|
US$349.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41052-2021: Full face tunnel boring machine - Remote monitoring system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41052-2021 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
Full face tunnel boring machine - Remote monitoring system
| Valid |
GB/T 41052-2021
|
PDF similar to GB/T 41052-2021
Basic data | Standard ID | GB/T 41052-2021 (GB/T41052-2021) | | Description (Translated English) | Full face tunnel boring machine - Remote monitoring system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Word Count Estimation | 18,183 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41052-2021: Full face tunnel boring machine - Remote monitoring system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Full face tunnel boring machine -- Remote monitoring system
ICS 91:220
CCSP97
National Standards of People's Republic of China
Full-section Tunnel Boring Machine Remote Monitoring System
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Requirements 2
5 Architecture 3
6 Function 4
7 Inspection 6
8 Accompanying Documents 6
Appendix A (normative) Local monitoring unit of typical roadheader collects basic data 7
Appendix B (informative) Project and construction data collected by the local monitoring unit of a typical roadheader 15
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Standardization Technical Committee of Construction Machinery and Equipment (SAC/TC328):
This document is drafted by: North Heavy Industry Group Co:, Ltd:, China Railway First Bureau Group Co:, Ltd:, Dalian University of Technology, China Railway Construction Heavy Industry Group Co:, Ltd:
Group Co:, Ltd:, China Railway Engineering Equipment Group Co:, Ltd:, China Water Resources and Hydropower Third Engineering Bureau Co:, Ltd:, Shijiazhuang Railway University,
State Key Laboratory of Shield and Tunneling Technology, Beijing Institute of Construction Mechanization Co:, Ltd:, CCCC Tianhe Machinery Manufacturing Co:, Ltd:,
Shandong University, Shenyang Jianzhu University, Shenyang University of Technology, Lixin Survey (Shanghai) Co:, Ltd:, China Construction Eighth Bureau Rail Transit Construction Co:, Ltd:,
Beijing Jiekong Technology Co:, Ltd:, Xinjiang Irtysh River Basin Development Project Construction Administration, Institute of Software, Chinese Academy of Sciences:
The main drafters of this document: Liu Shubing, Zhang Jiayou, Zhu Weidong, Huo Junzhou, He Enguang, Liu Feixiang, Zhuo Puzhou, Huang Jimin, Guo Jingbo,
Zeng Chuigang, Liu Shuang, Zhang Lin, Liu Bin, Liu Bo, Zhang Xiaori, Li Nianguo, Zhang Wentao, Shi Quan, Zhang Changyou, Sun Yanqiu, Zhao Shengguo, Xu Hong, Xue Lin,
He Boning, Yu Taizhang, Li Gang, Yang Shaopu, Gao Huizhong, Ma Xiaoli, Chen Mingjiang, Li Shucai, Chen Wenyuan, Zhou Peng, Li Qin, Yang Yuanwei, He Wei, Meng Fei,
Yang Feng, Wu Yong, Wu Jincheng, Tang Lixian, Wu Wenjia:
Full-section Tunnel Boring Machine Remote Monitoring System
1 Scope
This document specifies the requirements, structure, function, inspection, follow-up
line files, etc:
This document applies to the design, installation and acceptance of the remote monitoring system for full-section tunnel boring machines:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 4208 enclosure protection class (IP code)
GB/T 34354-2017 Terminology and commercial specifications for full-face tunnel boring machines
GB/T 35020-2018 Full-section tunnel boring machine single shield-earth pressure balance dual-mode boring machine
GB/T 41053-2021 Full-section Tunnel Boring Machine Earth Pressure Balance-Slurry Balance Dual-Mode Roadheader
3 Terms and Definitions
GB/T 34354-2017, GB/T 41053-2021 and GB/T 35020-2018 and the following terms and definitions apply
in this document:
3:1
full face tunnel boring machine
It is a special mechanical equipment with a peripheral shell to realize the full-section formation of the tunnel through excavation and push forward: Mainly include shield machine,
Rock tunnel boring machine, pipe jacking machine, etc:
[Source: GB/T 34354-2017, 2:1]
3:2
earth pressure balance shield machine; EPB
A shield machine that uses slag as the main medium to balance the formation pressure of the tunnel excavation surface and discharges slag through a screw conveyor:
[Source: GB/T 34354-2017, 2:8, with modifications]
3:3
Slurrybalancedshieldtunnelboringmachine
A shield machine that uses mud as the main medium to balance the formation pressure on the excavation surface of the tunnel and discharges slag through the mud conveying system:
3:4
opentypehardrocktunnelboringmachine
In the rock with better stability, the support shoe is used to support the tunnel wall to withstand the driving reaction force and torque, and the rock tunnel excavation without segment support
into the machine:
[Source: GB/T 34354-2017, 2:14, with modifications]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41052-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 41052-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41052-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41052-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|