|
US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26968-2023: Feed machinery - Nominating method for product model
Status: Valid GB/T 26968: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26968-2023 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Feed machinery - Nominating method for product model
| Valid |
GB/T 26968-2023
|
| GB/T 26968-2011 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Feed machinery -- Editorial nominating method for model designation
| Obsolete |
GB/T 26968-2011
|
PDF similar to GB/T 26968-2023
Basic data | Standard ID | GB/T 26968-2023 (GB/T26968-2023) | | Description (Translated English) | Feed machinery - Nominating method for product model | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B93 | | Classification of International Standard | 65.060 | | Word Count Estimation | 22,258 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Older Standard (superseded by this standard) | GB/T 26968-2011 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 26968-2023: Feed machinery - Nominating method for product model---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65:060
CCSB93
National Standards of People's Republic of China
Replacing GB/T 26968-2011
Model preparation method of feed machinery products
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Preparation method 1
4:1 Model Composition 1
4:2 Preparation scheme 2
Appendix A (informative) Some commonly used feed machinery product models compilation scheme 9
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 26968-2011 "Methods for Compilation of Models of Feed Machinery Products": Compared with GB/T 26968-2011, except
Apart from structural adjustments and editorial changes, the main technical changes are as follows:
a) The category of "ultrafine pulverization equipment" is added, code-named "WF" (see Table 1);
b) Change the type name of "cleaning equipment" to "screening equipment", and change the category code from "QL" to "SL" (see Table 1,:2011 edition
table1);
c) Deleted the type of "quantitative packaging equipment" (see Table 1 of the:2011 edition);
d) The model codes of 39 products have been changed, the model codes of 74 products have been added, and the model codes of 29 products have been deleted (see
Table 2, Table 2 of the:2011 edition);
e) Added specification requirements for some products (see Table 3):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Feed Machinery Standardization Technical Committee (SAC/TC384):
This document was drafted by: Guoliang Wuhan Scientific Research and Design Institute Co:, Ltd:, Jiangsu Fengshang Intelligent Technology Co:, Ltd:, Chia Tai Investment Co:, Ltd:
Co:, Ltd:, Buhler (Changzhou) Machinery Co:, Ltd:
The main drafters of this document: Xie Jian, Yang Xihua, Chen Hui, Wang Mei, Jiang Mingming, Shao Laimin, Jiang Zuokui, Shi Yuping, Zhao Yin:
This document was first published in:2011, and this is the first revision:
Model preparation method of feed machinery products
1 Scope
This document describes the preparation method of feed machinery product model:
This document is applicable to the model compilation of feed machinery products:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 10647 Feed Industry Terminology
GB/T 18695 Feed Processing Equipment Terminology
3 Terms and Definitions
The terms and definitions defined in GB/T 10647 and GB/T 18695 apply to this document:
4 Preparation method
4:1 Model Composition
4:1:1 The product model is composed of category code, type code, main specifications and improved design serial number, expressed as follows:
□□
Category code
□□
Type code
□×□-□
main specifications
Improved design serial number
Note: The main specifications of individual equipment can be expressed as □/□-□:
4:1:2 Category code: It is represented by two uppercase "Chinese Pinyin letters" (hereinafter referred to as "letters"), and the product name is selected to represent the product category
The first letters of the two Chinese characters of other keywords:
4:1:3 Type code: It is represented by one or two uppercase letters, generally one or two characters representing the structural type or operating mode are selected:
The initials of two Chinese characters, and the initials of English words in special cases:
4:1:4 Main specifications: represented by Arabic numerals (hereinafter referred to as "numbers"), generally choose the size and number of main parts of the product or the main
Numerical representations such as structural parameters or main performance parameters are required: If there are two or more main specifications, they can be written consecutively, with "×" or "-" symbol
Separation; use "×" between values with the same measurement unit, and "-" between values with different measurement units: Specification values are generally expressed in integers (required
If decimals are used, take one decimal), without marking the unit of measurement; the number of main components is indicated by "-" followed by numbers, and only one piece is not marked
number of pieces:
4:1:5 Improved design serial number: represented by a capital letter:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26968-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 26968-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26968-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26968-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 26968-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26968-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|