|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4513.3-2017: Monolithic (unshaped) refractory products -- Part 3: Characterization as received
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4513.3-2017 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Monolithic (unshaped) refractory products -- Part 3: Characterization as received
| Valid |
GB/T 4513.3-2017
|
PDF similar to GB/T 4513.3-2017
Basic data | Standard ID | GB/T 4513.3-2017 (GB/T4513.3-2017) | | Description (Translated English) | Monolithic (unshaped) refractory products -- Part 3: Characterization as received | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.080 | | Word Count Estimation | 14,170 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-09-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 4513.3-2017: Monolithic (unshaped) refractory products -- Part 3: Characterization as received
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Monolithic (unshaped) refractory products - Part 3. Characterization as received
ICS 81.080
Q40
National Standards of People's Republic of China
Unshaped refractory material
Part 3. Basic Features
Monolithic (unshaped) refractoryproducts-
Part 3.Characterizationasreceived
(ISO 1927-3.2012, MOD)
2017-10-14 Published
2018-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
GB/T 4513 "amorphous refractory" includes the following eight sections.
--- Part 1. Introduction and classification;
--- Part 2. Sampling;
--- Part 3. Basic characteristics;
--- Part 4. Determination of fluidity of castables;
--- Part 5. Sample preparation and pretreatment;
--- Part 6. Determination of physical properties;
--- Part 7. Determination of preforms;
--- Part 8. Determination of special properties.
This section GB/T 4513 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the redrafted law Amendment uses ISO 1927-3.2012 "amorphous refractory materials Part 3. Basic characteristics."
This part of the structure compared with ISO 1927-3.2012 more adjustments, Appendix A lists this part of ISO 1927-3.2012
Chapter number control list.
This section there is a technical difference compared with ISO 1927-3.2012, Appendix B lists this part of ISO 1927-3.2012
Technical differences and their causes list.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This part of the National Refractories Standardization Technical Committee (SAC/TC193) and focal point.
This part of the drafting unit. China Metallurgical Construction Research Institute Co., Ltd., Hunan Xiangtan Ruitai Technology Co., Ltd. Jinto Jinxin constant extension
Wen Material Co., Ltd., Gongyi Fifth Refractory Plant, Beijing Tongda Refractory Technology Co., Ltd.
The main drafters of this section. Zhang Xiuhua, Tian Zhihong, Gao Changhe, Zhao Yongan, Han Qisheng, Zeng Li Min, Xue Hongyan, Mei Minghua, Qian Yu,
Li Yanjing, Zeng Kun, school Songbo, Sun Lijun, Yang Jing.
Unshaped refractory material
Part 3. Basic Features
1 Scope
This section GB/T 4513 specifies unshaped refractory sampling, chemical composition determination, particle size distribution test, water content test may be
Plasticity index test and test report.
This section applies to castable (dense and heat insulation), spray paint, shotcrete, spray material, dry vibrating material and ramming material.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4513.1 amorphous refractory - Part 1 Introduction and classification (GB/T 4513.1-2016, ISO 1927-1.2012,
MOD)
GB/T 4513.2 amorphous refractory part 2. Sampling (GB/T 4513.2-2012, ISO 1927-2.2012, IDT)
GB/T 4984 zirconium containing refractory chemical analysis method
GB/T 5069 magnesium aluminum refractory chemical analysis methods
GB/T 5070 chromium-containing refractory chemical analysis methods
GB/T 6005 Test sieve wire mesh, perforated plate and electroformed sheet sieve basic dimensions (GB/T 6005-
2008, ISO 565.1990, MOD)
GB/T 6900 aluminum silicon refractory chemical analysis methods
Methods for chemical analysis of carbonaceous, silicon carbide, nitride refractory materials GB/T 16555
GB/T 21114 refractories X-ray fluorescence spectrochemical chemical analysis cast glass method (GB/T 21114-2007,
ISO 12677.2003, MOD)
GB/T 32177 Refractory materials Determination of B2O3 (GB/T 32177-2015, ISO 21078-1.2008, ISO 21078-2.
2006, MOD)
GB/T 32179 refractory chemical analysis wet method, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission
General requirements for spectrometry (ICP-AES) (GB/T 32179-2015, ISO 26845.2008, MOD)
3 sample
According to GB/T 4513.2 requirements for sampling, according to the needs of each independent test project to prepare the amount of test samples.
4 Determination of chemical composition
4.1 Sample Preparation
If ramming material supplied is wet, dry the sample according to 5.5.1 (see Chapter 3 for sampling methods). All samples must be round
Cone quadripped samples and ground the samples to the required particle size for chemical analysis.
Note. Chemical analysis includes the determination of ablation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4513.3-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 4513.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 4513.3-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4513.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|