GB/T 17563-2008 English PDFUS$3534.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17563-2008: Programmable measuring instruments -- Interface system (byte serial, bit parallel) -- Codes, formats, protocol and common commands Status: Valid GB/T 17563: Historical versions
Basic dataStandard ID: GB/T 17563-2008 (GB/T17563-2008)Description (Translated English): Programmable measuring instruments -- Interface system (byte serial, bit parallel) -- Codes, formats, protocol and common commands Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N20 Classification of International Standard: 17.220 Word Count Estimation: 177,133 Date of Issue: 2008-06-30 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 17563-1998 Quoted Standard: GB/T 15946-2008; ISO/IEC 646-1991; ISO 2955-1983; ISO 6093-1985; IEC 599-1989 Adopted Standard: IEC 60625-2-1993, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides a set of codes for the device and format so that these devices can be GB/T 15946 bus connected together. This standard also provides for achieving independence in use, the exchange of information relating to equipment necessary for communication protocols, and further provides the instrumentation system applications used common commands and features. This standard is to be directly used for small-scale instrumentation systems, but also for mainly by the measurement, incentive and control and instrumentation system composed of interconnected devices. It can also be used outside the scope of some of the instrumentation system equipment. In addition to the standard definition of a variety of device-related information, but also on the GB/T 15964��contains some of the interface functions for the expansion and further explanation, while maintaining compatibility with the standard. This standard covers the following topics: subset, including error handling standard message handling protocols, clear procedures and response packets grammatical structure, widely used in instrumentation systems of public order, standard status reporting structure, system configuration and synchronization protocols. GB/T 17563-2008: Programmable measuring instruments -- Interface system (byte serial, bit parallel) -- Codes, formats, protocol and common commands---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Programmadle measuring instruments. Interface system (byte serial, bit parallel). Codes, formats, pprotocols and common commands ICS 17.220 N20 National Standards of People's Republic of China GB/T 17563-2008/IEC 60625-2.1993 Replacing GB/T 17563-1998 Programmable measuring instruments - Interface system (byte serial, bit Parallel) code formats, protocols and common commands (IEC 60625-2.1993, Programmablemeasuringinstruments- Interfacesystem (byteserial, bitparalel) - Part 2. Codes, formats, protocolsandcommoncommands, IDT) Posted 2009-01-01 2008-06-30 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅴ 1 General 1 1.1 Scope 1 1.2 Objective 1 1.3 Note 1 2 Normative references 1 3 2 System Considerations 3.1 Terms and definitions 2 3.2 System message transmission 2 3.3 functional layer 3 4 device meets criteria 4 4.1 GB/T 15946 requirements 4 4.2 packet switched requirements 5 5 4.3 syntax requirements 4.4 Status Reporting Requirements 6 4.5 Public Command 8 4.6 synchronization requirements 10 4.7 System Configuration capacity 10 Capacity 11 4.8 Controller 4.9 Device Documentation requirements 11 5 device interface functional requirements 12 5.1 handshake claim 12 5.2 addresses require 12 5.3 speakers in claim 12 5.4 Requirements listener 12 5.5 Service request asks 13 5.6 remote/local requirements 13 5.7 parallel poll claim 14 Clear requirements for equipment 14 5.8 5.9 device triggers to claim 15 5.10 Controller Functional requirements 15 5.11 Electrical requirements 15 Power requirements 15 5.12 6 packet exchange control protocol 16 6.1 functional elements 16 6.2 Protocol Overview 25 6.3 Information exchange control operation 28 6.4 Protocol Rule 31 GB/T 17563-2008/IEC 60625-2.1993 6.5 Exceptions 34 Agreement Listen 35 7 Device Format 7.1 Overview 35 7.2 36 comments End 7.3 Program information --- 38 Functional Grammar 7.4 Separator function unit 41 7.5 < program message terminator> 42 7.6 < program> functional elements 42 7.7 < program data> functional elements 46 8 devices talk format 55 8.1 Overview 55 8.2 55 comments 8.3 End of response packets --- Functional Grammar 55 8.4 Separator functional elements 58 8.5 < response message terminator> 59 8.6 < Response header> 59 8.7 < Response Data> functional elements 60 9 65 encoded data packets 9.1 ISO 7-bit code 65 9.2 8-bit binary integer code 66 9.3 binary floating-point encoding 66 10 common commands and queries 69 10.1 ADD, address command accepts 72 10.2 CAL? Calibration query 72 10.3 CLS, clear status command 72 10.4 DDT, define device trigger command 73 10.5 DDT? Defined device triggers a query 73 10.6 DLF, prohibit listening function commands 74 10.7 DMC, define a macro command 74 10.8 EMC, enable macros 76 10.9 EMC? Enable macro query 76 10.10 ESE, standard event status enable command 77 10.11 ESE? Standard Event Status Enable Query 77 10.12 ESR? Standard event status register 78 queries 10.13 GMC? , Take macros Content Query 78 10.14 IDN? Identification query 79 10.15 IST? Individual status query 79 10.16 LMC? Learning macro command to query 80 10.17 LRN? Learning device set query 80 10.18 OPC, the operation is complete command 81 10.19 OPC? , The operation is complete query 81 10.20 OPT? Option to identify queries 81 10.21 PCB, transmission control returns 82 GB/T 17563-2008/IEC 60625-2.1993 10.22 PMC, clear macro commands 83 10.23 PRE, parallel poll enable register Enable command 83 10.24 PRE? , Parallel poll enable register enables the query 83 10.25 PSC, power status clear command 84 10.26 PSC? , Remove the power status query 84 10.27 PUD, protect user data command 85 10.28 PUD? To protect user data query 85 10.29 RCL, restore command 85 10.30 RDT, the source described transfer command 86 10.31 RDT? The source described the transfer inquiry 86 10.32 RST, reset command 87 10.33 SAV, storage commands 87 10.34 SRE, service request enable command 88 10.35 SRE? , Service Request Enable Query 88 10.36 STB? Read status byte query 89 10.37 TRG, trigger command 89 10.38 TST? Self-test query 89 10.39 WAI, wait --- continue to command 90 11 Device Status Report 90 11.1 Overview 90 11.2 Status byte register 93 11.3 Service Request Enable 95 11.4 state data structure 99 11.5 Standard status data structure 103 11.6 parallel poll response processing 107 12 