US$459.00 · In stock Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. JJF 1740-2019: Calibration Specification for Cable and Antenna Analyzers Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
JJF 1740-2019 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Calibration Specification for Cable and Antenna Analyzers
| Valid |
JJF 1740-2019
|
PDF similar to JJF 1740-2019
Basic data Standard ID | JJF 1740-2019 (JJF1740-2019) | Description (Translated English) | Calibration Specification for Cable and Antenna Analyzers | Sector / Industry | Metrology & Measurement Industry Standard | Classification of Chinese Standard | A56 | Classification of International Standard | 17.220 | Word Count Estimation | 20,288 | Date of Issue | 2019 | Date of Implementation | 2019-12-27 | Issuing agency(ies) | State Administration for Market Regulation |
JJF 1740-2019: Calibration Specification for Cable and Antenna Analyzers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Cable and Antenna Analyzers
National Measurement Technical Specification of the People's Republic of China
Calibration specification for antenna feeder tester
2019-09-27 release
2019-12-27 Implementation
Issued by the State Administration of Market Supervision and Administration
Calibration specification for antenna feeder tester
Focal point. National Radio Measurement Technical Committee
Main drafting unit. China Information and Communication Research Institute
Participated in the drafting unit. Beijing Xinchen Technology Co., Ltd.
China Testing Technology Research Institute
This specification is entrusted to the National Radio Measurement Technical Committee for interpretation
The main drafters of this specification.
Sun Jinglu (China Information and Communication Research Institute)
Zhang Peiyan (China Information and Communication Research Institute)
Participating drafters.
Cheng Kai (China Information and Communication Research Institute)
Huang Hui (Beijing Xinchen Technology Co., Ltd.)
Meng Linggang (China Institute of Testing Technology)
Zhifeng Zhang (China Institute of Testing Technology)
table of Contents
Introduction (Ⅱ)
1 Scope (1)
2 Terminology (1)
3 Overview (1)
4 Measurement characteristics (1)
4.1 Output signal frequency (1)
4.2 Output power (1)
4.3 Voltage standing wave ratio (1)
4.4 Attenuation (1)
4.5 Fault location distance (1)
4.6 RF power (1)
5 Calibration conditions (1)
5.1 Environmental conditions (1)
5.2 Calibration equipment (2)
6 Calibration items and calibration methods (2)
6.1 Appearance and work normality inspection (3)
6.2 Output signal frequency (3)
6.3 Output power (3)
6.4 Voltage standing wave ratio (3)
6.5 Attenuation (4)
6.6 Fault location distance (4)
6.7 RF power (4)
7 Expression of calibration results (5)
8 Recalibration interval (5)
Appendix A Original Record Format (6)
Appendix B. Internal page format of the calibration certificate (8)
Appendix C Examples of Uncertainty Evaluation of Calibration Results of Main Items (10)
Introduction
This specification is based on JJF 1071-2010 "Rules for Compiling National Measurement and Calibration Specifications" and JJF 1059.1-2012
Preparation of "Measurement Uncertainty Evaluation and Representation".
This specification specifies the frequency accuracy, output power, voltage standing wave ratio, and attenuation of the output signal of the antenna feeder tester
The calibration method of the quantity, fault location distance, RF power, and the measurement uncertainty of the calibration items are given in the appendix
Evaluation example.
This specification is the first release.
Calibration specification for antenna feeder tester
1 Scope
This specification applies to the calibration of antenna feeder testers.
2 Terminology
Distance to fault
The antenna feeder tester determines the fault location according to the reflection coefficient or the maximum value of the voltage standing wave ratio.
The distance of the location is the fault location distance.
3 Overview
The antenna feeder tester can quickly evaluate the condition of the transmission line and antenna system, and measure the reflection coefficient or voltage standing wave
Ratio, cable loss and fault location distance. Antenna feeder tester is a commonly used measuring instrument in communication, widely used in
Wireless system installation, configuration, maintenance and failure analysis.
Antenna feeder tester usually consists of signal source unit, signal separation unit, receiver unit, digital control and display unit
Composition. The port impedance is generally 50Ω.
4 Metering characteristics
4.1 Output signal frequency
Range. 2MHz ~ 18GHz, maximum allowable error. ± (1 × 10-6 ~ 7.5 × 10-5).
4.2 Output power
Range. -30dBm ~ 20dBm, the maximum allowable error. ± 2dB.
4.3 Voltage standing wave ratio
Range. VSWR > 1, maximum allowable error. ± 20%.
4.4 Attenuation
Range. 0dB ~ 30dB, maximum allowable error. ± 1.5dB.
4.5 Fault location distance
Range. 0m ~ 1500m, maximum allowable error. ± (3% × physical length 0.1m).
4.6 RF power
Range. -50dBm ~ 20dBm, maximum allowable error. ± 2dB.
Note. The above technical indicators are not used to determine eligibility, only for reference.
5 Calibration conditions
5.1 Environmental conditions
a) Ambient temperature. (23 ± 5) ℃;
b) Relative humidity. ≤80%;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJF 1740-2019_English be delivered?Answer: Upon your order, we will start to translate JJF 1740-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JJF 1740-2019_English with my colleagues?Answer: Yes. The purchased PDF of JJF 1740-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|