|
US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11313.9-2013: Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11313.9-2013 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors
| Valid |
GB/T 11313.9-2013
|
PDF similar to GB/T 11313.9-2013
Basic data | Standard ID | GB/T 11313.9-2013 (GB/T11313.9-2013) | | Description (Translated English) | Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L23 | | Classification of International Standard | 33.120.30 | | Word Count Estimation | 21,287 | | Older Standard (superseded by this standard) | GB/T 15887-1995 | | Quoted Standard | GB/T 11313.1-2013 | | Adopted Standard | IEC 60169-9-1978, NEQ | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies two general and 0 connector mating interface dimensions, standard testing requirements, product ratings and characteristics, as well as all the detailed specification applies to SMC series connectors from GB/T 11313. 1-2013 selecte | GB/T 11313.9-2013: Radio-frequency connectors -- Part 9: Sectional specification for SMC series R.F. coaxial connectors
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio-frequency connectors Part 9. Sectional specification for SMC series RF coaxial connectors
ICS 33.120.30
L23
National Standards of People's Republic of China
Replacing GB/T 15887-1995
RF Connectors
Part 9. SMC Series RF coaxial
Connector specification
Part 9. SectionalspecificationforSMCseriesR.F.coaxialconnectors
(IEC 60169-9. 1978, Radiofrequencyconnectors-Part 9. RFcoaxial
connectorswithinnerdiameterofouterconductor3mm (0.12in) with
screwcoupling-Characteristicimpedance50ohms (TypeSMC), NEQ)
Issued on. 2014-06-15 2013-12-17 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 mating interface and standard gauge 1
3.1 universal connector (Level 2) 1
3.1.1 Pin Connector 1
3.1.2 jack connector 2
3.2 standard gauge 4
3.2.1 jack connectors for standard gauge 4
3.3 Standard Test Connectors (0) 4
3.3.1 Standard Test Connectors 4 Pin
3.3.2 Standard Test jack connector 5
4 quality assessment procedures 7
4.1 General 7
4.2 ratings and characteristics 7
4.3 List of test and inspection requirements 10
4.3.1 Settlement Test 10
4.3.2 Test cycle 10
4.3.3 program 12
5 to develop a detailed specification of the guide 12
5.1 General 12
5.2 Detailed specification of identification 12
5.3 Identification of components 12
5.4 Performance 13
5.5 mark, order documents and related matters 13
5.6 test, the test conditions and the severity of selection 13
5.7 SMC Series RF coaxial connectors - Blank detail specification format 13
Foreword
GB/T 11313 "RF connector" is divided into the following sections.
--- Part 1. Generic specification and test methods - General requirements;
--- Part 2. RF coaxial connectors 9.52 specification;
--- Part 9. SMC Series RF coaxial connector specification;
...
This section GB/T Part of 911,313.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 15887-1995 "SMC RF coaxial connectors."
This section compared with the GB/T 15887-1995, the main technical changes are as follows.
--- Remove the "model name", "type A Summary," "Dimension" and "signs, packaging, transport and storage" (see GB/T 15887-
1.3,3.1.4,3.1.5 and Chapter 5, 1995);
--- The corresponding increase ratings and characteristics (see 4.2);
--- Added "to develop a detailed specification guidelines" (see Chapter 5);
--- Increased "SMC series connector Blank Detail Specification Format" (see 5.7).
This section uses redrafted law reference IEC 60169-9. 1978 "RF Connectors Part 9. 3mm inner diameter of the outer conductor
(0.12in), a nominal impedance of 50Ω, threaded connection of RF coaxial connectors (SMC type) "(English Version) (including repair orders 1.1996)
Preparation, and IEC 60169-9. 1978 (including repair orders 1.1996) is equivalent to the degree of non-conformity.
This part of IEC 60169-9. 1978 (including repair orders 1.1996) The main differences are as follows.
--- Remove the "IEC model named" "rating", "preferred climatic categories", "Architectural Overview", "Dimensions" and "Type Test
List "(see IEC 60169-9. 1978 first 2,3,4,7,8 and 9);
Repair Order 1978 of 1.. --- IEC 60169-9 1996 in "10.2 rating and characteristics of" bad reflection coefficient index, into this section
Line increase (see Table 6).
Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents.
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190).
This section is drafted. Xi'an Fujitec Technology Co., Ltd., China Electronics Standardization Institute.
The main drafters of this section. Yangqiu Li, Wuxiang Wen, Wu Zhengping.
This part of the standard replaces the previous editions are.
--- GB/T 15887-1995.
RF Connectors
Part 9. SMC Series RF coaxial
Connector specification
1 Scope
GB/T 11313 provisions of this part of the level 2 and 0 Universal connector mating interface dimensions, standard gauge testing requirements, the amount of product
Setting and features, as well as detailed specifications from all test GB/T 11313.1-2013 select the applicable series of connectors in a SMC
Lanbiao and inspection requirements.
This section applies to SMC Series RF coaxial connector having a threaded coupling mechanism, a nominal impedance of 50Ω, for low-power should be
Use the occasion, connected with a variety of RF cables or mating microstrip. This connection uses the frequency to at least 6GHz.
This section presents the development of SMC Series RF coaxial connector detail specification and content rules, and blank detail specification format.
This section shows the recommended performance characteristics when preparing a detailed specification should be considered, including the M-Class and H-level assessment level
List of test and inspection requirements.
This part of the original size in inches, not all note sizes graphical structure for reference only.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11313.1-2013 RF connectors - Part 1. Generic specification - General requirements and test methods (IEC 61169-1.
1998, IDT)
3 mating interface and standard gauge
3.1 universal connector (Level 2)
3.1.1 pin connector
Pin connector interface shown in Figure 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11313.9-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 11313.9-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 11313.9-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11313.9-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|