|
US$699.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26862-2025: Test specifications of synchrophasor measurement device for power systems
Status: Valid GB/T 26862: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26862-2025 | English | 699 |
Add to Cart
|
5 days [Need to translate]
|
Test specifications of synchrophasor measurement device for power systems
| Valid |
GB/T 26862-2025
|
| GB/T 26862-2011 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Test specifications for synchrophasor measurement unit for power systems
| Valid |
GB/T 26862-2011
|
PDF similar to GB/T 26862-2025
Basic data | Standard ID | GB/T 26862-2025 (GB/T26862-2025) | | Description (Translated English) | Test specifications of synchrophasor measurement device for power systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N22 | | Classification of International Standard | 17.220.20 | | Word Count Estimation | 34,388 | | Date of Issue | 2025-05-30 | | Date of Implementation | 2025-12-01 | | Older Standard (superseded by this standard) | GB/T 26862-2011 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 26862-2025: Test specifications of synchrophasor measurement device for power systems---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 17.220.20
CCSN22
National Standard of the People's Republic of China
Replaces GB/T 26862-2011
Specification for testing of synchronous phasor measurement devices in power systems
Released on 2025-05-30
2025-12-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Test conditions 3
4.1 Test atmospheric conditions 3
4.2 Standard test conditions 3
4.3 Detection system environment architecture 3
4.4 Test standard source 4
4.5 Reference conditions for influencing quantities 4
4.6 Error calculation conditions 4
5 Synchronized Phasor Measurement Unit 5
5.1 Structural and Appearance Inspection 5
5.2 Self-test function test 5
5.3 Condition monitoring function test 6
5.4 Data storage function test 6
5.5 Low frequency oscillation alarm function detection 6
5.6 times/super synchronous oscillation monitoring function detection 6
5.7 Continuous recording function test 6
5.8 Sampled data event identification function detection 6
5.9 Power consumption detection 7
5.10 Dynamic data recording function test 7
5.11 Data security testing 7
5.12 Data output mode detection 7
5.13 Trigger function detection 8
5.14 Abnormal detection of sampled value (SV) of digital input synchronous phasor measurement unit 8
5.15 Static performance test 8
5.16 Dynamic performance test 10
5.17 Time synchronization function test 13
5.18 Power supply impact detection 14
5.19 Environmental conditions affecting detection 14
5.20 Insulation performance test 14
5.21 Thermal stability test 16
5.22 Electromagnetic compatibility testing 16
5.23 Mechanical properties test 17
5.24 Communication Detection 17
5.25 Continuous power-on stability test 19
6 Phase data concentrator 19
6.1 Structural and Appearance Inspection 19
6.2 Self-test function test 19
6.3 Condition monitoring function test 20
6.4 Data storage function test 20
6.5 Redundant Network Function Detection 20
6.6 Power consumption detection 20
6.7 Dynamic data recording function detection 20
6.8 Data security testing 20
6.9 Time synchronization function detection 20
6.10 Power supply impact detection 20
6.11 Environmental conditions affecting detection 21
6.12 Insulation performance test 21
6.13 Electromagnetic compatibility testing 21
6.14 Mechanical properties testing 22
6.15 Communication Detection 22
6.16 Continuous power-on stability test 23
7 Inspection Rules 23
7.1 Inspection categories 23
7.2 Type test 23
7.3 Factory Inspection 23
7.4 Field Test 23
Appendix A (Normative) PMU Accuracy Test Method 25
A.1 Method 1.Standard source method 25
A.2 Method 2.Calibrator method 25
Appendix B (Informative) Digital Simulation Test 26
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 26862-2011 "Testing Specification for Synchronous Phase Measurement Devices in Power Systems" and is consistent with GB/T 26862-2011.
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Added the terms and definitions of synchronized phasor, synchronized phasor measurement device, synchronized phasor measurement unit and phasor data concentrator (see
Chapter 3);
b) Added content on test conditions (see Chapter 4);
c) Added basic function test items (see 5.2, 5.3, 5.4, 5.6, 5.7, 5.8);
d) Added the detection content of digital input synchronous phasor measurement unit (see 5.9, 5.14);
e) The inspection items of dynamic and static tests have been changed and the contents have been refined (see 5.15, 5.16, 3.3 of the.2011 edition);
f) Added time synchronization detection content. time synchronization interface configuration check, time synchronization accuracy test, leap second processing function test,
Time synchronization monitoring function check (see 5.17, 6.9.2);
g) The contents of the electromagnetic compatibility test items have been changed (see 5.22, 3.15 of the.2011 edition);
h) Added DL/T 860 (all parts) transmission protocol detection (see 5.24.4);
i) Added phasor data concentrator detection content (see Chapter 6);
j) Changed the “comparison method” in the test method to “calibrator method” (see Appendix A, Appendix A of the.2011 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Electricity Council.
This document is under the jurisdiction of the National Technical Committee for Standardization of Power System Management and Information Exchange (SAC/TC82).
