|
US$119.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15328-2019: Classical V-belts fatigue test - Non-loading method
Status: Valid GB/T 15328: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15328-2019 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Classical V-belts fatigue test - Non-loading method
| Valid |
GB/T 15328-2019
|
| GB/T 15328-2009 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Classical V-belts -- Fatigue test -- Non-loading method
| Obsolete |
GB/T 15328-2009
|
| GB/T 15328-1994 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Classical V-belts--Fatigue test (non-loading method)
| Obsolete |
GB/T 15328-1994
|
PDF similar to GB/T 15328-2019
Basic data | Standard ID | GB/T 15328-2019 (GB/T15328-2019) | | Description (Translated English) | Classical V-belts fatigue test - Non-loading method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G42 | | Classification of International Standard | 21.220.10 | | Word Count Estimation | 6,658 | | Date of Issue | 2019-10-18 | | Date of Implementation | 2020-09-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 15328-2019: Classical V-belts fatigue test - Non-loading method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Classical V-belts fatigue test--Non-loading method
ICS 21.220.10
G42
National Standards of People's Republic of China
Replace GB/T 15328-2009
Ordinary V-belt fatigue test method without torque method
Published on.2019-10-18
2020-09-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 15328-2009 "Common V-belt fatigue test method without torque method". With GB/T 15328-2009
In addition to the editorial changes, the main technical requirements are changed as follows.
--- Revised the test pulley size (see 4.1,.2009 version 4.1);
--- Revised the description of the material requirements for the test pulley (see 4.2, 4.2 of the.2009 edition);
--- Revised the description of the surface roughness requirements on both sides of the wheel groove (see 4.3, 4.3 of the.2009 edition).
This standard was proposed by the China Petroleum and Chemical Industry Federation.
This standard is under the jurisdiction of the National Technical Committee for Pulley and Belt Standardization (SAC/TC428).
This standard was drafted. Ningbo Fulong Synchronous Belt Co., Ltd., Maanshan Ruisheng Industry and Trade Co., Ltd., Wuxi Zhonghui Rubber Technology Co., Ltd.
Company, Jiangsu Mingzhu Testing Machinery Co., Ltd., Qingdao Product Quality Inspection Technology Research Institute.
The main drafters of this standard. Deng Ying, Pan Hairui, Liu Zhigang, Zhu Shusheng, Zhu Anming, Hao Yongliang.
The previous versions of the standards replaced by this standard are.
---GB/T 15328-1994, GB/T 15328-2009.
Ordinary V-belt fatigue test method without torque method
1 Scope
This standard specifies the fatigue test method for testing ordinary V-belts for industrial use under conditions where the laboratory does not apply torque.
This standard is applicable to the A-type and B-type ring-shaped ordinary V-belts (hereinafter referred to as "V-belts") used in general transmissions.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 11356.1 belt drive V pulley (reference width system)
GB/T 11357 pulley material, surface roughness and balance
3 devices
The fatigue testing machine (see Figure 1) is a two-wheel testing machine. Includes a drive wheel and its drive, a driven wheel, and a pair of
a V-belt tensioning device for applying tension, a center distance variation test device, a V-belt test life time recording device, and
A drive wheel speed measuring device.
Description.
1---drive wheel;
2---V belt;
3---driven wheel.
Figure 1 Schematic diagram of fatigue testing machine
4 pulley
4.1 Test pulley (see Figure 2) and the size of the wheel groove according to the provisions of Table 1, the pulley groove test is carried out in accordance with the provisions of GB/T 11356.1.
|