|
US$498.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35019-2018: Full face tunnel boring machine -- Slurry shield machine
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35019-2018 | English | 498 |
Add to Cart
|
2 days [Need to translate]
|
Full face tunnel boring machine -- Slurry shield machine
| Valid |
GB/T 35019-2018
|
PDF similar to GB/T 35019-2018
Basic data | Standard ID | GB/T 35019-2018 (GB/T35019-2018) | | Description (Translated English) | Full face tunnel boring machine -- Slurry shield machine | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 91.220 | | Word Count Estimation | 32,315 | | Date of Issue | 2018-05-14 | | Date of Implementation | 2018-12-01 | | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 35019-2018: Full face tunnel boring machine -- Slurry shield machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Full face tunnel boring machine Slurry balance boring machine)
ICS 91.220
P97
National Standards of People's Republic of China
Full-face tunnel boring machine mud-water balance shield machine
Published on.2018-05-14
2018-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 basic parameters and model 4
5 Technical requirements 5
6 Test method 9
7 Inspection rules 16
8 accompanying documents 19
9 Signs, packaging and shipping 19
Appendix A (informative) Mud-water balance shield machine cutter disk torque calculation method 21
Appendix B (informative appendix) Mud-water balance shield machine shield thrust calculation method 24
Appendix C (informative appendix) Calculation method of mud-water balance shield machine mud circulation system 26
Appendix D (informative) Inspection record table 29
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Construction Machinery and Equipment Standardization Technical Committee (SAC/TC328).
This standard was drafted. Northern Heavy Industry Group Co., Ltd., China Water Resources and Hydropower Third Engineering Bureau Co., Ltd., China Power Construction Group Chengdu
Survey and Design Institute Co., Ltd., China Water Resources and Hydropower Fifth Engineering Bureau Co., Ltd., China Railway Engineering Equipment Group Co., Ltd., China Railway Construction
Heavy Industry Group Co., Ltd., Zhongjiao Tianhe Machinery Manufacturing Co., Ltd., Beijing Construction Mechanization Research Institute, Sichuan Ertan International Engineering Consulting
Limited liability company, Shanghai Tunnel Engineering Co., Ltd. Machinery Manufacturing Branch, China Railway 16th Bureau Group Co., Ltd., China Railway Fourth Survey and Design
Institute Group Co., Ltd., China Railway 14th Bureau Group Co., Ltd., Shanghai Tunnel Engineering Rail Transit Design and Research Institute.
The main drafters of this standard. Deng Liying, Wu Sirong, Huang Jimin, Hong Xingyuan, Kong Fanbin, Huang Changfu, Xiao Mingqing, Wang Huawei, Liu Jianwei,
Liu Shuang, Zhang Boyang, Cheng Yongliang, Wu Zhaoyu, Wang Dujuan, Song Zhenhua, Wang Yi, Zhao Hongqing, Liu Huibin, Zhao Haifeng, Ma Chengbiao, Chen Jinbo, Zhuang Yuwei,
Yang Shundong, Ren Liwei, Han Xiaoliang, He Xueguo, Yuan Liang, Quan Xueyong, Sun Wenqi, Chen Peng, Zhou Zizhen.
Full-face tunnel boring machine mud-water balance shield machine
1 Scope
This standard specifies the terms and definitions of the mud-water balance shield machine, basic parameters and models, technical requirements, test methods, inspection rules, and
Line documents, signs, packaging and shipping.
This standard applies to mud-water balance shield machines with circular cross-section.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 150 (all parts) pressure vessel
GB/T 191 packaging storage and transportation icon
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB 5226.3 Mechanical safety mechanical and electrical equipment - Part 11. Voltages above 1000Va.c. or 1500Vd.c.
Technical conditions for high-voltage equipment of 36kV
GB/T 6388 transport packaging receipt and delivery mark
GB/T 7932 Pneumatic pairing system and its components general rules and safety requirements
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
GB/T 14039 hydraulic transmission oil solid particle pollution level code
GB/T 17301 earthmoving machinery operation and maintenance space corners blunt
GB/T 20082 Hydraulic fluid transmission liquid contamination method for determining particle contamination by optical microscopy
GB/T 34354-2017 Full-face tunnel boring machine terminology and commercial specifications
GB/T 34650-2017 Full-section tunnel boring machine shield machine safety requirements
GB 50150 Electrical installation engineering electrical equipment handover test standard
GB 50168-2006 Specification for construction and acceptance of cable installations for electrical installations
JB/T 5000.3 General technical requirements for heavy machinery - Part 3. Welding parts
JB/T 5000.10-2007 General technical requirements for heavy machinery - Part 10. Assembly
JB/T 5000.11 General technical requirements for heavy machinery - Part 11.
JB/T 5000.13 General technical conditions for heavy machinery - Part 13. Packaging
JB/T 10205 hydraulic cylinder
3 Terms and definitions
The following terms and definitions as defined in GB/T 34354-2017 apply to this document. For ease of use, the following is repeated
Certain terms and definitions in GB/T 34354-2017.
3.1
Mud water balance shield machine slurryshieldmachine
The shield machine that balances the formation pressure of the tunnel excavation surface with the mud as the main medium and slag discharge through the mud conveying system.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35019-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 35019-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35019-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35019-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|