HOME   Cart(4)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 18852-2020 English PDF

US$454.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18852-2020: Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
Status: Valid

GB/T 18852: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 18852-2020English454 Add to Cart 5 days [Need to translate] Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams Valid GB/T 18852-2020
GB/T 18852-2002English954 Add to Cart 4 days [Need to translate] Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles Obsolete GB/T 18852-2002

PDF similar to GB/T 18852-2020


Standard similar to GB/T 18852-2020

GB/T 19348.1   GB/T 19096   GB/T 18851.2   GB/T 18851.1   

Basic data

Standard ID GB/T 18852-2020 (GB/T18852-2020)
Description (Translated English) Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J04
Classification of International Standard 19.100
Word Count Estimation 24,246
Date of Issue 2020-11-19
Date of Implementation 2021-06-01
Older Standard (superseded by this standard) GB/T 18852-2002
Quoted Standard ISO 5577; ISO 7963
Adopted Standard ISO 12715-2014, IDT
Regulation (derived from) National Standard Announcement No. 26 of 2020
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration
Summary This standard specifies the measurement method of the acoustic beam characteristics of the sound field in the workpiece when the probe is in contact with the workpiece. Probes include straight probes, oblique probes (refracted longitudinal waves and refracted transverse waves), focused probes and dual crystal probes. This standard recommends two metal reference test blocks, namely the semicircular step test block (HS test block) and the horizontal hole test block ((SDH test block). The diameter or side length of the probe chip is not more than 25 mm. This standard specifies the appropriate The measurement guide for the sound beam characteristics of probes used for detecting forged steel, rolled steel, aluminum alloy or titanium alloy products. The frequency range of probes applicable to this standard is 1 MHz��15 MHz. 1 MHz��5 MHz is the most suitable for steel products The frequency range of detection, 5 MHz��15 MHz is the most suitable frequency range for the detection of fine-grain structure products (such as aluminum alloy products)

GB/T 18852-2020: Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Non-destructive testing, ultrasonic testing, reference test block and method for measuring the acoustic beam characteristics of contact probes) ICS 19.100 J04 National Standards of People's Republic of China Replace GB/T 18852-2002 Non-destructive testing ultrasonic testing Reference test block and method for measuring sound beam characteristics of contact probe 2020-11-19 released 2021-06-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbols and abbreviations 1 5 Reference test block 3 6 Technology and process regulations 5 Appendix A (Normative Appendix) Time Baseline Setting (Range Setting) 16 Appendix B (Normative Appendix) Time-to-sound (TOF) characteristic curve of sound beam cross section 18 Appendix C (informative appendix) Deflection angle, far-field and near-field resolution 20 Reference 21

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 18852-2002 "Reference test block and method for non-destructive testing, ultrasonic inspection and measurement of acoustic beam characteristics of contact probes" Compared with GB/T 18852-2002, the main technical changes are as follows. ---Modified the scope (see Chapter 1, Chapter 1 of the.2002 edition); ---Modified normative reference documents (see Chapter 2, Chapter 2 of the.2002 edition); ---Added terms and definitions (see Chapter 3); ---Modified some symbols and their definitions, deleted the "focus diameter" symbol and its definition, and added the "focus width" symbol and its definition (See Chapter 4, Chapter 3 of the.2002 edition); ---Modified some abbreviations, modified "FSH", "T", "R", deleted "X, Y, Z", and added "Pi", "SDHi", "Note. SDH456" (see Chapter 4, Chapter 3 of the.2002 edition); --- "Sound beam profile and amplitude distribution diagram" is changed to "sound beam characteristic curve" (see Chapter 6, Chapter 5 of the.2002 edition); --- "Diffraction" is changed to "Interference" (see 6.1.1, 5.1.1 of the.2002 edition). The translation method used in this standard is equivalent to the ISO 12715.2014 “Non-destructive testing, ultrasonic testing, and measurement of acoustic beam characteristics of contact probes”. Exam blocks and methods. The Chinese documents that have a consistent correspondence with the international documents cited in this standard are as follows. ---GB/T 12604.1-2020 Non-destructive testing terminology Ultrasonic testing (ISO 5577.2017, IDT) ---GB/T 19799.2-2012 Non-destructive testing Ultrasonic testing No. 2 test block (IS07963.2006, IDT) This standard was proposed and managed by the National Standardization Technical Committee for Nondestructive Testing (SAC/TC56). Drafting organizations of this standard. Shanghai Institute of Materials, Changzhou Ultrasonic Electronics Co., Ltd., State Grid Xinjiang Electric Power Co., Ltd. Electric Power Research Institute. The main drafters of this standard. Xiao Xiao, Jiang Jiansheng, Ding Jie, Huang Yin, Ma Jun, He Cheng. The previous versions of the standard replaced by this standard are as follows. ---GB/T 18852-2002. Non-destructive testing ultrasonic testing Reference test block and method for measuring sound beam characteristics of contact probe

1 Scope

This standard specifies the measurement method of the acoustic beam characteristics of the sound field in the workpiece when the probe is in contact with the workpiece. Probes include straight probes and oblique probes (Refracted longitudinal wave and refracted transverse wave), focusing probe and double crystal probe. This standard recommends two metal reference test blocks, namely semicircular stepped test blocks (HS test block) and horizontal hole test block (SDH test block). The diameter or side length of the probe element shall not exceed 25mm. This standard specifies the measurement guidelines for the acoustic beam characteristics of probes suitable for testing forged steel, rolled steel, aluminum alloy or titanium alloy products. This standard applies The frequency range of the probe used is 1MHz~15MHz. 1MHz~5MHz is the most suitable frequency range for steel product testing. 5MHz~15MHz is the most suitable frequency range for the detection of fine-grain structure products (such as aluminum alloy products). If this standard is applied to inspections other than steel products, inspectors should note that the sound speed of the material is different from the sound speed of steel, and at the same time, the The nominal refraction angle of the head is usually designed for inspection in steel. This standard gives Snell's law so that inspectors can calculate other isotropic sums Refraction angle in fine-grained materials. This standard applies to oblique probes, focus probes and dual crystal probes whose actual refraction angle ranges from 0° to 70°. This standard does not apply to surface wave (Rayleigh) probes. This standard does not involve the use of flat-bottomed test blocks to evaluate the lack of equivalent dimensions. This standard does not stipulate the acceptance clause, but it is the inspection personnel system The acceptance clauses for determining the performance of the probe establish a technical basis.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. ISO 5577 Nondestructive Testing Ultrasonic Testing Terminology ISO 7963 Nondestructive Testing Ultrasonic Testing No. 2 Test Block

3 Terms and definitions

The terms and definitions defined by ISO 5577 apply to this document.

4 Symbols and abbreviations

4.1 Symbols The symbols listed in Table 1 apply to this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18852-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18852-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18852-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18852-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 18852-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18852-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.