|
US$434.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33523.701-2017: Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33523.701-2017 | English | 434 |
Add to Cart
|
3 days [Need to translate]
|
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments
| Valid |
GB/T 33523.701-2017
|
PDF similar to GB/T 33523.701-2017
Basic data | Standard ID | GB/T 33523.701-2017 (GB/T33523.701-2017) | | Description (Translated English) | Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.20 | | Word Count Estimation | 23,270 | | Date of Issue | 2017-02-28 | | Date of Implementation | 2017-09-01 | | Quoted Standard | GB/T 19067.1-2003; GB/T 19600-2004; ISO 3274; ISO 5436-2; ISO 12085; ISO/TS 12181-1; ISO/TS 12780-1; ISO/TS 12781-1; ISO/TS 14253-2; ISO 25178-2; ISO 25178-601; ISO/IEC GUIDE 99-2007 | | Adopted Standard | ISO 25178-701-2010, IDT | | Regulation (derived from) | National Standard Announcement No. 4 of 2017 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the regional method for surface contact (stylus) instruments: - the characteristics of physical gauges used as measurement standards; - the method of assessing residual errors; - the method of detection, acceptance and periodic verification. This standard applies to the physical measurement standards used to calibrate or verify the regional method of surface contact (stylus) instruments. | GB/T 33523.701-2017: Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS) - Surface texture. Areal - Part 701. Calibration and measurement standards for contact (stylus) instruments
ICS 17.040.20
J04
National Standards of People's Republic of China
Product Geometry Specification (GPS)
Surface area method
Part 701. contact (stylus) instrument
Calibration and measurement standards
Geometricalproductspecifications (GPS) -Surfacetexture. Areal-
Part 701. Calibrationandmeasurementstandardsforcontact (stylus)
instruments
(ISO 25178-701..2010, IDT)
2017-02-28 release.2017-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 33523 "Geometrical Product Specifications (GPS) surface structure area method" is divided into the following parts.
- Part 2. terms, definitions and surface structure parameters;
- Part 3. Standardized operational set;
- Part 6. Classification of surface structure measurement methods;
- Part 7. Software measurement standards;
- Part 601. Nominal characteristics of contact (stylus) instruments;
- Part 602. Nominal characteristics of non - contact (confocal color difference probe) instruments;
- Part 603. Nominal characteristics of non - contact (phase - shift interference microscopy) instruments;
- Part 604. Nominal characteristics of non - contact (coherent scanning interference) instruments;
- Part 605. Nominal characteristics of non - contact (point auto - focus) instruments;
- Part 701. Calibration and measurement of contact (stylus) instruments.
This part is part 701 of GB/T 33523.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part is equivalent to ISO 25178-701..2010 "Product Geometry Technical Specification (GPS) Surface Structure Area Act Section 701
Points. contact (stylus) instrument calibration and measurement standards.
In this part of the normative reference to the international documents have a consistent correspondence between the following documents.
--- GB/T 6062-2009 Geometrical product specifications (GPS) Surface structure Contour method Contact (stylus)
Volume characteristics (ISO 3274..1996, IDT)
GB/T 18618-2009 Geometrical Product Specifications (GPS) Surface Structure Contour Method Graphic Parameters (ISO 12085.
1997, IDT)
GB/T 18779.2-2004 Geometrical product specifications (GPS) - Measurement of workpiece and measuring equipment - Part 2.
Guidance on the assessment of uncertainty in GPS measurement and ISO testing (ISO /T S14253-2..1999, IDT)
GB/T 19067.2-2004 Geometrical product specifications (GPS) - Surface texture contouring method - Part 2.
. Software measurement standard (ISO 5436-2..2001, IDT)
Geometrical product specifications (GPS) - Flatness - Part 1. Glossary and parameters (ISO /
TS12781-1..2003, IDT)
Geometrical product specifications (GPS) - Straightness - Part 1. Glossary and parameters (ISO /
TS12780-1..2003, IDT)
Geometrical product specifications (GPS) Roundness - Part 1. Glossary and parameters (ISO /
TS12181-1..2003)
GB/T 33523.601-2017 Geometrical product specifications (GPS) - Surface area method - Part 601. Contact
(ISO 25178-601..2010, IDT)
Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents.
This part of the National Product Geometric Technical Standardization Technical Committee (SAC/TC240) proposed and centralized.
This part of the drafting unit. Hangzhou Chang Geng Measurement Technology Co., Ltd., Beijing times the peak Technology Co., Ltd., Harbin Measuring Tool Group
Limited liability company, Huazhong University of Science and Technology, in the machine productivity promotion center.
The main drafters of this part. Zhao Jun, Hao Jianguo, Lu Xuzhi, Lang Yanmei, Liu Xiaojun, Chen Jingyu.
Product Geometry Specification (GPS)
Surface area method
Part 701. contact (stylus) instrument
Calibration and measurement standards
1 Scope
This part of GB/T 33523 specifies a regional method for surface contact (stylus) instruments.
--- the characteristics of the physical gage used as a measuring standard;
The method of assessing the residual error;
Calibration methods for calibration, acceptance and periodic verification.
This part applies to the physical measurement standard used to calibrate or verify the regional method surface contact (stylus) instrument.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 19067.1-2003 Geometrical product specifications (GPS) - Surface texture contouring - Measurement standards - Part 1.
Physical measurement standard (ISO 5436-1..2000, IDT)
GB/T 19600-2004 Geometrical Product Specifications (GPS) Surface Structure Contour Method Contact (stylus)
Quasi (ISO 12179..2000, IDT)
ISO 3274 Geometrical product specifications (GPS) Surface structure Profile method Metering characteristics of contact (stylus) instruments (Geo-
metricalProductSpecifications (GPS) -Surfacetexture. Profilemethod-Nominalcharacteristicsof
contact (stylus) instruments)
ISO 5436-2 Geometrical product specifications (GPS) - Surface texture contouring - Measurement standards - Part 2. Software measurement
Standard (GeometricalProductSpecifications (GPS) -Surfacetexture. Profilemethod; Measurementstand-
ards-Part 2. Softwaremeasurementstandards)
ISO 12085 Product Geometry Technical Specification (GPS) Surface Structure Contour Method Graphic Parameters (GeometricalProduct
Specifications (GPS) -Surfacetexture. Profilemethod-Motifparameters)
ISO /T S12181-1 Geometrical product specifications (GPS) Roundness - Part 1. Glossary and parameters (GeometricalProduct
Specifications (GPS) -Roundness-Part 1. Vocabularyandparametersofroundness
ISO /T S12780-1 Geometrical product specifications (GPS) Straightness - Part 1. Glossary and parameters (Geometrical
ProductSpecifications (GPS) -Straightness-Part 1. Vocabularyandparametersofstraightness)
ISO /T S12781-1 Geometrical product specifications (GPS) Flatness - Part 1. Glossary and parameters (Geometrical
ProductSpecifications (GPS) -Flatness-Part 1. Vocabularyandparametersofflatness)
ISO /T S14253-2 Geometrical product specifications (GPS) - Measurement of workpieces and measuring equipment - Part 2. Measuring equipment
GeometricalProductSpecifications (GPS) -Inspec- tion for GPS measurement in calibration and product inspection (GeometricalProductSpecifications (GPS)
tionbymeasurement ofworkpiecesandmeasuringequipment-Part 2. Guidetotheestimationofun-
certaintyinGPSmeasurement, incalibrationofmeasuringequipmentandinproductverification
|