HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 34437-2017 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34437-2017: Test method of the oxygen permeability of the multilayer composite plastics pipe
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 34437-2017English279 Add to Cart 3 days [Need to translate] Test method of the oxygen permeability of the multilayer composite plastics pipe Valid GB/T 34437-2017

PDF similar to GB/T 34437-2017


Standard similar to GB/T 34437-2017

GB/T 37842   GB/T 33284   GB/T 32020   GB/T 45331   GB/T 34440   

Basic data

Standard ID GB/T 34437-2017 (GB/T34437-2017)
Description (Translated English) Test method of the oxygen permeability of the multilayer composite plastics pipe
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G33
Classification of International Standard 83.140.30
Word Count Estimation 14,158
Date of Issue 2017-10-14
Date of Implementation 2018-05-01
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34437-2017: Test method of the oxygen permeability of the multilayer composite plastics pipe

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of the oxygen permeability of the multilayer composite plastics pipe ICS 83.140.30 G33 National Standards of People's Republic of China Multi-layer composite plastic pipe oxygen Permeability test method (ISO 17455.2005, Plasticspipingsystems-Multilayerpipes- Determinationoftheoxygenpermeabilityofthebarrierpipe, MOD) 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses redrafted Law Amendment uses ISO 17455.2005 "plastic pipe system composite pipe barrier pipe oxygen penetration Performance Testing". This standard and ISO 17455.2005 technical differences and the reasons are as follows. --- Increased test pressure of 0.2MPa, to uniform test conditions; --- Increasing Figure 1 in the detection of the start time (t1) and the detection of the end of the time (t2), so that Figure 1 and the formula to better correspondence; --- Modify equation (3), an increase of parameters COX, t1, COX, t2 and its interpretation; --- Modify the symbol in Figure 2, ∫ o2, fin Sf, ∫ 6 = 0 o2, init Si, ∫ o2, abs with ΔS, in (7) and (10) in the corresponding replacement, so that users can easily understand; --- Added Chapter 10 c) temperature and pressure requirements in the test conditions to clarify the test conditions in the test report. This standard made the following editorial changes. --- Remove the test device calibration and test preparation chapter, the relevant content to move to the chapter of the test steps; --- Added Appendix B (informative) "experimental device schematic diagram." Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard proposed by the China Light Industry Federation. This standard by the National Plastics Standardization Technical Committee (SAC/TC48) centralized. This standard was drafted unit. National Chemical Building Materials Testing Center (Materials Testing Division), Zhejiang Weixing New Building Materials Co., Ltd. China Aviation Planning and Design Institute Co., Ltd., Icahn Enterprise Group (Shanghai) Co., Ltd., Kuraray International Trade (Shanghai) Co., Ltd., Rifeng Enterprise Group Co., Ltd., China Petrochemical Co., Ltd. Beijing Yanshan Branch Institute of resin applications. The main drafters of this standard. Li Yu, Wu Zhijun, Li Dazhi, Zhao Jie, Qiu Qiang, Zhou Bin, Jin Jijing, Chen Hong is willing. Multi-layer composite plastic pipe oxygen Permeability test method

1 Scope

This standard specifies the two kinds of test methods of oxygen permeability of multi-layer composite plastic pipe (hereinafter referred to as pipe), dynamic method (method I, Arbitration method) and static method (method Ⅱ). This standard applies to hot and cold water transport with multi-layer composite plastic pipe. Single-layer plastic pipe oxygen permeability test can refer to this standard. Note that in principle, the two methods get the same conclusion.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6111 thermoplastic piping fluid resistance pressure test method (GB/T 6111-2003, ISO 1167.1996, IDT) GB/T 8806 Plastics piping systems - Determination of dimensions of plastic parts (GB/T 8806-2008, ISO 3126.2005, IDT)

3 principle

The oxygen permeability of a multilayer composite plastic pipe is expressed as the amount of oxygen permeated through the wall of the sample under specified conditions. The amount of penetration passed Determination of closed system of dissolved oxygen concentration in water (referred to as oxygen concentration) value obtained. Determination should limit the oxygen can only pass through the sample tube wall Instead of infiltration of other parts.

4 Terms and definitions

The following terms and definitions apply to this document. 4.1 Multi-layer composite pipe multilayercompositepipe Tubes made of multiple layers of different materials. 4.2 M-type multilayer pipe multilayerMpipe Tubes composed of multiple layers of polymer and one or more layers of metal. 4.3 P-type multilayer pipe multilayerPpipe Tubes made of two or more layers of polymer. 4.4 Oxygen barrier layer Block or substantially reduce the permeation of oxygen from the outside of the tubing into the barrier within the tube.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34437-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34437-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34437-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34437-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.