|
US$759.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20141-2018: Formed wire concentric lay overhead electrical stranded conductors
Status: Valid GB/T 20141: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20141-2018 | English | 759 |
Add to Cart
|
6 days [Need to translate]
|
Formed wire concentric lay overhead electrical stranded conductors
| Valid |
GB/T 20141-2018
|
| GB/T 20141-2006 | English | 839 |
Add to Cart
|
5 days [Need to translate]
|
Overhead electrical conductors -- Formed wire, concentric lay, stranded conductors
| Obsolete |
GB/T 20141-2006
|
PDF similar to GB/T 20141-2018
Basic data | Standard ID | GB/T 20141-2018 (GB/T20141-2018) | | Description (Translated English) | Formed wire concentric lay overhead electrical stranded conductors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K11 | | Classification of International Standard | 29.060.10 | | Word Count Estimation | 38,350 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-07-01 | | Older Standard (superseded by this standard) | GB/T 20141-2006 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 20141-2018: Formed wire concentric lay overhead electrical stranded conductors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Formed wire concentric lay overhead electrical stranded conductors
ICS 29.060.10
K11
National Standards of People's Republic of China
Replace GB/T 20141-2006
Concentric stranded overhead conductor
(IEC 62219.2002, Overheadelectricalconductors-Formedwire,
Concentriclay, strandedconductors, MOD)
Published on.2018-12-28
2019-07-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword I
1 Scope 1
2 Normative references 2
3 Terms and Definitions 2
4 wire requirements 3
5 Test 7
6 packaging and signs 10
Appendix A (informative) This standard and IEC 62219.2002 chapter number comparison list 12
Appendix B (informative) List of technical differences between this standard and IEC 62219.2002 and their causes
Appendix C (informative) Recommended wire size and wire performance Table 15
Appendix D (informative) Model representation of the type of concentric stranded overhead conductors 29
Appendix E (Normative) The nominal mass of the anti-corrosion grease for the concentric stranded conductors
Appendix F (Normative Appendix) Stress-Strain Test Method 32
Appendix G (Normative Appendix) Information provided by the acquirer 35
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 20141-2006 "type line concentric stranded overhead conductor", compared with GB/T 20141-2006 main technical changes
The following is as follows.
--- Added L1, L2, L3 hard aluminum profiles, increased LHA3, LHA4 aluminum alloy profiles, and removed grade B galvanized steel
Core, added LB14, LB20A aluminum clad steel wire (see 1.1, Chapter 1 of the.2006 edition);
--- Increased the model and name of the type of concentric stranded overhead conductor (see 1.2);
--- Removed the definition of aluminum (3.1 version of.2006);
--- Revised the definition of the twisted direction and merged the two definitions (see 3.3, 3.4 of the.2006 edition);
--- Removed the definition of the compaction factor (see 3.6 of the.2006 edition);
--- Increased cross-sectional shape definition (see 3.7);
--- Increased the resistivity of L1, L2, L3, LHA3, LHA4 (see 4.1, 5.1 of the.2006 edition);
--- Removed the marking system (Chapter 4 of the.2006 edition);
--- Removed the production process of the forming line (5.2 of.2006 edition);
--- Revised the representation of the pitch-to-diameter ratio of the steel strand and the conductor strand, and modified the column into a tabular form (see 4.5.3,.2006 edition)
5.5.3 and 5.5.4);
--- Revised the provisions of the joint production method (see 4.6.6,.2006 version of 5.6.6);
--- Added joint strength specification for aluminum alloy wire, deleted Note 1 and Note 2 in the.2006 edition (see 4.6.7, 5.6.6 of.2006 edition);
---Modified some of the standard increments caused by the twisting (see Table 4, Table 2 of the.2006 edition);
--- Increased the twisting increment of aluminum alloy core aluminum wire strands (see Table 5);
--- Calculate the breaking force of steel (aluminum-clad steel) core type stranded wire when adding 4 layers of aluminum (aluminum alloy) stranded wire (see 4.8.2,.2006 edition)
5.8.2);
--- Increased the calculation method of DC resistance (see 4.9);
--- Increased the DC resistance requirements of the wire (see 5.2.1,.2006 edition of 6.2.1);
--- Increased wire DC resistance test method (see 5.5.5);
--- Added inspection of single line resistivity (see 5.6.7).
This standard uses the redrafting method to modify the use of IEC 62219.2002 "overhead wire type concentric stranded wire".
This standard has more structural adjustments than IEC 62219.2002. Appendix A lists this standard and IEC 62219.2002.
The chapter number change comparison checklist.
There are technical differences between this standard and IEC 62219.2002, and the terms involved in these differences have been passed on the outer margins of the margins.
The vertical single line (|) is marked, and a list of the corresponding technical differences and their causes is given in Appendix B.
This standard has made the following editorial changes.
--- Change the standard name to "Lineline Concentric Stranded Aerial Wire";
---4.1 added the resistivity of L1, L2, L3, LHA3, LHA4;
--- Change the form of the twisted joint diameter of the wire in IEC 62219.2002 from the form expressed in the text to the form expressed in the table;
--- Amendment IEC 62219.2002 Appendix D is Appendix C of this standard, deletes D.1 of Appendix D of IEC 62219.2002 and
D.2; Revised the recommended wire size and performance table for aluminum wire strands and steel core aluminum stranded wires, and added aluminum alloy wire strands
Wire, aluminum alloy core aluminum wire stranded wire, steel core aluminum alloy wire stranded wire, aluminum clad steel core aluminum wire stranded wire and aluminum clad steel core aluminum alloy wire
Wire size and performance table of the stranded wire;
--- Added Appendix D.