This document was drafted by. China Electric Power Research Institute Co., Ltd., China Electric Power Engineering Consulting Group North China Electric Power Design Institute Co., Ltd.
China Southern Power Grid Co., Ltd., State Grid Electric Power Research Institute Co., Ltd., Beijing Sifang Relay Protection Co., Ltd.
Automation Co., Ltd., China Electric Power Purui Electric Power Engineering Co., Ltd., North China Electric Power University, State Grid Jiangxi Electric Power Co., Ltd. Power Supply Services
Management Center, Beijing Bodian Xinli Electric Co., Ltd., Guodian Nanjing Automation Co., Ltd., Changyuan Shenrui Jibao Automation Co., Ltd.
Company, Nanjing NARI Relay Protection Electric Co., Ltd., NARI Technology Co., Ltd., China Southern Power Grid Research Institute Co., Ltd.,
State Grid Jiangsu Electric Power Co., Ltd., Dongfang Electronics Co., Ltd., State Grid Zhejiang Electric Power Co., Ltd., State Grid Shanghai Electric Power Company, State Grid
Henan Electric Power Co., Ltd. Electric Power Research Institute, Xuji Electric Co., Ltd. Technology Center, State Grid Jiangsu Electric Power Co., Ltd.
Scientific Research Institute, North China Electric Power Research Institute Co., Ltd., State Grid Jibei Electric Power Co., Ltd., Jiangsu Jinzhi Technology Co., Ltd.,
Aerospace Yinshan Electric Co., Ltd., Jiangxi Bada Electronics Co., Ltd., and State Grid Shanxi Electric Power Company Electric Power Research Institute.
The main drafters of this document are. Li Jinsong, Zhang Daonong, Wang Yongfu, Li Jin, Zhao Mingyang, Yu Yuehai, Shi Boyan, Xu Yong, Bi Tianshu, Chang Naichao,
Pei Maolin, Zhu Xiaopeng, Wen Fuguang, Li Qiang, Wang Liang, Hou Mingguo, Xu Quan, Zhang Qibing, Wang Zhihua, Du Qiwei, Fang Chen, Zhang Jiangnan, Yu Gaowang, Zheng Mingzhong,
Bian Baoyin, Liu Hao, Wang Changrui, Han Kai, Shen Jun, Yan Yongsheng, Li Lihua, Zhang Jinhu, Li Wenzhuo, Shen Yan, Tang Zhen.
The previous versions of this document and the documents it replaces are as follows.
---First released in.2011;
---This is the first revision.
Introduction
This document aims to provide the detection environment, detection items, detection and evaluation methods for synchronized phasor measurement devices in power automation systems.
At present, the current domestic standard GB/T 26865.2 "Power System Real-time Dynamic Monitoring System Part 2.Data Transmission Protocol" and
DL/T 280 "General Technical Requirements for Synchronous Phasor Measurement Devices in Power Systems" is closely related to this document.
The communication protocol of the measuring device is specified in DL/T 280, and the technical requirements of the synchronous phasor measuring device are specified in DL/T 280.
The three standards are used together to standardize the detection and evaluation methods of synchronous phasor measurement devices in power systems.
It provides a basis and reference for the research and development, production, testing and application of measurement devices.
Specification for testing of synchronous phasor measurement devices in power systems
1 Scope
This document specifies the test conditions, test items, test methods, inspection rules, test result judgment of the synchronous phasor measurement device of the power system.
Determination and detection cycle.
This document applies to the development, production and testing (including type testing, factory inspection and field testing) of synchronized phasor measurement devices.
The development and testing of phasor measurement device products can be carried out as a reference.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2423.1 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature
GB/T 2900.1 Basic terms of electrical engineering
GB/T 2900.17 Electrical terminology - Electrical relays
GB/T 13729-2019 Telecontrol terminal equipment
GB/T 14598.24 Measuring relays and protection devices Part 24.Power system transient data exchange (COMTRADE) communication
Use format
GB/T 15153.2-2000 Telecontrol equipment and systems Part 2.Working conditions Part 2.Environmental conditions (climate, machinery and
Other non-electrical factors)
GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test
GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test
GB/T 17626.5-2019 Electromagnetic compatibility test and measurement technology surge (impact) immunity test
GB/T 17626.6-2017 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity
GB/T 17626.8-2006 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test
GB/T 17626.9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility test and measurement technology Damped oscillation magnetic field immunity test
GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage dips, short interruptions and voltage variations immunity
test
GB/T 17626.18-2016 Electromagnetic compatibility test and measurement technology Damped oscillation wave immunity test
GB/T 17626.29-2006 Electromagnetic compatibility test and measurement technology DC power input port voltage sag, short interruption and
Voltage variation immunity test
GB/T 19520.12-2009 Electronic equipment mechanical structure 482.6mm (19in) series mechanical structure dimensions Part 3-101.
Plug-in boxes and their plug-ins
GB/T 26865.2 Power system real-time dynamic monitoring system Part 2.Data transmission protocol
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26862-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 26862-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26862-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26862-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 26862-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26862-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|