GB/T 24171.2-2009 English PDF

US$534.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24171.2-2009: Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24171.2-2009	534	Add to Cart	4 days	Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory	Valid

Similar standards

GB/T 24174   GB/T 24523   GB/T 24173   GB/T 24179   GB/T 24171.1   

Basic data

Standard ID: GB/T 24171.2-2009 (GB/T24171.2-2009)
Description (Translated English): Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H22
Classification of International Standard: 77.040.10
Word Count Estimation: 27,286
Date of Issue: 2009-06-25
Date of Implementation: 2010-04-01
Adopted Standard: ISO 12004-2-2008, IDT
Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the linear strain at room temperature and path determination of forming limit curve (FLC) test conditions and methods. This section applies to the test material is flat, thickness between 0. 3 mm ~ 4 mm metallic materials.

GB/T 24171.2-2009: Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Metallic materials Sheet and strip Determinations of forming limit curves Part 2. Determinations of forming limit curves in laboratory ICS 77.040.10 H22 National Standards of People's Republic of China GB/T 24171.2-2009/ISO 12004-2.2008 Metallic materials - Sheet and strip - Determination of forming limit curve Determination of forming limit curves Laboratory. Part 2 (ISO 12004-2.2008, IDT) Posted 2009-06-25 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 Symbol Description 1 and 2 3 Principle 1 Sample and test equipment 2 4 5 strain of the section line analysis and strain measurement (ε1, ε2) 8 6 Document 12 7 12 test reports Appendix A (normative) and second derivative "Filtered" second derivative 13 Appendix B (normative) to fit the width of the calculation region 14 Annex C (normative) "bell curve" best fit parabola anti Calculation 15 Applications and measurement Annex D (normative) meshes with a magnifying glass or microscope to measure 16 Test data Appendix E (normative) used to verify the calculation program Table 17 Mathematical description of Appendix F (Normative Appendix) FLC and representation 18 Annex G (informative) extreme example of cross-sectional data 19 Flowchart in Appendix H (normative) from the measured value of the strain distribution to the FLC 20 References 22 GB/T 24171.2-2009/ISO 12004-2.2008

Foreword

GB/T 24171 "Determination limit curves of metallic materials - Sheet and strip forming" is divided into two parts. --- Part 1. press shop Forming Limit Diagram Measurement and Application; --- Part 2. Laboratory determination of forming limit curves. This section GB/T 24171 Part 2. This section is equivalent international standards ISO 12004-2.2008 "metal thin material Plate and strip - Determination of forming limit curves - Part 2. Laboratory determination of forming limit curves "(in English). For ease of use, this section made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) with a decimal point '. 'Instead of a comma as the decimal point,' '; c) Remove the preface to the international standards; d) Remove the international standard tables in French, German and Note 21 of the Notes; e) Remove the International Standard Table 2; g) of the sample reported partial increase of the "standard number" one. h) deleted Appendix E, "the following data sets and allow the dispersion can be found in the relevant documents on the Internet (see reference table of Contents). "Sentence. This section of the Appendix A, Appendix B, Appendix C, Appendix D, Appendix F, Appendix H are normative appendix, Appendix E, Appendix G of data Appendix. This part is proposed by the China Iron and Steel Association. This part of the National Steel Standardization Technical Committee. This section is drafted. Wuhan Iron and Steel (Group) Corporation, Taiyuan Iron and Steel (Group) Company. The main drafters of this section. Zhu Hongchuan, IRON, Chen Shihua, Wang Liying, Qiubao Wen, Du shadow. GB/T 24171.2-2009/ISO 12004-2.2008

Introduction

Forming Limit Diagram (FormingLimitDiagram/FLD) --- contains the main strain/strain point of the second chart. FLD can distinguish a strain value is safe or broken for some materials, from the security point to the breaking point the boundaries set Defined as the forming limit curve. There are two different methods can be determined forming limit of materials. 1) Hedge waste parts strain analysis, measurement and shape of the part and process related FLCs. In the press shop, strain path of these points is usually unknown, dependent on the forming limit curve FLC materials, parts and selected in The molding conditions. This method, see Part 1 of this standard. 2) FLCs under perfect laboratory conditions measured. In order to evaluate its formability, only need to draw the forming limit curve FLC for a given material. The standard measure of the FLC Constant need to use different linear strain paths. This method can be applied to materials characterization, see Part 2 of this standard. For this part (on laboratory determination of forming limit curves) GB/T 24171, the following conditions are also valid. Deformable material forming limit curves (FLCs) for determining been specified in the drawing, bulging or drawing bulging amorphous phase can be achieved when combined degree. This capability is crack, local necking limit. There are a number measuring the material forming limit of the method, it should be noted , The results obtained using different methods can not be used for comparison purposes. FLC characterized through certain hot - deformation limit certain thickness of the material after mechanical treatment. Mechanical properties and material as measured in FLC History and other additional information to determine the amount of pre-forming properties are important. In order to compare the ability of different materials molding, not only to judge the FLC, and the following parameters are important. a) at least the mechanical properties of the main direction; b) The most vigorous plastic elongation, referring to GB/T 228; d) given deformation section shape values, referring to GB/T 5028. GB/T 24171.2-2009/ISO 12004-2.2008 Metallic materials - Sheet and strip - Determination of forming limit curve Determination of forming limit curves Laboratory. Part 2

1 Scope

This section GB/T 24171 specifies the linear strain at room temperature and measuring path forming limit curve (FLC) and test conditions method. This section applies to the test material is flat, thickness between 0.3mm ~ 4mm metal material. Note. The upper limit of 4mm thickness is determined by the material thickness and the maximum allowable ratio of the diameter of the punch. For steel sheet, the recommended maximum thickness of 2.5mm.

2 Symbol and description

This section uses the symbols in Table 1 and described below. Table 1 Symbol and description Symbol Description Unit ε1 main true strain - ε2 times true strain - ε3 thick strain - σ standard deviation - D punch diameter mm Dbh mm die diameter X (0), X (1) X (m1) X (shape) X-direction position mm S (0), S (1) S (5) cross-section - Shaped X-direction position Points - M1 failure Number of Positions section - W1 fitting area width mm Principle 3 FLC material used to represent approximate intrinsic limit at a set linear path strain deformation conditions. In order to accurately determine the FLC, in Measurement area needs to maintain nearly friction-free state. GB/T 24171.2-2009/ISO 12004-2.2008 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24171.2-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24171.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24171.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24171.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.