This standard was proposed by the China Electrical Equipment Industry Association.
This standard is under the jurisdiction of the National Bare Wire Standardization Technical Committee (SAC/TC422).
This standard was drafted. Shanghai Cable Research Institute Co., Ltd., Shanghai National Cable Testing Center Co., Ltd., Jiangsu Zhongtian Technology Co., Ltd.
Company, Jiangsu Hengtong Power Special Wire Co., Ltd., Hangzhou Cable Co., Ltd., Far East Cable Co., Ltd., Guangdong Yuanguang Cable Industry Co., Ltd.
Co., Ltd., Jiangsu Tongguang Power Transmission Technology Co., Ltd., Aerospace Electric Group Co., Ltd., Qingdao Han Cable Co., Ltd., Wuxijiang
South Cable Co., Ltd., TBEA Co., Ltd. Xinjiang Cable Factory.
The main drafters of this standard. Dang Peng, Wang Wei, Xie Shuhong, Zhu Hongliang, Hu Jianming, Xu Jing, Jiang Luzhen, Shi Haifeng, Liang Hongping, Zhao Xinyuan,
Zhang Chuansheng, Hu Zhengrui, Zheng Qiu, Hu Yuanwei, Lu Guoqin.
The previous versions of the standards replaced by this standard are.
---GB/T 20141-2006.
Concentric stranded overhead conductor
1 Scope
1.1 This standard specifies the electrical and mechanical properties of the profiled concentric stranded conductors. This standard applies to the type of concentric stranded overhead conductors.
The profiled concentric stranded overhead conductor is composed of one of the following metal single wires in a), or a combination of two metal single wires;
A metal single wire can be combined with any single metal wire of b), c).
a) Aluminum and aluminum alloys.
L, L1, L2, L3 hard aluminum wire, in line with the requirements of GB/T 17048-2017;
LX (1, 2), L1X (1, 2), L2X (1, 2), L3X (1, 2) hard aluminum wire before twisting, in line with GB/T 17048-2017 equivalent
Single wire diameter hard aluminum wire requirements;
LHA1, LHA2 aluminum alloy wire, in line with the requirements of GB/T 23308-2009;
LHA1X (1, 2), LHA2X (1, 2) twisted aluminum alloy wire, in line with the equivalent single wire diameter of GB/T 23308-2009
Alloy wire requirements;
LHA3, LHA4 aluminum alloy wire, in line with the requirements of NB/T 42042-2014;
LHA3X (1, 2), LHA4X (1, 2) twisted front aluminum alloy wire, in line with NB/T 42042-2014 equivalent single wire diameter aluminum
Alloy wire requirements.
b) G1A, G2A, G3A steel wire, in line with the requirements of GB/T 3428-2012.
c) LB14, LB20A aluminum-clad steel wire, in line with the requirements of GB/T 17937-2009.
1.2 The model and name of each type of wire concentric stranded overhead conductor product included in this standard are shown in Table 1.
Table 1 Model and name of the wire
Model Name
JLX1, JLX2, JL1X1, JL1X2, JL2X1, JL2X2, JL3X1, JL3X2 aluminum wire strand
JLHA1X1, JLHA1X2, JLHA2X1, JLHA2X2
JLHA3X1, JLHA3X2, JLHA4X1, JLHA4X2
Aluminum alloy wire strand
JLX1/LHA1, JLX2/LHA1, JLX1/LHA2, JLX2/LHA2
JL1X1/LHA1, JL1X2/LHA1, JL1X1/LHA2, JL1X2/LHA2
JL2X1/LHA1, JL2X2/LHA1, JL2X1/LHA2, JL2X2/LHA2
JL3X1/LHA1, JL3X2/LHA1, JL3X1/LHA2, JL3X2/LHA2
Aluminum alloy core aluminum wire strand
JLX1/G1A, JLX2/G1A, JLX1/G2A, JLX2/G2A, JLX1/G3A, JLX2/G3A
JL1X1/G1A, JL1X2/G1A, JL1X1/G2A, JL1X2/G2A, JL1X1/G3A, JL1X2/G3A
JL2X1/G1A, JL2X2/G1A, JL2X1/G2A, JL2X2/G2A, JL2X1/G3A, JL2X2/G3A
JL3X1/G1A, JL3X2/G1A, JL3X1/G2A, JL3X2/G2A, JL3X1/G3A, JL3X2/G3A
Steel core aluminum wire strand
JLHA1X1/G1A, JLHA2X1/G1A, JLHA3X1/G1A, JLHA4X1/G1A
JLHA1X2/G1A, JLHA2X2/G1A, JLHA3X2/G1A, JLHA4X2/G1A
JLHA1X1/G2A, JLHA2X1/G2A, JLHA3X1/G2A, JLHA4X1/G2A
JLHA1X2/G2A, JLHA2X2/G2A, JLHA3X2/G2A, JLHA4X2/G2A
JLHA1X1/G3A, JLHA2X1/G3A, JLHA3X1/G3A, JLHA4X1/G3A
JLHA1X2/G3A, JLHA2X2/G3A, JLHA3X2/G3A, JLHA4X2/G3A
Steel core aluminum alloy wire strand
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20141-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 20141-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20141-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20141-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 20141-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20141-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|