|
US$429.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11140-2023: Technical specification of permanent magnet synchronous speed controller for mine explosion-proof electric rubber tyred vehicle
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11140-2023 | English | 429 |
Add to Cart
|
4 days [Need to translate]
|
Technical specification of permanent magnet synchronous speed controller for mine explosion-proof electric rubber tyred vehicle
| Valid |
NB/T 11140-2023
|
PDF similar to NB/T 11140-2023
Basic data | Standard ID | NB/T 11140-2023 (NB/T11140-2023) | | Description (Translated English) | Technical specification of permanent magnet synchronous speed controller for mine explosion-proof electric rubber tyred vehicle | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D98 | | Classification of International Standard | 73.100.99 | | Word Count Estimation | 19,183 | | Date of Issue | 2023-02-06 | | Date of Implementation | 2023-08-06 | | Issuing agency(ies) | National Energy Administration | NB/T 11140-2023: Technical specification of permanent magnet synchronous speed controller for mine explosion-proof electric rubber tyred vehicle
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73:100:99
CCSD98
People's Republic of China Energy Industry Standards
Permanent magnet synchronization for mine explosion-proof electric rubber-tyred vehicles
Speed controller technical conditions
Released on 2023-02-06
2023-08-06 Implementation
Released by the National Energy Administration
table of contents
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Type, Model 2
5 Technical requirements 2
6 Test method 8
7 Inspection rules 13
8 Labeling, packaging, transportation and storage 15
foreword
This document follows the rules of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document was proposed by the China Coal Industry Association:
This document is under the jurisdiction of the Coal Mine Safety Standardization Technical Committee of the Coal Industry:
This document is drafted by: China Coal Science and Industry Group Chongqing Research Institute Co:, Ltd:, China Coal Science and Industry Group Shenyang Research Institute Co:, Ltd:, Chongqing An
Standard Testing Research Institute Co:, Ltd:, Aerospace Heavy Engineering Equipment Co:, Ltd:, Wuhan Hekang Power Technology Co:, Ltd:, Anbiao National Mining Products
Safety Sign Center, Changzhou Research and Trial Production Center Co:, Ltd:, Shandong University:
The main drafters of this document: Li Yan, Zou Yinhui, Kong Lingang, Zhang Hongkui, Liu Hui, Zhang Jianming, Chen Qing, Wang Chunhua, Yang Wenzhong, Li Zhe, Zhang Yong,
Ying Yang, Meng Jijian, Sun Jian, Wei Hongyu, Peng Hongling, Zhang Shaojie, Yang Fan, Wen Long, Dan Kai, Xu Zhiquan, Han Xueping, Su Gongfu, Wang Shuai, Kang Liying,
Huang Xuanzhe, Zhang Haipeng, Xue Shibin, Li Mingzhe, Zhang Yue:
Permanent magnet synchronization for mine explosion-proof electric rubber-tyred vehicles
Speed controller technical conditions
1 Scope
This document specifies the types and types of permanent magnet synchronous speed controllers (hereinafter referred to as "speed controllers")
No:, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage:
This document applies to permanent magnet synchronous speed controllers for mine explosion-proof electric rubber-tyred vehicles:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 191 Packaging, storage and transportation icon marks
GB/T 2423:4-2008 Environmental testing for electric and electronic products - Part 2: Test method Test Db: Alternating damp heat (12h 12h
cycle)
GB/T 2423:5-2019 Environmental Testing Part 2: Test Methods Test Ea and Guidelines: Shock
GB/T 2423:10-2019 Environmental testing Part 2: Test method Test Fc: Vibration (sinusoidal)
GB/T 3836:1-2021 Explosive atmospheres Part 1: General requirements for equipment
GB/T 3836:2-2021 Explosive atmospheres Part 2: Equipment protected by flameproof enclosure "d"
GB/T 3836:3-2021 Explosive atmospheres Part 3: Equipment protected by increased safety type "e"
GB/T 4208 enclosure protection level (IP code)
GB/T 12668:3-2012 Adjustable speed electrical drive system Part 3: Electromagnetic compatibility requirements and specific test methods
GB/T 13306 Signage
GB/T 13384 General Technical Specifications for Packaging of Mechanical and Electrical Products
GB/T 14048:1-2012 Low-voltage switchgear and controlgear Part 1: General
GB/T 17619-1998 Electromagnetic Radiation Immunity Limits and Measurement Methods for Electronic and Electrical Components of Motor Vehicles
MT/T 661-2011 General Technical Specifications for Coal Mine Underground Electrical Equipment
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
Speed controller speedcontroller
It is composed of a control signal interface circuit, a drive motor control circuit and a drive circuit, and controls the energy transmission between the power supply and the drive motor
device of:
3:2
The highest voltage that the speed controller can withstand when working for a long time:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11140-2023_English be delivered?Answer: Upon your order, we will start to translate NB/T 11140-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11140-2023_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11140-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|