Equipment/synchronization controller 109 12.1 Overview 109 12.2 overlapping sequence commands and commands 109 12.3 running operation flag 109 12.4 No sign of ongoing operations 110 12.5 Controller/Device Synchronization commands 110 12.6 external control signal synchronization 113 12.7 OPC and OPC? Improper usage 113 12.8 Design Considerations 115 13 automatic system configuration 116 13.1 Introduction 116 13.2 Overview 116 13.3 General procedure automatically configured 120 13.4 Automatic configuration command details 123 13.5 supplement Automatic Configuration Technology 128 13.6 Example 128 The controller is compatible with criterion 14 128 14.1 GB/T 15946 requirements 128 GB/T 17563-2008/IEC 60625-2.1993 14.2 packet switched requirements 129 129 14.3 Agreement 14.4 processing function unit 130 14.5 130 controller specifications 15 Standard controllers require 130 Interface function requirements of the controller 130 15.1 Additional requirements 15.2 standard controller 131 15.3 131 recommended standard controller 16 132 controller information exchange agreement 16.1 132 definitions 16.2 Sequence Control 133 17 140 common controller protocol 140 17.1 Reset agreement 17.2 Discovery Request Service Agreement 141 17.3 142 serial poll all device protocols 17.4 transmission control protocol 143 17.5 Request Control 144 17.6 listener discovery protocol 145 146 17.7 Setting Protocol address 17.8 151 protocol test system Appendix A (informative) composite head uses and examples 153 Annex B (informative) Equipment/synchronization controller 156 Annex C (informative) Example 166 system is automatically configured GB/T 17563-2008/IEC 60625-2.1993ForewordThis standard is identical with IEC 60625-2.1993 (English version). The main differences with the international standards as follows. --- In order to facilitate the domestic users, we made some editorial changes; --- According to GB/T 1.1-2000 requirements of the standard format for the layout, modify. This standard is GB/T 17563-1998 of amendments. This standard replaces GB/T 17563-1998. And GB/T 17563-1998 Comparison, the standard name has changed. This standard is the technical content to make minor adjustments for ease of use, made under this section Column Review. a) According to China's actual use, in accordance with the provisions of GB/T 1.1-2000, the original text was revised editorial, root According to the English text of the reg number for the re-publishing; b) an increase of some of the terms and acronyms; c) increasing the appendix content; d) a description of the individual in editorial errors were corrected. This standard Annex A, Annex B, Annex C is informative appendix. The standard proposed by China Machinery Industry Federation. The standard measurement and control technology Standardization Technical Committee at its forty-administered by the National industrial processes. This standard was drafted. Machinery Industrial Instrumentation Technology and Economy Institute. Drafters of this standard. Ouyang Jinsong, Cheng Yuk, Wang Yumin. This standard previous editions. GB/T 17563-1998. GB/T 17563-2008/IEC 60625-2.1993 Programmable measuring instruments - Interface system (byte serial, bit Parallel) code formats, protocols and common commands1 General1.1 Scope This standard specifies a set of codes for the device and format, so that these devices can be GB/T 15946 are connected together by a bus. The standard Registration also provides for the realization of the use of independent, device-dependent exchange of information necessary for the communication protocol, and further provides that the instrument system Common applications of common commands and features. This standard is to be directly used for small-scale instrumentation systems, but also for mainly by the measure, as well as incentives and instrument controller interconnect Consisting of system equipment. It is also used in some devices beyond the meter system-wide. In addition to this standard defines various device-related information, but also on a number of interface functions GB/T 15964 contained extended And further explained, while maintaining compatibility with the standard. This standard covers the following topics. ---Subset; --- Including the standard error handling processing protocol packets; --- Clear procedures and response packets grammatical structure; --- Instrument system widely used in public order; --- Standard status reporting structure; --- System configuration and synchronization protocol. Application of this standard does not relieve the responsibility of the user at the application level to system compatibility undertaken. Users must be familiar with all system Member properties, in order to make the best system. Readers of this standard including managers and designers. 1.2 Purpose The purpose of this standard. 1) provide a clear definition of the code structure, formats, protocols, and public order; 2) maintaining the versatility to suit a variety of needs within the scope of this standard application; 3) improve the degree of equipment from different manufacturers can be interconnected without modification and applications; 4) the instrument and related equipment can be limited and extended ability to interconnect to produce, process, and interpret various messages Types of; 5) custom code formats, protocols and common commands, to reduce the cost to generate application software and system integration; 6) communicate directly, no additional special code translation and conversion between formats and instrumentation systems allow devices. Notes 1.3 This standard defines a number of common English words, they have special significance within the scope of this standard. These words in GB/T 15946-2008 has different meanings, however, for readability and conciseness of the text, the words used in this standard is desirable. this The standard also defines the messages used to describe the transfer syntax elements on the bus, the syntax element enclosed in angle brackets, for example. < syntax elements> In order to distinguish them from local packets, remote packets and text area.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent GB/T 17563-2008/IEC 60625-2.1993 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17563-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17563-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17563-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17563-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17563-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17563-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
