GB/T 10335.4-2017 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10335.4-2017: Coated paper and board -- Coated folding board Status: Valid GB/T 10335.4: Historical versions
Basic dataStandard ID: GB/T 10335.4-2017 (GB/T10335.4-2017)Description (Translated English): Coated paper and board -- Coated folding board Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y32 Classification of International Standard: 85.060 Word Count Estimation: 7,762 Date of Issue: 2017-11-01 Date of Implementation: 2018-05-01 Older Standard (superseded by this standard): GB/T 10335.4-2004 Regulation (derived from): National Standard Announcement 2017 No. 29 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 10335.4-2017: Coated paper and board -- Coated folding board---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Coated paper and board-Coated folding board ICS 85.060 Y32 National Standards of People's Republic of China Replacing GB/T 10335.4-2004 Coated paper and board Coated white board Posted.2017-11-01 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 10335 is divided into the following five sections. --- GB/T 10335.1 coated paper and cardboard coated art printing paper (coated paper); --- GB/T 10335.2 coated paper and cardboard lightweight coated paper; --- GB/T 10335.3 coated paper and cardboard coated white cardboard; --- GB/T 10335.4 coated paper and cardboard coated white cardboard; --- GB/T 10335.5 coated paper and cardboard coated cardboard boxes. This section is the third part of 10335. This section drafted in accordance with GB/T 1.1-2009 given rules. This section replaces GB/T 10335.4-2004 "coated paper and cardboard coated white cardboard", compared with GB/T 10335.4-2004 To change as follows. --- Increased gloss, burst index, folding endurance, the combination of strength indicators; --- Adjust the quantitative, tightness, printing surface roughness, printing surface strength, D65 brightness, water absorption and other indicators; --- Remove the smoothness index; --- Modify the printing surface strength, printing ink gloss, ink ink absorption test with the standard ink, and the corresponding standard value Adjustment. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This part is proposed by China National Light Industry Council. This part of the National Paper Industry Standardization Technical Committee (SAC/TC141) centralized. This part of the drafting unit. China Pulp and Paper Research Institute, Shandong Chenming Paper Group Co., Ltd., Zhejiang Wing Tai Paper Group shares Co., Ltd., Tongda Paper Co., Ltd. in Hangzhou, the National Paper Quality Supervision and Inspection Center, China Paper Association Standardization Professional Committee. The main drafters of this section. Shiji, Woqi, Wang Jianhua, Zhang Qing, Zhang Yue, Li Bingjuan, Yu Nai-feng. This part replaces the standards previously issued as. --- GB/T 10335.4-2004. Coated paper and board Coated white board1 ScopeGB/T 10335 provisions of this section coated whiteboard classification, requirements, test methods, inspection rules and signs, packaging, transportation, Storage. This section applies to the surface layer of base paper bleached pulp, after coating, calendering finish made of coated white cardboard.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 450 paper and cardboard samples taken and the sample vertical and horizontal, front and back determination GB/T 451.1 Determination of paper and board dimensions and skewness GB/T 451.2 Determination of paper and board GB/T 451.3 Determination of paper and board thickness Determination of folding endurance of paper and board GB/T 457-2008 GB/T 462 paper, cardboard and pulp analysis of moisture samples GB/T 1539 Determination of the burst resistance of cardboard GB/T 1540 Determination of water absorption of paper and board Boehner method GB/T 1541 Determination of dust on paper and board GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 7974 paper, cardboard and pulp Blu-ray diffuse reflection factor D65 brightness determination (diffuse/vertical method, outdoor daylight conditions) GB/T 8941 paper and board - Determination of specular gloss GB/T 10342 paper packaging and marking GB/T 10739 Standard atmospheric conditions for the handling and testing of paper, board and pulp specimens GB/T 12032 Preparation of paper and board printing gloss print GB/T 12911 paper and board - Determination of ink absorbency GB/T 22363-2008 Determination of paper and board roughness (air leakage method) Bentley method and the printed surface method Determination of bending stiffness of paper and board GB/T 22364-2008 GB/T 22365 paper and board printing surface intensity measurement GB/T 26203 Determination of bonding strength in paper and cardboard (Scott type)3 categories3.1 coated white cardboard divided into two categories of gray and white background. 3.2 coated white cardboard according to the quality level can be divided into excellent products, first-class products and qualified products. 3.3 coated white cardboard divided into flat paper and web.4 requirements4.1 coated whiteboard technical indicators should be consistent with Table 1 or the contract. ...... |
