HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 5288-2007 English PDF

US$594.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5288-2007: Slideways grinding machines with two columns -- Test of the accuracy
Status: Valid

GB/T 5288: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 5288-2007	English	594	Add to Cart	4 days [Need to translate]	Slideways grinding machines with two columns -- Test of the accuracy	Valid	GB/T 5288-2007
GB/T 5288-1985	English	559	Add to Cart	4 days [Need to translate]	Slideways grinding machines with two columns--Testing of the accuracy	Obsolete	GB/T 5288-1985

PDF similar to GB/T 5288-2007

Standard similar to GB/T 5288-2007

GB/T 38193 JB/T 12396 JB/T 8490 GB/T 6476 GB/T 40330 GB/T 4022.1

Basic data

Standard ID	GB/T 5288-2007 (GB/T5288-2007)
Description (Translated English)	Slideways grinding machines with two columns -- Test of the accuracy
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J55
Classification of International Standard	25.080.50
Word Count Estimation	30,335
Date of Issue	2007-07-17
Date of Implementation	2007-12-01
Older Standard (superseded by this standard)	GB/T 5288-1985
Adopted Standard	ISO 4703-2001, IDT
Regulation (derived from)	China National Standard Announcement 2007 No.7 (Total No.107) - National-Standard-Commission
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the general purpose and general precision gantry rail grinding geometric accuracy, work accuracy and positioning accuracy and repeatability of positioning accuracy of the test. This standard also provides for the accuracy test corresponding tolerance. This standard applies only for linear motion table portable grinding machines. Fixed table and rotary table machine does not belong to the scope of this standard. This standard is used only for testing the accuracy of the machine, the machine does not apply to operation inspection (such as vibration, crawling moving parts, etc., abnormal noise), does not apply to check the machine parameters (such as speed, feed rate, etc.). These checks should be carried out prior to the accuracy test.

GB/T 5288-2007: Slideways grinding machines with two columns -- Test of the accuracy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Slideways geinding machines with two columns. Test of the accuracy ICS 25.080.50 J55 National Standards of People's Republic of China GB/T 5288-2007/ISO 4703.2001 Replacing GB/T 5288-1985 Gantry rail grinding machine accuracy test (ISO 4703.2001, Testconditionsforsurfacegrindingmachineswithtwocolumns- Machinesforgrindingslideways-Testingoftheaccuracy, IDT) Posted 2007-07-17 2007-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and named axis 1 4 2 General requirements 4.1 Unit 2 4.2 Referring to GB/T 17421.1-1998 and GB/T 17421.2-2000 2 4.3 Test sequence 2 Execution of test items 4.4 2 4.5 Test Tool 2 4.6 Minimum tolerance 2 4.7 Working accuracy test 3 5 special installation conditions 3 5.1 FOUNDATION 3 5.2 Isolation 3 5.3 Thermal Effect 3 5.4 Temperature Measurement 3 Geometric tests 4 6 6.1 axis motion 4 6.2 table 14 18 6.3 Spindle 7 Working accuracy test 21 7.1 General 21 7.2 Surface grinding 21 7.3 rail grinding 22 8 CNC axis positioning accuracy and repeatability of positioning accuracy 23 GB/T 5288-2007/ISO 4703.2001

Foreword

This standard is equivalent to international standards ISO 4703.2001 "Test conditions for gantry rail grinding machine accuracy test" (in English). This standard is equivalent translation ISO 4703.2001. For ease of use, this standard made the following editorial changes. --- In order to be consistent with other standards, the standard name will be changed to "gantry rail grinder precision testing"; --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- To ISO 4703.2001 and other international standards referenced with have been adopted in place of the corresponding international standard for our country standard; --- Increasing the reference standard GB/T 19660-2005; --- Remove the ISO 4703.2001 Foreword and Introduction; --- Remove the ISO 4703. Appendix A (informative Annex) 2001; --- Remove the "Found bias" Tolerance a bar. This standard replaces GB/T 5288-1985 "gantry rail grinder accuracy test." The main changes compared to 5288-1985 standard and GB/T as follows. --- Increased Chapter 2, "Normative references"; --- Increased Chapter 3, "and the term axis name"; --- Increased Chapter 8, "CNC axis positioning accuracy and repeatability"; --- Remove the "pre-tune test." The standards and supporting standards. --- JB/T 4147-1999 "gantry rail grinder technical conditions." The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee cutting machine technology (SAC/TC22) centralized. This standard was drafted. Shanghai Heavy Machine Tool Plant. The main drafters of this standard. Wuxian Qi, Yang first, Cai Xin. This standard superseded standard previously issued as follows. --- GB/T 5288-1985. GB/T 5288-2007/ISO 4703.2001 Gantry rail grinding machine accuracy test

1 Scope

This standard specifies the general use and general precision gantry rail grinder geometric accuracy, precision and positioning accuracy and repeatability given Check digit precision. This standard specifies the accuracy test corresponding tolerance. This standard applies only to straight line motion of the grinding table portable machine. Fixed table and rotary table machine is not a In the scope of this standard. This standard is only crawling noise machine for accuracy test, does not apply to the operation to check the machine (such as vibration, unusual, moving parts Etc.), does not apply to machine parameter checking (such as speed, feed rate, etc.). These checks should be carried out before testing the accuracy.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines (Eqv ISO 230-1.1996) GB/T 17421.2-2000 Test code for machine tools - Part 2. CNC axis positioning accuracy and repeatability of determination (Eqv ISO 230-2.1997) GB/T 19660-2005 Industrial automation systems and integration - Numerical control of machines and motion coordinate system named (ISO 841.2001, IDT)

3 Terms and axis name

This standard gives the terminology of the main components of the machine, according to GB/T 19660-2005 named axis. See terms and naming axis Figure 1 and Table 1. Note. The horizontal axis is considered to be when the main spindle axis (YZ and Vp -W) can be changed, then Q instead of R. In this case, the coordinates of each inspection Changes accordingly. Note. Figure in Notes 1 to 12 are shown in Table 1. Figure 1 GB/T 5288-2007/ISO 4703.2001

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5288-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5288-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5288-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5288-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5288-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5288-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.