HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 196-2006 English PDF

US$709.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 196-2006: Verification regulation of working glass container
Status: Valid

JJG 196: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJG 196-2006	English	709	Add to Cart	5 days [Need to translate]	Verification regulation of working glass container	Valid	JJG 196-2006
JJG 196-1990	English	RFQ	ASK	9 days [Need to translate]	Verification Regulation of General Volumetric Glass	Obsolete	JJG 196-1990
JJG 196-1979	English	RFQ	ASK	3 days [Need to translate]	(Chinese Industry Standard)	Obsolete	JJG 196-1979

PDF similar to JJG 196-2006

Standard similar to JJG 196-2006

JJG 162 GB/T 36126 GB/T 1885 JJG 195 JJG(TZ)198 JJG(TZ)196

Basic data

Standard ID	JJG 196-2006 (JJG196-2006)
Description (Translated English)	Verification regulation of working glass container
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	A53
Classification of International Standard	17.120
Word Count Estimation	27,212
Date of Issue	2006-12-08
Date of Implementation	2007-06-08
Older Standard (superseded by this standard)	JJG 196-1990
Quoted Standard	JJG 20-2001; GB/T 15726-1995; GB/T 6682-1992
Regulation (derived from)	AQSIQ Announcement No. 187 of 2006
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine
Summary	This standard applies to the manufacture and use of the new burette indexing pipette, single marking pipette, single mark volumetric flasks, measuring cylinders, measuring cups and other common glass container (hereinafter referred to as glass container) for initial verification, Subsequent testing and use of the test.

JJG 196-2006: Verification regulation of working glass container

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification regulation of working glass container National Metrology Verification Regulations of the People's Republic Common glass measuring device Released on.2006-12-08 2007-06-08 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Common glass gauge verification procedures Working GlassContainer Replace JJG 196-1990 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on December 8,.2006, and It will take effect on June 8,.2007. Focal Point. National Traffic Capacity Measurement Technical Committee Drafting unit. Henan Institute of Metrology Shanghai Institute of Metrology and Testing Technology Beijing Institute of Metrology and Measurement Science Participating unit. China Institute of Metrology Liyang Longxing Petroleum Instrument Factory This regulation entrusts the National Traffic Capacity Measurement Technical Committee to explain The main drafters of this procedure. Du Shuli (Henan Institute of Metrology) Zhang Zhiqing (Henan Institute of Metrology) Xie Junyan (Shanghai Institute of Metrology and Testing Technology) Ma Yongyong (Beijing Institute of Metrology and Measurement Science) Participate in the drafters. Zhang Wei (China Institute of Metrology) Zhang Wei (Shanghai Institute of Metrology and Testing Technology) Wang Qingbin (Fuyang Longxing Petroleum Instrument Factory)

1 Scope (1) 2 Citations (1) 3 terms and units of measurement (1) 4 Overview (2) 4.1 Classification, type, accuracy grade and nominal capacity of glass gauges (2) 4.2 Structure of the glass measuring device (2) 5 General technical requirements (5) 5.1 Material (5) 5.2 Appearance (5) 5.3 Structure (6) 5.4 Adhesion (6) 6 Metrological performance requirements (6) 6.1 Outflow time and waiting time (6) 6.2 Capacity tolerance (7) 7 Measuring instrument control (9) 7.1 Verification conditions (9) 7.2 Verification project (9) 7.3 Verification method (9) 7.4 Processing of verification results (13) 7.5 Verification cycle (13) Appendix A Common glass gauge capacity verification operation steps (14) Appendix B Common Glass Gauge Measurement Method K(t) Value Table (17) Appendix C Common Glass Gauge Calibration Record (19) Appendix D Certification Certificate Page Format (21) Appendix E Format of the verification result page (22) Common glass gauge verification procedures

1 Scope

This procedure is applicable to burettes, indexing pipettes, single-line pipettes, single-line line capacity for new manufacturing and use. The first verification, subsequent verification and use of commonly used glass measuring devices such as bottles, measuring cylinders and measuring cups (hereinafter referred to as glass measuring devices) Inspection.

2 Citations

JJG 20-2001 standard glass measuring device GB/T 15726-1995 Glass instrument internal stress test method GB 6682-1992 Analytical laboratory water specifications and test methods Use of this procedure should take care to use the current valid version of the above cited documents.

3 terms and units of measure

3.1 Outflow Gradient Pipette outflowgraduatedpipette For the indexing pipette, when the liquid naturally flows to the end of the liquid port, the residual liquid should be retained at the mouth end. 3.2 blown-out indexing pipe suctiongraduatedpipette For the indexing pipette, when the liquid naturally flows to the end of the pipe, the liquid residue is discharged. 3.3 burette with stopcock Use a straight-through piston to connect the measuring tube to the burette of the flow port. 3.4 No-plug buretteburettewithoutstopcock Use a hose with a glass ball in the inner hole to connect the measuring tube and the burette of the fluid port. 3.5 three-way piston automatic zero calibration burette automaticburettewiththree-waystopcocks A three-way piston is used to connect the measuring tube and the flow port, and the burette with an automatic positioning device. 3.6 side piston automatic zero setting burette automaticburettewithsidestopcock Straight-through piston on the side, with a burette for the automatic zero setting device. 3.7 side three-way piston automatic zero calibration burette automaticburettewithsidethree-waystopcocks The three-way piston is on the side and has a burette with an automatic zero setting device. 3.8 seat burette burettewithseat A burette with an auxiliary injection tube and a base support. 3.9 clip burette with holder With an auxiliary injection tube, the burette mounted on the holder.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 196-2006_English be delivered?

Answer: Upon your order, we will start to translate JJG 196-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 196-2006_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 196-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 196-2006?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 196-2006 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.