|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4513.6-2017: Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4513.6-2017 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties
| Valid |
GB/T 4513.6-2017
|
PDF similar to GB/T 4513.6-2017
Basic data | Standard ID | GB/T 4513.6-2017 (GB/T4513.6-2017) | | Description (Translated English) | Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.080 | | Word Count Estimation | 14,158 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-09-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 4513.6-2017: Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Monolithic (unshaped) refractory products - Part 6. Measurement of physical properties
ICS 81.080
Q40
National Standards of People's Republic of China
Unshaped refractory material
Part 6. Determination of physical properties
Monolithic (unshaped) refractoryproducts-
Part 6.Measurementofphysicalproperties
(ISO 1927-6.2012, MOD)
2017-10-14 Published
2018-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
GB/T 4513 "amorphous refractory" is divided into the following eight sections.
--- Part 1. Introduction and classification;
--- Part 2. Sampling;
--- Part 3. Basic characteristics;
--- Part 4. Determination of fluidity of castables;
--- Part 5. Sample preparation and pretreatment;
--- Part 6. Determination of physical properties;
--- Part 7. Determination of preforms;
--- Part 8. Determination of special properties.
This section GB/T 4513 Part 6.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the redrafted law Amendment uses ISO 1927-6.2012 "amorphous refractory material Part 6. Physical properties of the test
set".
This part of the structure compared with ISO 1927-6.2012 compared to more adjustment, this section is listed in Appendix A and ISO 1927-6.
2012 chapter number control list.
This section there are technical differences compared with ISO 1927-6.2012, the provisions of these differences have been passed in the outer margin of the page margin
The vertical line (|) is marked. Appendix B lists the technical differences between this part and ISO 1927-6.2012 and its causes
Table.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This part of the National Refractories Standardization Technical Committee (SAC/TC193) and focal point.
This section is responsible for the drafting unit. Sinosteel Luoyang Refractory Research Institute Co., Ltd. Tongda Refractory Technology Co., Ltd., Shandong
Lu Ming New Materials Co., Ltd., Beijing Lear High Temperature Materials Co., Ltd., MCC Wuhan Metallurgical Construction Research Institute Co., Ltd.
The main drafters of this section. Zhang Yi, Liu Yunzheng, Feng Yunsheng, Bai Ming Xun, Zhao Zengzeng, Wang Kui, Guo Tengfei, Li Longfei, Jiang Dongmei, Ding Junjie,
Gao Long He, Liu Li, Wu Long water, Luo Huaming.
Unshaped refractory material
Part 6. Determination of physical properties
1 Scope
This section GB/T 4513 specifies the physical properties of amorphous refractory testing methods.
This section applies to the heat treatment before and after the heat treatment of dense castable, insulation castable, refractory ramming material, refractory plastic and dry material.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2997 dense shaped refractory products bulk density, apparent porosity and true porosity test method (GB/T 2997-2015,
ISO 5017.2013, MOD)
GB/T 3001 refractory room temperature bending strength test method (GB/T 3001-2007, ISO 5014.1997, MOD)
GB/T 3002 refractory high temperature bending strength test method (GB/T 3002-2004, ISO 5013.1985, MOD)
GB/T 4513.5 amorphous refractory - Part 5. Preparation and pretreatment of specimens (GB/T 4513.5-2017, ISO 1927-
5.2012, MOD)
GB/T 5071 refractory material density test method (GB/T 5071-2013, ISO 5018.1983, MOD)
GB/T 5072 refractory materials at room temperature compressive strength test method (GB/T 5072-2008, ISO 8895.2004, ISO 10059-
1.1992
GB/T 5073 refractory material creep test method (GB/T 5073-2005, ISO 3187.1989, MOD)
GB/T 5988 refractory heating permanent change test method (GB/T 5988-2007, ISO 2478.1987
ISO 2477.2005, MOD)
GB/T 5989 Refractory materials - Softening temperature test method Differential temperature rise method (GB/T 5989-2008, ISO 1893.
2005, IDT)
YB/T 370 Refractory materials - Test method for softening temperature
3 Determination of geometric bulk density
3.1 The scope of application
Geometrically determined, suitable for green, dry and heat treated specimens. The condition of the specimen shall be recorded in the test report.
3.2 Sample
Formed specimens should be one of the following.
A-shaped. 230 mm × 114 mm × 64 mm; B-shaped. 230 mm × 64 mm × 54 mm; C-shaped. 230 mm × 64 mm ×
64mm; D shape. 160mm x 40mm x 40mm.
In accordance with the relevant provisions of GB/T 4513.5 Preparation and storage of samples.
NOTE For ram and dry materials, a cylindrical specimen with a diameter of 50mm ± 1mm and a height of 50mm ± 1mm may be selected instead.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4513.6-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 4513.6-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 4513.6-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4513.6-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|