GB/T 24215-2009 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24215-2009: Hot-dip galvanized steel wires for bridge cables wrap Status: Valid
Basic dataStandard ID: GB/T 24215-2009 (GB/T24215-2009)Description (Translated English): Hot-dip galvanized steel wires for bridge cables wrap Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H49 Classification of International Standard: 77.140.65 Word Count Estimation: 6,625 Date of Issue: 2009-07-08 Date of Implementation: 2010-04-01 Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides a bridge between the main cable is wound round with a low carbon galvanized wire size, shape and tolerances, technical requirements, test methods, acceptance criteria, packaging, marking and quality certification, storage and transport. This standard applies to suspension, cable-stayed bridge, the main cable is wound round with a low carbon galvanized steel wire (hereinafter referred to as wire). GB/T 24215-2009: Hot-dip galvanized steel wires for bridge cables wrap---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Hot-dip galvanized steel wires for bridge cables wrap ICS 77.140.65 H49 National Standards of People's Republic of China Bridge main cable is wound round with a low carbon galvanized steel wire Posted 2009-07-08 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. Drafting of this standard. Guizhou Wire Rope Co., Fasten Group, Highway Planning and Design Institute Limited, the rule of Metallurgical Industry Information Standards Institute. The main drafters of this standard. Huang canal Linde, Dong Dong, Meng Chao, Peng sports, Wangling Jun, Dai Danfeng. Bridge main cable is wound round with a low carbon galvanized steel wire1 ScopeThis standard specifies the bridge main cable is wound round with a low carbon galvanized wire size, shape and tolerances, technical requirements, test methods, test Income rules, packaging, marking and quality certification, storage and transportation. This standard applies to suspension bridges, cable-stayed bridge with a main cable is wound round a low carbon galvanized steel wire (hereinafter referred to as wire).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard. However, according to research encourages the parties to the agreement Study whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 228 metal materials at room temperature tensile test method GB/T 238 metal wire repeated bending test method for materials GB/T 239 metal wire torsion test method GB/T 470-2008 zinc GB/T 701 low carbon steel hot rods GB/T 1839 quality steel products galvanizing layer test method GB/T 2103-2008 General provisions wire acceptance, packaging, marking and quality certificate GB/T 2976 Standard Test Method for winding a metal wire material GB/T 4354 quality carbon steel hot rod GB/T 8653 Metal Young's modulus, chord modulus, tangent modulus and Poisson's ratio test method (static method)3 order contentsContract in accordance with this standard orders should include the following elements. 1) number of this standard; 2) the product name; 3) product specifications; 4) Quantity (by weight); 5) tensile strength; 6) other requirements. 4 size, shape, weight and tolerance 4.1 Dimensions Wire nominal diameter, roundness tolerances and shall comply with the requirements of Table 1. Table 1 wire diameter and roundness in millimeters 4.2 Outline 4.2.1 Each dish should be composed of a wire, cable tray application obvious signs marked wire head position. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24215-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24215-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24215-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24215-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
