GB/T 37140-2018 English PDF

US$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37140-2018: Technical requirements acceptance specification for inspection and testing laboratory
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37140-2018	759	Add to Cart	6 days	Technical requirements acceptance specification for inspection and testing laboratory	Valid

Similar standards

GB 50516   GB/T 50312   GB 50339   GB/T 45581   GB/T 45158   

Basic data

Standard ID: GB/T 37140-2018 (GB/T37140-2018)
Description (Translated English): Technical requirements acceptance specification for inspection and testing laboratory
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P33
Classification of International Standard: 91.040.10
Word Count Estimation: 38,399
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37140-2018: Technical requirements acceptance specification for inspection and testing laboratory

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements acceptance specification for inspection and testing laboratory ICS 91.040.10 P33 National Standards of People's Republic of China Inspection and testing laboratory technical requirements acceptance specification Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 General 4 5 Location and layout 4 5.1 General requirements 4 5.2 Evaluation and Control Main Item 4 6 Architecture, structure and decoration 5 6.1 General requirements 5 6.2 Evaluation and Control Main Item 6 6.3 Element indicators and standard specifications to be followed 9 7 Water supply and drainage system 9 7.1 General requirements 9 7.2 Evaluation and Control Main Item 10 7.3 Element indicators and standard specifications to be followed 11 8 Heating, ventilation and air conditioning 12 8.1 General requirements 12 8.2 Assessment and Control Main Item 12 8.3 Element indicators and standard specifications to be followed 15 9 Building electrical 16 9.1 General provisions 16 9.2 Evaluation and Control Main Item 16 9.3 Element indicators and standard specifications to be followed 18 10 gas pipeline 19 10.1 General requirements 19 10.2 Evaluation and Control Main Item 19 10.3 Element indicators and standard specifications to be followed 20 11 Laboratory furniture 21 11.1 General requirements 21 11.2 Evaluation and Control Main Item 21 11.3 Element indicators and standard specifications to be followed 22 12 Intelligence and Control 22 12.1 General requirements 22 12.2 Evaluation and Control Main Item 22 12.3 Element indicators and standard specifications to be followed 24 13 Safety and protection 25 13.1 General requirements 25 13.2 Assessment and Control Main Item 25 13.3 Element indicators and standard specifications to be followed 26 14 Energy Conservation and Environmental Protection 27 14.1 General requirements 27 14.2 Evaluation and Control Main Item 27 14.3 Element Indicators and Standard Specifications to Follow 28 15 Design review and use acceptance 28 15.1 General requirements 28 15.2 Evaluation and Control Main Item 28 15.3 Element Indicators and Standard Specifications for Compliance 30 Appendix A (informative) Common Laboratory Building Graphic Design Assessment Guide 31 Appendix B (informative) Laboratory power load calculation 33

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Laboratory Equipment and Equipment Standardization Technical Committee (SAC/TC526). This standard was drafted. Huinuode (Beijing) Technology Co., Ltd., Tsinghua University Architectural Design and Research Institute Co., Ltd., machinery industry equipment Instrument Integrated Technology and Economic Research Institute, Shenzhen Entry-Exit Inspection and Quarantine Bureau Food Inspection and Quarantine Technology Center, Nanjing Product Quality Supervision and Inspection Institute, Yunnan Entry-Exit Inspection and Quarantine Bureau Technology Center, Shenzhen Huazheng Laboratory Technology Service Co., Ltd., Standards Technical Service Co., Ltd. Division, Suzhou UL Meihua Certification Co., Ltd., Xude Automation System (Shanghai) Co., Ltd., Guangdong Entry-Exit Inspection and Quarantine Bureau inspection and quarantine technology Center, Deyang Zhongzheng Technology Co., Ltd., Shaoxing Quality and Technology Supervision and Inspection Institute, China Metrology University. The main drafters of this standard. Huang Jianyu, Zhang Guiling, Sheng Wenge, Li Xiuying, Wang Chengcheng, Liu Jianhua, Yan Wei, He Xiaoyan, Qi Xiegui, Yang Lingchun, Hou Lexi, Tong Dawei, Chen Yu, Xu Hua, He Neng, Yan Xin, Li Siyuan, Liu Yuling, Liu Dong, Cui Yanhui, Zhou Zuo, Wang Lei, Yan Huaijiang, Huang Xinghai, Yan Feng, Wei Jun, Zhang Hong, Lu Xinxin, Huang Yu. Inspection and testing laboratory technical requirements acceptance specification

1 Scope

This standard specifies the acceptance specifications for the technical requirements of inspection and testing laboratories, including the general rules for design and construction acceptance, site selection and plane cloth. Bureau, building structure and decoration, water supply and drainage system, heating and ventilation and air conditioning, building electrical, gas pipeline, laboratory furniture, intelligent and Control, safety and protection, energy conservation and environmental protection, design review and use acceptance. This standard applies to the design and construction of inspection, testing laboratories for new construction, alteration and expansion, as well as the review of design documents by the construction party. Use acceptance. This standard does not apply to biosafety, animal and plant testing, purification and medical laboratories.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 2894 safety signs and guidelines for their use GB 3095 Ambient Air Quality Standard GB 3836.14 Explosive atmosphere - Part 14. Site classification GB 4962 Hydrogen Safety Technical Regulations GB 5749 Sanitary Standard for Drinking Water GB 6566 building materials radionuclide limited GB/T 6682 Analytical laboratory water specifications and test methods GB/T 7144 gas cylinder color mark Basic identification color, identification symbol and safety identification of GB 7231 industrial pipeline GB 8978 Integrated Wastewater Discharge Standard GB/T 9361-2011 Computer Site Safety Requirements GB/T 10071 Urban area environmental vibration measurement method GB/T 11651 personal protective equipment selection specification GB 12348 industrial enterprise boundary environmental noise emission standards GB 13495.1-2015 Fire safety signs Part 1. Signs GB 13690 Chemical Classification and Hazard Communication General Rules GB 15258 Chemical Safety Labeling Regulations GB 15603 General rules for the storage of common chemical dangerous goods GB 15630 fire safety sign setting requirements GB 16297 Integrated emission standards for atmospheric pollutants GB/T 18039.4-2017 Compatibility level of low frequency conducted disturbance in electromagnetic compatibility environment factory GB/T 18204.5 Public places hygiene inspection methods GB 18580 Indoor decoration materials, artificial release boards and their products, formaldehyde emission limit ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37140-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37140-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37140-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37140-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.