GB/T 24171.1-2009 English PDF

US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24171.1-2009: Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24171.1-2009	214	Add to Cart	3 days	Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop	Valid

Similar standards

GB/T 24174   GB/T 24523   GB/T 24173   GB/T 24179   GB/T 24171.2   

Basic data

Standard ID: GB/T 24171.1-2009 (GB/T24171.1-2009)
Description (Translated English): Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H22
Classification of International Standard: 77.040.10
Word Count Estimation: 11,137
Date of Issue: 2009-06-25
Date of Implementation: 2010-04-01
Adopted Standard: ISO 12004-1-2008, IDT
Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the forming limit diagram metal strip and forming limit curves determination. This section applies to the thickness of the metal sheet 0. 3 mm ~ 4 mm and a thin strip.

GB/T 24171.1-2009: Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Metallic materials Sheet and strip Determination of forming limit curves Part 1. Measurement and application of forming limit diagrams in press shop ICS 77.040.10 H22 National Standards of People's Republic of China GB/T 24171.1-2009/ISO 12004-1.2008 Metallic materials - Sheet and strip - Determination of forming limit curve Part 1. press shop FLD Measurement and Application (ISO 12004-1.2008, IDT) Posted 2009-06-25 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 24171 "Determination limit curves of metallic materials - Sheet and strip forming" is divided into two parts. --- Part 1. press shop Forming Limit Diagram Measurement and Application; --- Part 2. Laboratory determination of forming limit curves. This section GB/T 24171 Part 1. This section is equivalent international standards ISO 12004-1.2008 "metal thin material Plate and strip - Determination of forming limit curves - Part 1. press shop FLD measurement and Applications "(in English). For ease of use, this section made the following changes. a) "this International Standard" be replaced by "this section"; b) use a decimal point instead of a decimal comma ",". ","; c) Remove the preface to the international standards; d) a reference to the file by pressing the corresponding national standards were changed; e) The number "5.1.7,5.1.8,5.1.9" to "5.1.6.1,5.1.6.2,5.1.6.3" to make it more logical; f) in Appendix A, Appendix B to change to make the text a reference to the order in line with the habit. This section of the Appendix A, Appendix B is an informative annex. This part is proposed by the China Iron and Steel Association. This part of the National Steel Standardization Technical Committee. This section is drafted. Wuhan Iron and Steel (Group) Company, Shanghai Exit Inspection and Quarantine. The main drafters of this section. IRON Zhu Hongchuan, Chen Shihua, Should macros, Wu Yiwen, Long Yan, Du shadow. GB/T 24171.1-2009/ISO 12004-1.2008

Introduction

Forming Limit Diagram (FormingLimitDiagram/FLD) --- contains the main strain/time graph main strain point. FLD can distinguish a strain value is safe or broken for some materials, from the security point to the breaking point the boundaries set Defined as the forming limit curve. There are two different methods can be determined forming limit of materials. 1) Hedge waste parts strain analysis, measurement and shape of the part and process related FLCs. In the press shop, strain path of these points is usually unknown, dependent on the forming limit curve FLC materials, parts and selected in The molding conditions. This method, see Part 1 of this standard. 2) FLCs under perfect laboratory conditions measured. In order to evaluate its formability, only need to draw the forming limit curve FLC for a given material. The standard measure of the FLC Constant need to use different linear strain paths. This method can be applied to materials characterization, see Part 2 of this standard. GB/T 24171.1-2009/ISO 12004-1.2008 Metallic materials - Sheet and strip - Determination of forming limit curve Part 1. press shop FLD Measurement and Application

1 Scope

This section GB/T 24171 specifies the method for determination of forming limit diagram of the metal strip and forming limit curve. This section applies to a thickness of 0.3mm ~ 4mm metal sheet and strip.

2 Symbols and

The symbols used in this section and are listed in Table 1, the sample for measuring the mesh forming limit diagram in Appendix A. Table 1 Symbols and Symbol Description Unit FLD FLD - FLC FLC - Principle 3 First, the surface of the metal sheet specimen printed fine grid of suitable size, then the sample is shaping up to rupture. By measuring the net Grid size and the percentage change in the principal strain direction perpendicular to the direction of strain in the second to give to the forming limit strain under constant strain state value. Repeat the test strain state of change can be a series of strain data, strain data are plotted in these Forming Limit Diagram (FLD) on it Can be obtained forming limit curve (FLC) (see Figure 1).

4 Test conditions

4.1 Recommendation mesh size in 1.5mm ~ 5mm between error and the true size of the grid between the nominal value shall be ± 2% Fewer. 4.2 during the forming process of the sample, the critical strain measurement area in front of the neck should be kept uniform. 4.3 To meet these requirements, any test device to facilitate forming force and clamping force is applied to obtain different limit strain state. 4.4 forming limit curve should be plotted on the forming limit diagram. Figure 1 is an example of a forming limit curve.

5 test procedure

5.1 recommend the following steps were determined forming limit. GB/T 24171.1-2009/ISO 12004-1.2008 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24171.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24171.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24171.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24171.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.