB/T 24224-2009
|
Chromium ores -- Determination of sulfur content -- Combustion-neutralization titration method, combustion-potassium iodate titration method and combustion-infrared absorption method
|
|
GB/T 24225-2009
|
Chromium ores -- Determination of total iron content -- Titrimetric method after reduction
|
|
GB/T 24226-2009
|
Chromium ores and concentrates -- Determination of calcium contents -- Flame atomic absorption spectrometric method
|
|
GB/T 24227-2009
|
Chromium ores and concentrates -- Determination of silicon content -- Spectrophotometric method and gravimetric method
|
|
GB/T 24228-2009
|
Chromium ores and concentrates -- Methods of chemical analysis -- General instruction
|
|
GB/T 24229-2009
|
Chromium ores and concentrates -- Determination of aluminium content -- Complexometric method
|
|
GB/T 2423.101-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test: inclinations and swings
|
|
GB/T 2423.10-1995
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fc and guidance: Vibration (Sinusoidal)
|
|
GB/T 10335-1995
|
Art Paper
|
|
GB/T 2423.102-2008
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test: Combined temperature (cold and heat) / low air pressure / vibration (sinusoidal)
|
|
GB/T 2423.11-1997
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fd: Random vibration wide band - General requirements
|
|
GB/T 2423.1-1989
|
Basic environmental testing procedures for electric and electronic products - Tests A: Cold
|
|
GB/T 2423.1-2001
|
Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
|
|
GB/T 10336-1989
|
Method of determination of fiber length for papermaking
|
|
GB/T 2423.12-1982
|
Basic environmental testing procedures for electric and electronic products - Test Fda: Random vibration wide band - Reproducibility high
|
|
GB/T 2423.12-1997
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fda: Random vibration wide band - Reproducibility high
|
|
GB/T 2423.13-1982
|
Basic environmental testing procedures for electric and electronic products - Test Fdb: Random vibration wide band - Reproducibility medium
|
|
GB/T 2423.13-1997
|
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fdb: Random vibration wide band - Reproducibility medium
|